Advertisement
3
Enter any connection name in
Click OK
4
Enter a fictional phone number (such as 0) for
電話番号
, select FOMA D902iS from
方法
(Connection procedure)
･
市外局番
Since
(Area code) does not effect the
dialup connection (APN) setting, it is not
necessary to change.
5
Click
キャンセル
screen appears
6
Enter the dialup connection (APN)
･
Enter in the format "AT + CGDCONT =<cid>,
"PPP", "APN"".
<cid> : Enter any number between 2, 4 to 10.
"PPP" : Enter "PPP".
"APN" : Enter the dialup connection (APN) in
quotation marks.
z
名前
接続
z
Click OK
when the connection
z
Press
If OK appears, the dialup connection (APN) has
now been set.
■
Resetting the dialup connection (APN)
settings:
AT + CGDCONT =
Reset all cids.
･
The settings are restored to the default
settings for <cid> = 1 and 3, and the
settings for <cid> = 2, 4 to 10 are
cleared.
AT + CGDCONT=<cid>
Reset the specified cid
■
Checking the dialup connection (APN)
settings:
AT + CGDCONT?
For details ☛P30
･
■
When nothing is displayed even if AT
command is entered: ATE1
･
For details ☛P28
7
Check that OK is displayed and click
ファイル
and
了
(End HyperTerminal)
･
現在、接続されています。切断してもよ
After
ろしいですか？
appears, click
･
と名前付けされた接続を保存しますか
"XXX"
(Save the connection named "XXX"?) appears.
いいえ
Click
.
Dialup connection (APN) and
registration number (cid)
The dialup connection (APN) for packet
communication can be set for registration numbers
between cid1 to 10 in FOMA terminal. By default,
"mopera.ne.jp" is set for cid1 and "mopera.net" for
cid3. For connecting to other providers or corporate
LANs, register the dialup connection (APN) for cid2, 4
to 10.
16
ハイパーターミナルの終
(Connecting now. Disconnect?)
はい
Next
?
Advertisement
Chapters
