Advertisement
2
Select each item to set
Speed selector：Set whether to enable the rotating operation of the Speed Selector. When OFF is set, the
rotating operation is disabled, and Direction and Use at stand-by disp cannot be set.
Direction：
Set the rotating direction of the Speed Selector. Select Clockwise or Anticlockwise.
Use at stand-by disp：
Select the function to be executed when the Speed Selector is rotated on the standby display.
･
When Menu is set, the menu is displayed.
･
When Phonebook is set, the phonebook list is displayed.
･
When Scheduler is set, the calendar screen of Scheduler is displayed.
･
When OFF is set, no function will be executed.
Press p
3
･
When Change image is set to Speed selector in Random Display Image, if you set Use at stand-by disp to
other than OFF, a confirmation screen appears. Select Yes to change the setting.
INFORMATION
Even if Speed selector is set to OFF, some i-
●
Even if Speed selector is set to ON and Speed selector in Settings (for i-
●
be operated by rotating the Speed Selector.
When adjusting the volume, zooming in and out or increasing and decreasing values, the setting for Direction is
●
disabled. In this case, rotating the Speed Selector to the right increases the volume/display magnification/value and
rotating to the left decreases it. In addition, the setting for Direction is disabled for some i-
Reading the display
The description of icons displayed at the top or the bottom of the display are shown below:
Received i-channel information
When you use i-channel, if Show ticker is set to Yes in
Ticker Setting, the received i-channel information is
displayed as ticker on the standby display. ☛P292
Battery level ☛P45
a
:
b
Received signal level ☛P46
:
Out of service area ☛P46
:
Self Mode is set ☛P160
:
ppli may be operated by rotating the Speed Selector.
α
ppli) is set to other than OFF, some i-
α
a
m
-
c
Date, day
d
of the week
*1
and time
e
n
*1
o
y
-
f
*1
ppli.
α
During data transfer ☛P332, P347
:
In the miniSD mode ☛P342
Data link software in progress ☛P444
In i-mode communication (during
:
i-mode connection) ☛P200
In i-mode communication (during
:
packet communication) ☛P214, P239
During infrared communication ☛P347
:
Infrared remote control function in
operation ☛P351
Key Lock is set (in gray when Key Lock
:
is temporarily released) ☛P164
Speakerphone function in operation
:
☛P51
Connecting to USB handsfree
:
compatible equipment ☛P62
Total call cost exceeds the maximum
：
limit ☛P383
Accessing the phonebook on the
：
network (PushTalkPlus) ☛P96
During PushTalk calls ☛ P96
：
i-mode Mail and Message R/F storage
:
space is full in the Center
Next
ppli cannot
α
*2
☛P240, P214
29
Advertisement
Chapters
