Method For Parking Machine - Komatsu HB365LC-3 Operation & Maintenance Manual

MACHINE OPERATIONS AND CONTROLS
REMARK
The machine with the auto-greasing system require one time
lubrication each time the bucket is changed.
Lubricate at the bucket linkage and at the grease metering
valve as indicated until grease comes out from the end faces.
It will be necessary to replace the plug at the grease metering
valve with a grease nipple during lubrication. The plug must be
replaced after lubrication.
Grease metering valve for the standard machine

METHOD FOR PARKING MACHINE

k k
• Stop the machine gradually. Avoid a sudden stop.
• Place the machine on a firm and level place.
Do not park the machine on a slope.
Block the tracks from movement if it is unavoidably
necessary to park the machine on a slope. As an addi-
tional safety measure, thrust the work equipment into
the ground.
• The machine may move suddenly if the control lever is
touched by accident. This may lead to a serious per-
sonal injury or death. Set the lock lever securely to
LOCK position always before leaving the operator's
seat.
3-214
WARNING
OPERATION