Advertisement
Even if other lock functions are set, Omakase Lock can be set.
●
When your FOMA terminal is outside the service area, turned off or during Self Mode, the lock is not set.
●
Omakase Lock is not set when you are subscribing to Dual Network Service and using the mova service.
●
Omakase Lock is a service which locks FOMA terminal by the offer of the FOMA card subscriber. The lock is set when
●
an offer is made by the subscriber even if the subscriber is not the user of FOMA terminal.
Canceling the lock is available only when the same UIM as the time of setting the lock is inserted. When the lock cannot
●
be canceled, contact "General Inquiries" on the back of this manual.
Preventing making/receiving calls
Disables all functions that require communications such as making or receiving calls/PushTalk calls,
communication in i-mode or sending/receiving mails. Infrared communication, infrared remote control
and data transfer by USB connection are also disabled.
Default OFF
c (for over a second)
1
Self Mode is set and
When you use shortcut operations: 1
･
Canceling: c (for over a second)
■
When you use shortcut operations: 2
･
INFORMATION
Note that if emergency calls (110, 119 or 118) are dialed in Self Mode, Self Mode is canceled.
●
If you receive a call when Self Mode is on, a guidance is played for the caller that radio waves are hard to reach or the
●
power of your terminal is turned off. You can use Voice Mail Service and Call Forwarding Service.
The PushTalk call received in Self Mode is rejected, and the other party is notified of Disconnected.
●
i-mode Mail or Message R/F sent during Self Mode are stored at the i-mode Center and SMS are stored at the SMS
●
Center. When you receive messages, cancel Self Mode and perform Check i-mode Message or Check SMS.
Preventing display of the phonebook or schedule
PIM Lock prevents the display of and tampering with private information:
･
This function cannot be set when Reject Non-Reg. Caller is set to ON.
･
When this function is set to ON, the previous redial data and received call history are deleted. Note that
outgoing and incoming calls after the setting is made are recorded and dialing from the redial data or
received call history can be performed.
Default OFF
m8312
1
2
Enter the terminal security code
PIM Lock is set and
･
To cancel the setting: Enter the terminal security code
When PIM Lock is on
･
The following operations and all or some settings become unavailable.
・
Mail/Chat Mail/SMS/Message R/F
・
Full Browser
Note: The miniSD memory card is not included in the bundle and needs to be purchased. ☛P331
160
z
Select Yes
is indicated on the standby display.
z
Select Yes
z
Select Yes
z
z
Press 1
is indicated on the standby display.
*1
・
i-
ppli
α
Select Yes
z
2
・
i-mode
・
Phonebook/PushTalk phonebook
Menu 869
Self Mode
PIM Lock
・
Check i-mode Message
Advertisement
Chapters
