Table of Contents
Advertisement
FILE MENU
REMARK
You can create the sloping plane surface file by the following
methods, instead of measuring the points "A" and "B" on "Slop-
ing Plane Surface" screen.
•
Method 1
Set the point saved in the internal memory of the control
box as points "A" and "B" by "Set points".
•
Method 2
Input the "Point on Surface" and "Main-fall (A -> B)" direct-
ly.
(You can set the control point for surface by "Take a topo
shot" or "Set points" as well.)
METHOD FOR CREATING CROWN ROAD SURFACE FILES
When creating a crown road surface file, perform the following procedure.
1.
Press the power ON/OFF and menu switch to display the
main menu.
2.
On "File" menu, press "Surfaces..." and select.
3.
On "Project Surfaces" screen, press "New...".
4-30
HANDLE CONTROL BOX
AJD02599
Advertisement
Chapters
Table of Contents
