Foma D902iS Manual page 276

The sound volume for i-
● α
ppli effect sound. However, sound effect is unavailable
i- α
for some i- ppli.
α
To i- ppli creators
● α
If i- ppli being created does not operate normally, trace
α
display may help. Pressing m334 on the
standby display displays the trace. Note that trace
information cannot be displayed if i-
record trace information is not saved.
To delete the trace information, press p and select Yes.
Displaying history when operation finishes
without using saved data
When i- ppli ended because of an error such that
α
i- ppli cannot use the saved data, the name of
α
i- ppli, date and time, cause of the security error is
α
recorded.
･
Up to 20 errors are recorded in the security error
history. When there are more than 20 abnormal
exits, the 21st exit is written over the oldest one.
Press m333
1
Deleting the history: p
■
Displaying i- ppli detail information
α
Detail information such as the name and version of
i- ppli can be checked.
α
d (for over a second)
1
z
2 Highlight i- ppli
α
･
The displayed items differ depending on
i- ppli.
α
･
For i- ppli downloaded from SSL pages, you
α
can check the site certificate by pressing p
on the software description screen.
Setting the operating conditions of i-
･
Items that can be set vary depending on i-
･
This function is unavailable for i-
items to be set.
d (for over a second)
1
z
2
Highlight i- ppli
α
3 Select each item to set
274
ppli operation can be set by
ppli created to
α
Security Error History
z
Select Yes
Detail Info
z
Select a folder
Press p
ppli
α
Settings
ppli.
α
ppli having no
α
z
Select a folder
m7
Speed selector：
You can set rotary selector functions of
Speed Selector to be used while i-
running.
･
When Up and down is set, you can use
Speed Selector in the same way as %.
･
When Right and left is set, you can use
Speed Selector in the same way as &.
･
When OFF is set, rotation of Speed
Selector is invalidated.
･
Rotary selector functions cannot be set
when Speed selector of Set speed selector is
set to OFF.
Set i - α ppli display：
Used to set whether to set i-
supports i- ppli standby display as your
α
standby display.
･
Only one i- ppli application can be set.
α
Set NW transmission during i
Used to set whether to allow automatic
connection while the i-
is operating.
Set NW transmission：
Used to set whether to allow automatic
connection while i- ppli is running.
α
Use icons：
Specifies whether to enable i-
icons for mail, Message R/F, remaining
battery level, Silent Mode and reception
level.
Start from browser：
Used to set whether to start i-
sites (i- ppli To).
α
Start from mailer：
Used to set whether to start i-
(i- ppli To).
α
Start from external：
Used to set whether to start i-
external devices (i- ppli To).
α
Allow ring tone/image changes by software*
Specifies whether to allow i-
the settings of ring tones or images on the
screen such as the standby display.
1 ：
Confirm all changes*
Specifies whether i-
α
confirmation screen each time the settings
of ring tones or images are changed.
Allow access to phonebook/call records by software*
Specifies whether to allow i-
the phonebook, redial data and received call
history.
･
This also applies to ToruCa saved in
FOMA terminal.
*1 This setting is available only for i-
ppli is
α
ppli which
α
- α ppli display：
ppli standby display
α
ppli to use
α
ppli from
α
ppli from mail
α
ppli from
α
1 ：
ppli to change
α
ppli displays a
1 ：
ppli to refer to
α
ppli DX.
α