Press # on the still image shooting
1
screen or the video recording screen
Icon of the macro mode
Changing the settings for shooting
Scene mode/effect, brightness, color density,
white balance, shake reduction, frames, quality,
size restrictions, image size or flicker adjustment
can be set.
・
The following settings will be kept even if you
finish using Camera or Movie camera.
・
・
Brightness
Color density
・
・
Quality
Size restrictions
・
Flicker adjustment
Default SceneModes: Full auto Brightness: ±0
ColorDnsty: ±0 WhiteBalnc: Auto
ShakeReduc: Auto Frame: not set
Quality: (Still image) Standard (Video) STD
(Standard)
Size Limit: (Still image) None (Video) Msg
attach S Size: (Still image) 240 x 400 (standby)
(Video) 176 x 144 (QCIF) Adjust flicker: Auto
Example
Setting a frame
& to highlight the icon of frame on the
1
still image shooting screen or the video
recording screen
Icon of frame
・
Similarly, to change other settings than a
frame, highlight each icon.
Switches to the macro
mode and
is
indicated.
・
To cancel the
setting: #again
・
Shooting procedures
for still images and
videos are the same
as in normal
shooting.
・
Shake reduce
・
Image size
Name of icon
Current setting
Keypads of 1 to 9 and 0 are assigned
・
for each icon from the left. Icons can be
selected also by pressing the relevant keypad.
1:Scene mode/effect
2 :Brightness
4:White balance
6 :Frame
7 :Continuous shooting (only when
shooting still images) ☛P179
8 :Quality
0 :Image size
・
Flicker adjustment cannot be set by the icon.
Setting flicker adjustment ☛P191
% to switch between frames
2
・
To change other settings, switch between icons
with % and press o in the same manner.
・
For scene mode/effect, white balance, shake
reduction, frame, continuous shooting, quality,
size restrictions and image size, you can also
switch the value by pressing the corresponding
keys (1, 4 to 9, 0) and then
pressing o.
INFORMATION
& or dial keys are not available to change settings
●
when Still Camera or Movie Camera is started from the
phonebook or mail. To change the setting of the scene
mode/effect, brightness, color density, white balance,
shake reduction or flicker adjustment, press m and
select Scene mode/effect, Camera settings or Shake reduce
Auto (or Shake reduce OFF). The quality, size restrictions,
image size and frame cannot be set.
The settings cannot be changed when Still Camera or
●
Movie Camera is started from i-
shake reduction setting for Movie Camera can be
changed by pressing m and select Shake reduce Auto or
Shake reduce OFF.
Scene mode/effect
24 setting types are available according to color tone
and shooting situation.
For details of operation ☛P187
・
Full auto :
Standard scene mode/effect. Use this mode
normally.
Sensitivity up :
Enhances the camera sensitivity for shooting in
the dark.
Super sensitivity up :
Shoots a black-and-white picture even in a dim
light situation.
3 :Color density
5:Shake reduction
9 :Size restrictions
z
Press o
ppli software. However,
α
Next
187