Table of Contents
Advertisement
7.8.7
Sampling frequency of analog audio input [SAMPLING FREQUENCY]
You can set the sampling frequency for when analog audio input signals (you set "7.8.3 Audio input
selection [AUDIO INPUT SELECT]" to "ANALOG") are output to digital audio. If you set it to "AUTO-A" or
"AUTO-B", the maximum sampling frequency supported by the connected display device is output.
* If you select "AUTO", the MSD determines the sampling frequency based on the EDID (see "7.9 EDID
(Extended Display Identification Data)" for details) of the display device and displays the output
frequency in parentheses of the VFD screen.
If the MSD cannot load the EDID from the display device, it outputs signals with the last-used sampling
frequency, and displays an "*" following the sampling frequency that is actually output.
・AUTO-A [Default]
・AUTO-B
1. To set the sampling frequency for the selected analog audio input using menu:
MSD-804FD
↓ SET key
[FUNCTION SELECT]
AUDIO
↓ SET key
[AUDIO]
SAMPLING FREQUENCY
↓ SET key
[OUT1 FREQUENCY]
AUTO-A(48kHz)
↓ ESC key: Returns to the previous screen
2. To set the sampling frequency for the selected analog audio input using commands:
@SSF: Set sampling frequency of analog audio input
@GSF: Get sampling frequency of analog audio input
@GFD: Get actual sampling frequency of analog audio input
[OUT1 FREQUENCY]
AUTO(48kHz)
[EDID can be loaded]
・32kHz
・44.1kHz
Top
▲▼keys: Select "AUDIO".
▲▼keys: Select "SAMPLING FREQUENCY".
keys: Set the sampling frequency.
◄►keys: Select the desired output (OUT1 to OUT4).
[OUT1 FREQUENCY]
AUTO(48kHz)*
[EDID cannot be loaded]
・48kHz
・192kHz
・96kHz
117
MSD-804FD User's Guide
For each output
(common to OUTA and OUTB)
*
Advertisement
Table of Contents
