Table of Contents
Advertisement
9.7 Output settings
9.7.1 Output mode
Top → OUTPUT SETTING → OUTPUT MODE
Menu
Setting for
Each output channel
Setting value
・HDMI YCbCr 4:4:4 MODE [Default]
・HDMI YCbCr 4:2:2 MODE
・HDMI YCbCr 4:2:0 MODE
You can select an output signal mode and color space of the output video. The MSD outputs selected mode,
however, if the connected sink device has optimal output mode and color space, the MSD outputs optimal
output mode signal for the connected sink device. With "HDMI YCbCr 4:2:0 MODE", YCbCr 4:2:0 has priority
if the signal is 4K@60 / 59.94 / 50, and with other resolutions, YCbCr 4:4:4 has priority.
Higher priority
HDMI YCbCr 4:4:4 MODE
HDMI YCbCr 4:2:2 MODE
HDMI YCbCr 4:2:0 MODE
HDMI RGB MODE
Lower priority
DVI MODE
Note:
If "DVI MODE" is selected, the MSD can output DVI signal at 1080p, QWXGA, or lower resolution. For other
resolutions, it outputs signal at the appropriate resolution of the connected sink device.
9.7.2 Synchronous signal output with no input video
Top → OUTPUT SETTING → SYNC OUTPUT
Menu
Setting for
Each output channel
Setting value ON [Default], OFF
You can set whether synchronous signal is output when no video signal is input from the selected input, or
when "OFF" is selected for the input. If you set this menu to "ON", you can prevent the sink device from being
switched to the standby mode.
9.7.3 Output video with no input video
Top → OUTPUT SETTING → VIDEO OUTPUT
Menu
Setting for
Each output channel
Setting value
・BLUE [default]
You can set the color of the video to be output when no video signal is input from the selected input. The
setting will be valid when "9.7.2 Synchronous signal output with no input video" is set to "ON".
・BACKGROUND COLOR
73
MSD-72 Series User's Guide
・HDMI RGB MODE
・DVI MODE
・BLACK
Advertisement
Table of Contents
