Advertisement
Press p
4
To overwrite a saved template: a
･
z
template
Select Yes
･
The preinstalled templates cannot be
overwritten.
INFORMATION
When there is not enough available storage space or the
●
maximum number of saved items is exceeded, a
confirmation screen is displayed asking whether to
delete saved templates. Follow the instructions on the
screen and delete the template.
When a mail template downloaded from a site has a file
●
attachment, it cannot be saved until the attachment is
deleted.
When a mail template downloaded from a site has the
●
image that cannot be attached to mail or output from FOMA
terminal or the image that cannot be used on FOMA
terminal, it cannot be saved until the image is deleted.
Deleting templates
･
Preinstalled templates cannot be deleted.
Example
Deleting a template
a8
1
2
Highlight a template
Deleting selected templates: m22
■
z
Select templates
Deleting all templates: m23
■
Enter the terminal security code
3
Select Yes
Saving i-mode Mail for sending later
Saving unsent i-mode Mail
Maximum number of items that can be saved ☛P38
･
･
If none of address, subject, attachment or text is
entered, the mail cannot be saved.
Press m3 on the mail composition
1
screen
i-mode Mail is saved in the Unsent messages
folder of Unsent messages.
238
z
Select a
z
m21
z
p
z
Save Mail
Sending i-mode mail automatically inside the
service area
You can set i-mode mail composed outside the
service area to be sent automatically inside the
service area and save it.
･
Up to 5 items can be saved.
･
You cannot save without setting the receiver (To).
Press m2 on the mail composition
1
screen
The mail is saved as auto-send mail in the Unsent
messages folder of Unsent messages and
appears at the top of the screen.
Inside the service area
Auto-send mail is sent automatically.
auto-send mail is being sent and
all the auto-send mail items are sent.
･
When sending fails, the auto-send failure mail
remains in Unsent messages and
When there are no failure mail by deleting,
canceling the auto-send setting or exchanging the
UIM,
disappears.
INFORMATION
Auto-send mail is not sent automatically while editing the
●
signature.
Once auto-send mail fails to be sent, it is not sent
●
automatically inside the service area next time.
Canceling the auto-send setting for auto-send
mail/failure mail
1
Highlight the auto-send mail or failure mail
in the list of Unsent messages
Select Yes
INFORMATION
The auto-send setting is canceled even if an auto-send
●
mail item is selected in the list of Unsent messages.
When a failure mail item is selected in the list of Unsent
●
messages, the cause of the error is displayed. Pressing
o cancels the auto-send setting.
･
In case a message indicating that sending to the
broadcast addresses has failed appears as the cause
of the error, you can display the broadcast address by
pressing o. Pressing o cancels the auto-send
setting.
The auto-send setting for auto-send mail/failure mail is
●
also canceled in the following cases:
･
When the mail is moved to the folder for the Message
i-
ppli
α
･
When exchanging the UIM
Auto-send
flashes while
disappears after
flashes.
z
p
z
Advertisement
Chapters
