Advertisement
Setting Chaku-moji
You can have a message (Chaku-moji) displayed on the incoming screen of the other party's terminal
for outgoing voice/videophone calls, letting him/her know what the matter is in advance. Also, whether to
display Chaku-moji for incoming calls with Chaku-moji can be set.
Chaku-moji is displayed on the incoming screen of the other party's
terminal. When the call is answered, the Chaku-moji is cleared.
Editing and setting for Chaku-moji messages
Creating a Chaku-moji message
･
Up to 10 messages can be registered.
m8941
1
2
Select <New message>
3
Enter a Chaku-moji message (up to 10 one-byte or two-byte characters)
･
Kanji, hiragana, katakana, alphabetic and numeric characters, symbols, and pictograms can be entered.
Press p
4
･
When you have edited a registered Chaku-moji message, a confirmation screen appears asking whether
to register it. Select Yes to overwrite.
54
･
Supporting models: 902iS series
･
Senders are charged, but receivers are not charged.
･
Received Chaku-moji is registered in the received call history.
■
Using the sent message history:
a m1
b Select a Chaku-moji message
■
Deleting:
a Highlight a Chaku-moji message
To delete all: m3
･
b Select Yes
z
m2
Chaku-moji
Advertisement
Chapters
