Advertisement
Alarm indication while another function is
being used
Function
During a call or
A warning tone sounds. The Enter
PushTalk call
key does not flash and the vibrator
does not vibrate. In case of a
PushTalk call, the floor acquisition
is released to disable you to talk.
On-hold
The above operation takes place
after the end of the on-hold state.
During data
The alarm is issued after the end
transfer*
1
, while a
of the left-mentioned operation.
･
call or PushTalk call
If the schedule data is received
is ringing or being
via data communication when the
dialed, received or
scheduled date and times comes,
terminated
the schedule does not operate.
*1 Receiving/sending for packet communication is excluded.
Ringing the alarm clock at the set time
This function announces at the specified time with
the alarm clock sound, lighting or flashing of the
Enter key or the vibration.
･
Up to 9 alarms can be set.
Default not set
Setting the alarm clock time and sound
･
When Alarm Clock is on, the default settings are
as follows; Time: 00:00, Repeat: None, Alarm
sound: Terminal setting, Volume: Terminal setting,
Vibrate alert: Terminal setting, Light pattern:
Terminal setting, Light color: Terminal setting.
m73
1
1 to 9
2
･
is displayed on left of a title while setting
an alarm.
■
Canceling: Highlight the title from the
z
m
alarm list
･
To set the canceled alarm again: Highlight a
title from the alarm clock list
3
Select each item to set
368
Alarm indication
Alarm Clock
z
m
Time：
Enter the time to set an alarm.
･
Enter the time in the 24-hour clock. For
single-digit hours or minutes, precede the
digit with 0.
Repeat：
Select the repeat setting.
･
If None is set, the alarm is activated only
once.
･
If Every day is set, the alarm is activated
everyday.
･
If you select Day of week, select the Day/
Week to select the days of the week and
press p.
Title：
Up to 14 one-byte or 7 two-byte characters
can be entered.
･
The titles are set to
9
by default. If the title field is not entered,
the alarm cannot be set.
& to switch to Set sound screen
4
Select and set each item
Alarm sound：
Set the alarm clock sound to be issued at the
specified time.
･
When i-motion or Melody is selected,
select a video/i-motion file or a melody.
Playing and checking a melody or video/
i-motion ☛P129
･
If you select Terminal setting, the alarm sound
conforms to the setting of Sound Setting.
Volume：
Select the volume.
･
For details of operation when Set is
selected ☛P68
･
If you select Terminal setting, the alarm
volume conforms to the setting of Adjust
Volume.
& to switch to Set others screen
5
Select and set each item
Vibrate alert：
Set the vibration used at the set time.
･
If you select Select, select a vibrator type.
･
If you select Terminal setting, the vibration
conforms to the setting of Vibrator Setting.
目覚まし1
目覚まし
to
z
z
Advertisement
Chapters
