Advertisement
m8993
1
2
Perform the following operations
Item
Operation procedure
1
z
Activate
Select Yes
2
z
Deactivate
Select Yes
3
z
Check setting
Select Yes
Using Multi Number
Up to 2 additional numbers (Additional No1 and
Additional No2) can be used besides Basic
Number.
m8998
1
2
Perform the following operations
Item
Operation procedure
You can set a number for making calls by
Set Multi
Number
switching multi-numbers in this setting.
1
z
1 to 3
2
z
Check setting
Select Yes
Set the phone number subscribed to Multi
Number
Number.
Setting
a 3
z
Select each item to set
Default
Basic
Name:
Number:
Setting is available for each
基本契約番号/
Additional No1/Additional No2 (up to
my phone
20 one-byte or 10 two-byte
number
characters). For Basic Number, the
Additional
name set in Own Number is
No1:
displayed.
付加番号 1 /
Phone number:
Not recorded
Set the subscribed phone number
Additional
in Additional No1/Additional No2.
No2:
Multi number call:
付加番号 2 /
If set to Enable, you can make a call
Not recorded
by selecting the number to be
Multi number
notified to the receiver in Call
call: Disable
Option.
b Press p
Set the ring alert etc. for each
Incoming calls
additional number.
melody setting
a 4
z
1 or 2
Default
OFF
item to set
Individual setting:
Select whether to set the incoming
call setting individually.
･
When OFF is set, the following
items cannot be set.
Ring alert, Show image:
Setting procedure ☛P70
b Press p
Making calls by selecting the number to notify
the other party
When making a call, you can select the number of
which you notify the other party in Call Option.
1
Multi Number
2
z
Select Yes
3
INFORMATION
If you pull out the UIM or replace it by another UIM, the
●
settings for Multi Number saved in FOMA terminal
(name, phone number, etc.) may be deleted. In such a
case, register them again.
On the screen during the call receiving/dialing, the
●
names corresponding to the multi-numbers (Basic
Number/Additional No1/Additional No2) are displayed.
However, if a call is made following the setting of Set
Multi Number, such as a call without specifying the multi-
number in Call Option, the name corresponding to the
multi-number is not displayed.
In the redial data, the names corresponding to the multi
●
numbers notified during the dialing are displayed.
In the received call history, the names corresponding to
●
the received multi-numbers are displayed.
When making a call from the redial data and received call
●
history, the multi-number corresponding to the name
which was used for the dialed/received call will be used
for the new call if the name is displayed. If not, the multi-
z
Select each
number specified in Set Multi Number will be used.
z
Enter a phone number
To make a call from the redial data: r
･
Highlight a party from the redial data
m5
･
To make a call from the received call history:
l
z
Highlight a party from the received call
z
m5
history
z
Select Multi-No field
to notify the other party
･
･
m
z
Select Yes
m4
z
z
Select the number
When Unspecified is
selected, number set
in Set Multi Number is
used.
When Multi number
call is set to Disable
in Number Setting,
multi-numbers
cannot be selected.
397
Advertisement
Chapters
