Advertisement
Setting the response hold guidance
You can record your own voice as response hold guidance.
･
One guidance of up to about 10 seconds long can be recorded.
･
While a voice or videophone call is during Response and Hold, the guidance set by this function is played.
Default Standard
Example
Setting a recorded guidance
m81161
1
2
Select On-hold tone field
To reset to the default guidance: 1
･
3
Select Record in Edit message field
(beep)
Indication of the allowable
recording time
Press p
4
INFORMATION
If you delete the recorded guidance, the default guidance is restored.
●
If Standard is set, the guidance "I cannot answer the phone right now. Please wait or call back later (in Japanese)" is
●
played for the other party during Response and Hold.
Setting the on-hold tone
･
While a voice or videophone call is during On-hold, the melody set by this function is played.
Default 保留音・ボイス(On-hold tone, voice)
m81162
1
Press 2 or 3
2
To reset to the default melody: 1
･
･
To play a melody: Highlight a melody
INFORMATION
The volume of the on-hold tone cannot be changed.
●
The 3D sound compatible melody set as on-hold tone may be heard deteriorated to the other party.
●
72
z
2
z
Go to Step 4
z
Speak a response hold guidance after a tone
Recording will start after a message is displayed.
･
An end tone (beep) sounds in about 10 seconds
from the start of recording.
To stop the recording: o
･
･
To check the recorded guidance: Select Play
･
Record cannot be selected when a recorded
guidance has already been registered. Select
Delete, select Yes and record after deleting the
recorded guidance.
z
p
Status Message
On-hold Tone
Advertisement
Chapters
