Audio Output Connector; Digital Audio Output Connector; Multi Channel Audio Output - IDK MSD-702UHD User Manual

MSD-701UHD / 702UHD / 801UHD/ 802UHD User's Guide

9.9.7 Audio output connector

Menu Top→AUDIO→AUDIO OUTPUT
Setting for Each output channel (OUTA / OUTB)
Setting value [Table 9.11] Settings of audio output control
You can control the audio outputs of the audio output connector, HDMI output connector, and HDBaseT
output connector.
Setting value
ANALOG&DIGITAL [Default]
ANALOG
DIGITAL
*If "DVI MODE" is selected for "9.8.1 Output mode", audio is not output to the HDMI output connector
regardless of the setting of this menu.

9.9.8 Digital audio output connector

Menu Top→AUDIO→DIGITAL OUTPUT
Setting for Each output channel (OUTA / OUTB)
Setting value ON [Default] OFF
You can control the audio outputs of the HDMI output connector and HDBaseT output connector.
The MSD distributes the same audio to the HDMI output connector and HDBaseT output connector. You can
enable /disable the audio output for each connector.

9.9.9 Multi channel audio output

Menu Top→AUDIO→MULTI AUDIO
Setting for Each output channel (Common to OUTA / OUTB)
Setting value
・DOWN MIX [Default]
・CH1/CH2 STEREO
・CH3/CH4 STEREO
You can select audio to be output to a sink device that does not support multi-channel linear PCM or analog
audio for when multi-channel linear PCM audio is input from an HDMI input connector.
You can select audio from "DOWN MIX" (multi-channel audio is down mixed), "STEREO" (stereo audio), or
"MONO" (monaural audio).
80
[Table 9.11] Settings of audio output control
Analog audio
output connector
Can be output
Can be output
Cannot be output
・CH5/CH6 STEREO
・CH7/CH8 STEREO
・CH1/CH2 MONO
HDMI
output connector
Partly*
Cannot be output
Partly*
・CH3/CH4 MONO
・CH5/CH6 MONO
・CH7/CH8 MONO
HDBaseT
output connector
Partly*
Cannot be output
Partly*