Table of Contents
Advertisement
9.9.12 CEC connection
Menu
Top→OUTPUT SETTING→CEC CONNECTION
Setting for
Each output channel
Setting value
・NOT CONNECTED [Default]
・IN1 to IN6
You can set the CEC connection for when CEC-supported device is connected to HDMI input connector.
Press the MENU/SET key to apply the setting.
Notes:
・Using CEC may cause negative effects. If you do not use CEC, set this menu to "NOT CONNECTED". If the
status of the sink devices connected to the HDMI output connector changes (such as being turned OFF→
ON) or if the CEC connection changes, the EDID may also need to be changed (the MSD changes it
automatically) in order to update the address of the connected device. When the EDID is changed, the
source device stops outputting video temporarily.
・CEC connection is a one-on-one basis; it cannot connect multiple inputs and outputs. If you set multiple
outputs to connect to the same input, only a smaller output number is connected preferentially and other
outputs are not connected.
9.9.13 HDCP re-authentication
Menu
Top→OUTPUT SETTING→HDCP AUTHORIZATION
Setting for
Each output channel
If an HDCP-compliant sink device is connected, HDCP is authorized automatically. You can re-authorize
HDCP manually using this function.
Press the MENU/SET key to perform the re-authentication.
・SELECTED CHANNEL
MSD-62 Series User's Guide
95
Advertisement
Table of Contents
