Table of Contents
Advertisement
6.8
Factory reset
You can restore settings of "6.1 Selecting input channels", "6.6 Locking/unlocking front keys", and "7
Settings" to the factory default by turning on the MSD while pressing the ESC key.
Hold the ESC key until you hear long-tone buzzer sound. The sound stops when the initialization is completed,
and the MSD starts its normal operation.
Note:
Once you restore the settings to the factory default, you cannot put them back to the previous (user) settings
*
1: Set for each output (common to OUTA/OUTB); 2: Set for each output;
3 Set for each output (only OUTA); 4: Set for each input port/input signal;
5: Set for each input; 6: Set for each output/bitmap;
7: Set for each digital input/analog input, each input signals (only digital input)
Function
INPUT CHANNEL
RESOLUTION
MONITOR ASPECT
INPUT ASPECT
ASPECT PROCESS
INPUT OVER SCAN
INPUT POSITION
INPUT SIZE
INPUT MASKING
OUTPUT POSITION
OUTPUT SIZE
OUTPUT MASKING
BACKGROUND COLOR
TEST PATTERN
MULTI DISPLAY
INPUT BRIGHTNESS
INPUT CONTRAST
INPUT HUE
INPUT SATURATION
SETUP LEVEL
OUTPUT BRIGHTNESS
OUTPUT CONTRAST
[Table 6.1] Factory default (1/5)
Factory default
Channel selection: INPUT OFF
SWITCHING MODE: V&A
AUTO(Set automatically from EDID)
RESOLUTION (Aspect ratio of output resolution)
AUTO-1
LETTER BOX or SIDE PANEL
NTSC: 105%
HDTV/VESA(PC): 100%
Horizontal/Vertical: 0
Horizontal/Vertical: The number of pixels of output
resolution
Left/Top: 0
Right/Bottom: The number of pixels of output resolution
(without masking)
Horizontal/Vertical: 0
Horizontal/Vertical: The number of pixels of output
resolution
Left/Top: 0
Right/Bottom: The number of pixels of output resolution
(without masking)
R/G/B: 0 (black)
Pattern output: OFF
Scroll: OFF
OFF
100%
R/G/B: 100%
0°
100%
0.0%
100%
R/G/B: 100%
34
MSD-804FD User's Guide
Set for each
I/O/bmp*
1
1
1
4
4
4
4
4
4
1
1
1
1
1
-
4
4
4
4
4
1
1
Advertisement
Table of Contents
