Advertisement
When mail arrives in the i-mode Center
･
Even if i-mode Mail is stored in the i-mode Center,
the mail ring alert or vibrator is not activated.
Press any key other than b to clear the message.
･
INFORMATION
During All Lock, Omakase Lock or PIM Lock, the
●
notification message does not appear for mail coming to
the i-mode Center.
Even if Receive Option Setting is on, all i-mode Mail in
●
the i-mode Center is received when Check i-mode
Message is performed. If you do not want to receive mail,
unselect the mail in Message Retrieval Setting.
SMS and Message R/F are received automatically even
●
if Receive Option Setting is on.
Selecting mail to receive
You can check the subjects of i-mode Mail stored at
the i-mode Center and select mail to receive or delete
mail at the i-mode Center before receiving it.
･
To select mails to receive, set Receive Option
Setting to ON in advance. When ON is set,
i-mode Mail is not received automatically.
a63
1
保留
2
Select
(Hold) for each mail
受信
削除
(Receive),
･
保留
When
is selected, the mail is stored at the
i-mode Center. It can be received by using
Check i-mode Message, etc.
･
To delete all mails stored at the i-mode Center,
削除
ｉモードセンターから全ての
select
for
メールを
(All mails from the i-mode Center).
When Receive Option
Setting is set to ON,
incoming i-mode Mail is
stored in the i-mode
Center and the message
shown on the left appears.
Menu 163
You are connected to
the i-mode Center and
the list of i-mode Mail
stored appears.
: Image attached
: Melody attached
: i-motion attached
: ToruCa attached
z
Select
保留
(Delete) or
･
When the mail list has more than one page,
前ページ
select
(Previous page) and
(Next page) at the end of the list to view the
previous and next pages.
受信
削除
3
Select
／
決定
Select
(OK)
Menu 161 / Menu 25 /
Checking for i-mode Mail
You can check whether i-mode Mail has been
delivered to the i-mode Center while FOMA
terminal was out of the service area or turned off.
Also check for Message R/F at the same time if it
is set so in Message Retrieval Setting.
･
Depending on the signal condition, you may not
be able to perform Check i-mode Message.
Operate the terminal in locations with good radio
wave conditions.
Press aa
1
Check i-mode Message is executed. If stored in
the i-mode Center, i-mode Mail is received.
･
The operation on the reception result screen is
the same as for auto reception. However, the
screen does not return to the previous screen
after about 15 seconds.
Replying to received i-mode Mail
･
You may not be able to reply to some received
mail.
･
You cannot reply to the SMS for which User unset,
Payphone or Not supported is displayed in the
sender field.
･
Mail Reply Format allows you to set whether to
quote the message in a reply mail and to select
the character to be inserted at the beginning of
the quoted message.
次ページ
z
(Receive/Delete)
!
?
61 /
5
Check i-mode Message
Reply to Mail
Next
241
Advertisement
Chapters
