Advertisement
･
When 6 or more problem elements have been
detected, the names of the 6th and subsequent
problem elements are omitted and the total
count of the detected problem elements is
displayed.
Display of the scan result
Warning level/
Message
Warning Level 0
Warning Level 1
Warning Level 2
Warning Level 3
Warning Level 4
INFORMATION
In case some problem is detected through scan in the
●
i-
ppli set as the i-
ppli standby display and activating
α
α
i-
ppli is stopped, the i-
α
α
canceled.
Handling method
OK ：Continues
processing of the
started application.
Detail：Lists names of the
detected problem
elements.
Yes ：Stops processing of
the started
application that may
cause troubles.
：Continues
No
processing of the
started application.
Detail：Lists names of the
detected problem
elements.
OK ：Stops processing of
the started
application that may
cause troubles.
Detail：Lists names of the
detected problem
elements.
Yes ：Deletes data that
may cause troubles.
：Stops processing of
No
the started
application that may
cause troubles.
Detail：Lists names of the
detected problem
elements.
OK ：Deletes data that
may cause troubles.
Detail：Lists names of the
detected problem
elements.
ppli standby display is
Checking the pattern definition version
Press m8374
1
Main specification
Item
FOMA D902iS
Size (mm)
110 (H) x 49 (W) x 19.9 (D) (when
closed)
Weight (g)
Approx. 124 (with battery pack)
Continuous
While standing still:
standby time
Approx. 550 hours
While moving:
Approx. 380 hours
Continuous call
During a voice call:
time
Approx. 170 minutes
During a videophone call:
Approx. 90 minutes
Type of battery
Lithium ion battery
pack
Capacity of
790 mAh
battery
Charging time
Approx. 120 minutes
Camera pixels
Out-camera:
Effective pixels: 2M
(Max record pixels: 4M)
In-camera:
Effective pixels: 0.10M
(Max record pixels: 0.10M)
Digital zoom
Out-camera : up to 28 times
In-camera : up to twice
･
Continuous call time is an estimate of call time of
FOMA terminal when it can send or receive signals
normally.
･
Continuous standby time is an estimate of
operation time of FOMA terminal when it is closed
and able to receive signals normally. The call/
standby time may be reduced to about half,
depending on the amount of charge in the battery,
the function settings, the ambient temperature and
signal conditions (radio waves do not or hardly
reach). Using i-mode communication reduces the
call (communication)/standby time. Even if you do
not make a call or use i-mode, the call
Scan Version
Next
463
Advertisement
Chapters
