Cabling; Cables; Dvi-I Input Connector - IDK MSD-72 Series User Manual

7.2 Cabling

When connecting the MSD to the external devices, please observe the following precautions.
・Read manuals of the external devices.
・ Before you connect the cable to the MSD or an external device, please remove electrification of the
body by touching the metal around that is grounded.
・Turn off all units power before connecting the cable.
・Be sure to plug cables completely and install them without any stress on connectors.
・Fix HDMI cables using cable clamps to prevent those cables from falling off.
Fixing HDMI cable using cable clamp
Removing HDMI cable and cable clamp

7.2.1 Cables

Use the right cable depending on the system configuration.
For analog audio and RS-232C, process cables to match the connectors as needed.

7.2.2 DVI-I input connector

29-pin DVI-I female connectors are used for DVI input connerctors.
① ②
① ②
[Figure 7.1] Attaching a cable clamp
23
MSD-72 Series User's Guide
③ ④
③
④
Pull out while pressing
【See: 7.2.3 Connecting audio cables】
【See: 7.2.4 Connecting RS-232C cable】
⑤