Foma SO903iTV Manual

Table of Contents

Quick Links

Download this manual

Manual for

Easy Search/Contents/

Precautions

Before Using the

Handset

'07.6

Voice/

Videophone Calls

PushTalk

Phonebook

Sound/Display/

Light Settings

Security Settings

Camera

i-mode/i-motion/

i-Channel

Mail

i-αppli

Osaifu-Keitai/

ToruCa

Watching TV

Data Display/Edit/

Management

Music Playback

Other Convenient Functions

Character Entry

Network Services

Data Communication

Appendix/External Devices/

Troubleshooting

Index/

Quick Manual

Table of Contents

Chapters

Table of Contents

Summary of Contents for Foma SO903iTV

Page 1 Manual for Easy Search/Contents/ Precautions Before Using the Handset ’07.6 Voice/ Videophone Calls PushTalk Phonebook Sound/Display/ Light Settings Security Settings Camera i-mode/i-motion/ i-Channel Mail i-αppli Osaifu-Keitai/ ToruCa Watching TV Data Display/Edit/ Management Music Playback Other Convenient Functions Character Entry Network Services Data Communication Appendix/External Devices/ Troubleshooting...
Page 2 ● Because a FOMA terminal operates using radio frequencies, it cannot be used inside a tunnel, underground, in a building or other locations where radio waves do not reach the FOMA terminal, in locations with weak radio wave condition, or outside of the FOMA’s service area. The FOMA services may not be available on high upper floors of high-rise apartments or buildings, even if you can see no obstructions around you.
Page 3: Before Using The Foma Terminal To The First-Time Users Of The Foma Terminal Information On Using The Manual And How To Look Up In The Manual
● Please note that “FOMA SO903iTV” is called the “FOMA terminal” in this “Manual for FOMA SO903iTV”. ● This manual describes the functions that can be performed using the microSD memory card. To use these functions, you need the optional microSD memory card.
Page 4: Before Using Data Communication
Selecting the Menu ..........................32 PushTalk Using the UIM ............................. 34 Attaching and Removing the Battery Pack ..................36 Charging the FOMA Terminal ......................37 Phonebook Checking the Battery Level ..................<Battery level> <Batt <Power on/off>...
Page 5 ■ Typical layout of the operating instructions page Function name The settings at the time of Notifying the Recipient of Your Phone Number Section title <Notify caller ID> purchase Default Not notify When placing a call, your phone number can be shown in the display of the recipient’s An outline and objectives of phone you are calling.
Page 6: Easy Search
Easy Search You can search the function that you want to know with simple words. Useful Functions for a Call your phone number Sending or keeping it anonymous ..Notify caller ID (P.42) Switching to videophone during a voice call ....Chg. to videophone (P.50) on hold Putting a current call ...........Holding (P.64)
Page 7 ..............Select save to (P.147) Displaying image a recorded ........My picture (P.224) For Secure Operations of the FOMA Terminal Locking the FOMA terminal from a remote location in case you misplace it ..........Omakase Lock※ (P.123) secret Displaying saved contents ........Secret display (P.127) Rejecting a call if no caller’s phone number is...
Page 8: Table Of Contents
Supplied and Optional Accessories ........22 Before Using the Handset Part names and functions, Style, Use display, Sub-display, Select menu, UIM, Attach and remove battery pack, Charge the FOMA terminal, Battery level, Power on/off, Initial setting, Date/time, Notify caller ID, Own number Voice/Videophone Calls...
Page 9: Functions
Mail What is i-mode mail?, Mail menu, Compose and send mail, Compose and send Deco-mail, Template, File attachment, Save mail, Receive option, Check new messages, Received/sent/saved mail, Mail setting, Compose and send SMS, and so on... i- α ppli What is i-αppli?, Download, Run i-αppli, Auto start, i-αppli stand-by, Manage i-αppli, and so on... Osaifu-Keitai/ToruCa What is Osaifu-Keitai?, Start an Osaifu-Keitai-compatible i-αppli, What is ToruCa?, Obtain a ToruCa card, Display ToruCa, Manage ToruCa cards, ToruCa setting, IC act.
Page 10: Main Functions Of The Foma So903Itv
Main Functions of the FOMA SO903iTV “FOMA” is the name of NTT DoCoMo’s mobile service based on the W-CDMA (Wideband Code Division Multiple Access) system, which has been approved as a global standard of third generation (3G) wireless communication systems (IMT-2000 or International Mobile Telecommunications-2000).
Page 11 You can exchange data with other FOMA terminals using the infrared communication You can use voice call and packet communication function. You can also use the FOMA terminal to simultaneously. You can receive i-mode mail even operate equipment such as a TV that is provided when you are in a call and you can also make a with infrared remote control (P.245, 248).
Page 12: Making Full Use Of So903Itv
Making Full Use of SO903iTV ! Videophone Chaku-moji You can have a face-to-face conversation You can send a message that is displayed with a person in the distance. You can hear in the recipient’s Incoming call display while the person’s voice from the speaker without calling the recipient.
Page 13: Playing Music
Osaifu-Keitai/ToruCa  Once you download the Osaifu-Keitai-compatible i-αppli, you can deposit e-money to IC card inserted in the FOMA terminal or look up Beep the balance or purchase history. Furthermore, the i-αppli for “DCMX” credit service provided by DoCoMo is preinstalled, making your mobile phone an increasingly handy tool in real life by providing a feature known as “Osaifu-Keitai”.
Page 14: Safety Precautions (Observe Strictly)
Handling the FOMA Terminal, Battery Pack, Adapter (including the charger), and UIM ..12 Handling the FOMA Terminal ............ 14 For safe and proper use of the FOMA terminal, please Handling the Battery Pack............15 read the “Safety Precautions” prior to use. Keep the Handling the Adapter (including the charger) ......
Page 15 If you continue using i-αppli, talking on the videophone, or watching One Seg Do not use the FOMA terminal in a place for a long period of time with the battery where a fire or explosion could occur such being charged, the temperature of the as gas stations.
Page 16 Power off the FOMA terminal in a place Handling the FOMA Terminal where the use is prohibited such as in airplane or hospital. WARNING Failure to do so may affect electronic equipment and electronic medical Do not use the FOMA terminal while equipment.
Page 17 The FOMA terminal may hit you or others Don’t FOMA terminal when driving for safety or the strap gets cut away from the FOMA reasons. terminal. It may cause accident such as injury or damage to the FOMA terminal or The use of the FOMA ter minal may other property.
Page 18 Do not forcibly attach the battery pack instructions of the local authorities in to the FOMA terminal. Also, make sure charge of collecting used battery packs. to attach the battery pack in the correct Don’t...
Page 19 Handling the FOMA Terminal Near as a metal strap and insert it firmly. Electronic Medical Equipment Failure to do so may cause electric shock, short circuit, or fire.
Page 20: Handling Precautions
 Do not put the FOMA terminal in a bag full of items or sit cardiac pacemaker or implantable down with the FOMA terminal in your hip pocket. This may cardioverter defibrillator.
Page 21 FOMA terminal. ● Do not charge in the following places. ● Do not sit down with the FOMA terminal in the hip  Places that are very humid, dusty or exposed to strong pocket of your trousers or skirt.
Page 22: Intellectual Property Right
HI Corporation.  “BRAVIA” is a registered trademark of Sony Corporation. ● The FeliCa reader/writer function of the FOMA  “みんなのGOLF” is a registered trademark of Sony Computer terminal uses extremely weak radio waves, so that Entertainment Inc.
Page 23 ◆ Others ◆ Windows Title Conventions  This product contains Flash ® Lite™ of Adobe Systems  Windows 2000 is an abbreviation of the Microsoft ® Windows ® Incorporated. 2000 Professional operating system. Adobe, Flash, and Flash Lite are trademarks or registered ...
Page 24: Supplied And Optional Accessories
You cannot use the Stereo Earphone Set (free sample product) to talk on the FOMA terminal. Disconnect the Stereo Earphone Set (free sample product) from the FOMA terminal or set the Earphone mic to [Valid main] and talk using the FOMA terminal microphone (P.275).
Page 25 About the Sub-display ......................31 Selecting the Menu ......................32 Using the UIM ........................34 Attaching and Removing the Battery Pack ................36 Charging the FOMA Terminal ....................37 Checking the Battery Level ................<Battery level> Powering On/Off ....................<Power on/off>...
Page 26: Part Names And Functions
Part Names and Functions                                     ...
Page 27 (P.138). (P.168) and press for over a second to display My Selection (P.270). Press while the FOMA terminal is folded to switch the display on Press to select an item in the guide display (P.31). the sub-display (P.31).
Page 28 FOMA terminal. Disconnect the Stereo Earphone Set (free sample product) from the FOMA terminal or set the Earphone mic to [Valid main] and talk using the FOMA terminal microphone (P.275). Four-way Keys and Enter Key...
Page 29: About The Style
About the Style You can use the FOMA terminal in the Normal style and TV style in which the terminal is placed horizontally. Normal style TV style When you watch One Seg in the TV style, you can place the FOMA terminal on the...
Page 30: Using The Displays
Using the Displays  For details on the icons in the Camera mode or while watching One Seg, see P.137 or P.210 respectively. Main display Sub-display ∼      ∼ ∼ Clock (P.41) Clock (P.41) Ｍｉｓｓｅｄｃａｌｌ１ Notification display (P.30) → 最高３０℃ １０...
Page 31 While data in the MUSIC Player is being updated ● The FOMA terminal’s display is manufactured based on the leading edge technologies, and some pixels unlit or lit may appear constantly in the display. This is not a malfunction. Before Using the Handset...
Page 32 (P.284). Timer Rec rslt X Timer recording is completed (P.215). USB cable cncted The FOMA USB Cable (optional), etc. is being connected (P.238). PB update failed The Phonebook auto-update at the Data Security Service Center has failed (P.99). Stand-by SW error i-αppli stand-by display security error has occurred (P.196).
Page 33: About The Sub-Display
Guide Display To utilize the FOMA terminal’s functions when using the Normal style, use the four-way keys (Up/Down/Left/Right arrow keys), the enter key, the Mail key, the i-mode/i-αppli key, the MENU key, and the i-Channel/My Selection key according to the instructions shown in the guide display.
Page 34: Selecting The Menu
Selecting the Menu Default Menu guide display (Normal mode): OFF, Menu guide display (Simple mode): ON The FOMA terminal provides various functions. Press (MENU) to display the menu display. You can switch the menu display between [Normal] and [Simple] as well as change menu icons to be displayed in the Normal mode.
Page 35: List Of Menus (P
Selecting a Function from the Menu Display A function can be executed easily by going through the menus. Press (MENU). The menu display appears. to select a menu and press The function associated to the menu is selected. ● You can execute a function in the menu display by pressing a key on the keypad. For the functions that can be executed using a number key, see the list of menus (P.294).
Page 36: Using The Uim
Make sure to keep a removed UIM safely. About the UIM Security Code You can set two Security codes, namely “PIN1” and “PIN2”, for the UIM (FOMA card). These codes are set to “0000” at the time of subscription. You can change them to any 4- to 8-digit number you want (P.121).
Page 37  When you replace the UIM with another one or if you do not have a UIM inserted in the FOMA terminal, you are unable to display or play back the data or files for which the UIM operation restriction function is set or if they are sent using the infrared or iC communication or attached to mail.
Page 38: Attaching And Removing The Battery Pack
WORLD WING service halfway, you need to make an application to use WORLD WING. ※ If you subscribed to the FOMA services before August 31, 2005 and did not make an application to “WORLD WING”, you need to make a separate application.
Page 39: Charging The Foma Terminal
100 V to AC 240 V.  Although the FOMA AC Adapter 01 for Global use is compatible with AC 100 V to AC 240 V, the shape of its power plug is only for use with AC 100 V (domestic specification).
Page 40 How to Charge the FOMA Terminal Charge the battery pack using the optional Desktop Holder SO06 with the FOMA AC Adapter 01/02 connected. Make sure to see the user’s manuals of the Desktop Holder and AC Adapter.
Page 41: Checking The Battery Level
When not using the AC adapter for a long period of time, remove its power plug from the AC outlet. ● Make sure that the phone strap, etc. does not get caught in between the FOMA terminal and the desktop holder. ●...
Page 42: Powering On/Off
Powering On/Off <Power on/off>  When you power on the FOMA terminal, the screen for confirming whether to execute the software update may appear (P.325). Press (PWR) for over two seconds. The FOMA terminal is powered on, the display and the keypad lights are turned on, and an animation is displayed.
Page 43: Setting The Date And Time
The date and time settings are retained even when you replace the battery pack. However, if you leave the FOMA terminal without a battery pack or with a fully expended battery pack for a long period of time, the date and time may be reset to “----/--/-- --- --:--”. In this case, set the date and time once again.
Page 44: Notifying The Recipient Of Your Phone Number
Notifying the Recipient of Your Phone Number <Notify caller ID> Default Not notify When placing a call, your phone number can be shown in the display of the recipient’s phone you are calling.  The caller ID is important personal information. Carefully decide whether you notify a recipient of your caller ID. From the Menu, select [NW Services] →...
Page 45 Press (Edit) in the Own number display. Ｅｄｉｔｍｙｄａｔａ０９０ＸＸＸＸＸＸＸＸ Save each item. Icon Settings Enter your mail address within 50 half-width alphanumeric characters and symbols. Enter your name within 16 full-width or 32 half-width characters. When entering your name, the reading is automatically entered. ...
Page 47 Receiving a Call by Switching to/from Voice/Videophone Call ..........62 Pressing a Key on the Keypad to Receive a Call ........<Any key answer> Setting the Operation for the FOMA Terminal Being Folded during a Call ... <Setting when folded> Using the Low Voice Feature .................
Page 48 ※2 DoCoMo’s videophone complies with “3G-324M standardized by 3GPP for global standard”. The FOMA terminal cannot be connected to a videophone that uses a different system. ※1 3G-324M Global standard for third-generation mobile videophones. ※2 3GPP (3rd Generation Partnership Project) Local standardization committee set up for development of common technology specifications related to third-generation mobile wireless communication systems (IMT-2000).
Page 49 Placing a Voice/Videophone Call Check the radio wave condition and enter a phone number. Example: Placing a voice call Enter a phone number in the stand-by display.  You can enter a phone number of up to 80 digits.  Make sure to include the area code, even for a local call. When you press the wrong number Press to delete the entered digits one by one from the right.
Page 50: Network Service
When you place a videophone call to a terminal that is not equipped with a videophone function, or when a recipient is outside of the service area or the phone is powered off (even if the FOMA terminal has the videophone function), your call is not connected.
Page 51  When you finish the call, the hands-free operation is automatically canceled. ● Talk into the FOMA terminal from a distance of 30 cm or less. Entering a Pause, Timer, or + You can include a pause, timer, or + in a phone number (within 80 digits in all) to place a call.
Page 52 When the call is switched to the videophone call, your image is sent to the recipient and the call is switched to the hands-free operation that allows you to hear the recipient’s voice from the speaker. ● If packet communication is in progress, it is disconnected and the FOMA terminal is switched to videophone. ●...
Page 53 Using the Redial/Received Record <Redial record/Received record> Up to 30 previously placed/received calls are saved as call records with their dates/ times, phone numbers, and names. The phone numbers or names appear in descending order from the most recent call. For a PushTalk call, the group name or the first member’s name appears.
Page 54 To send mail You can send mail to a person whose phone number and mail address are saved in the Phonebook. Move the cursor to a call record and from the Function menu, select [Reply by mail] → a mail address. Compose mail and send it. To save in a group of the PushTalk phonebook When you perform PushTalk communication among several persons saved in the PushTalk phonebook, move the cursor to a received record of the PushTalk call (...
Page 55: Nw Services
Deleting the Redial/Received Record The call records are retained even if the FOMA terminal is powered off. If you do not wish others to know the previously dialed records, delete one or all of the call records.  If you delete either a redial record or a dial frequency record, both records are deleted.
Page 56 Setting the Display for Chaku-moji Being Received Default Only calls w/ID You can set the display style to be used when you receive a Chaku-moji message. From the Menu, select [NW Services] → [Chaku-moji] → [Set Message display] and press [Display all Msgs] : Receive and display all Chaku-moji.
Page 57 ● When a Chaku-moji is received by the recipient, “ ” appears in the sender’s terminal display and charge is required. ● If the recipient does not receive the Chaku-moji, “ ” appears. In this case, there is no charge. (For example, when the recipient’s terminal does not have Chaku-moji support or if the Chaku-moji was received in a condition other than that set using the Set Message display menu.) ●...
Page 58 Example: Placing a voice call Enter a phone number in the stand-by display and press (Call). [Voice call] : Select a call condition for a voice call. [Videophone] : Select an image to be sent (My side/Substitute image/Select sub image) and the communication speed (64K/32K) to be used when you place a videophone call.
Page 59 ※ See the NTT DoCoMo’s website for information about countries to which a videophone call can be connected and telecommunication companies. ※ A recipient’s image displayed on the FOMA terminal may be fuzzy or a call may not be connected successfully depending on the terminal to which the international videophone is connected.
Page 60 From the Menu, select [NW Services] → [Int’l dial assist] and press [Auto conversion] : Set whether an international access number is automatically Ｉｎｔ’ｌｄｉａｌａｓｓｉｓｔ added. ＡｕｔｏｃｏｎｖｅｒｓｉｏｎＯＮ [Int’l prefix] : Save an international access number and set the Auto assist Ｉｎｔ’ｌｐｒｅｆｉｘ...
Page 61 Placing a Call by Specifying a Sub-address <Sub-address> Default You can set to place a call to a specific phone or communication device by specifying a sub-address.  The sub-address is also used when you select a content in V-Live. From the Menu, select [Settings] →...
Page 62 When a setting is made for hearing sound from the hands-free device, a ring tone sounds from the hands- free device even if the FOMA terminal is set to the Manner mode or its Ring volume is set to [OFF].
Page 63 You can preset the hands-free function of a videophone call to [OFF] (P.73). ● You may hear beeps (ring tone during a call) while talking on the FOMA terminal. If [Answer] is set for the Arrival Call Act with the Voice Mail Service, the Call Forwarding Service, or the Call...
Page 64 Receiving a Call by Switching to/from Voice/Videophone Call A caller can switch between voice and videophone calls during a call. When the caller switches the voice call to the videophone call, a recipient can select whether to send a camera image. ...
Page 65 When the Flat-plug Earphone/Microphone with Switch (optional) is connected, the Setting when folded is disabled and the call continues even if you fold the FOMA terminal. If it is during a videophone call that you fold the FOMA terminal, a substitute image is sent.
Page 66: Putting A Call On Hold
Putting a Call on Hold during a Call <Holding> The call can be put on hold during a voice or videophone call so that your voice cannot be heard by the recipient.  Even if the call is put on hold, the caller is charged for the call. Press (Func) during a call, select [Holding], and press Both you and the recipient hear the melody “Hamabe no uta”.
Page 67 - Booking alarm ■ Operation for an incoming call when network services and the Public mode (Drive mode) are set FOMA terminal’s operations for an incoming call while the Public mode is set depend on what network services are used, as follows.
Page 68 ■ When the Public mode (Power off) is set  If there is an incoming call when the FOMA terminal is powered off or you are outside of the service area or in a location without the radio wave, the guidance for the Public mode (Power off) is played back to inform the caller that you are unable to answer the call because you are in a place where it is required to power off a mobile phone, and then the call is disconnected.
Page 69  The FOMA terminal can record up to three record messages and videophone messages, each for up to about 15 seconds. If three record messages have been recorded, the Record message does not function. Similarly, when three videophone messages have been recorded, the Videophone message does not function.
Page 70 When Receiving a Call The answering message is played back to the caller after the ring tone Ｐｌａｙａｎｓｗｅｒｍｅｓｓａｇｅドコモ一郎 sounds for the set duration. To talk to the caller Press When you receive a videophone call The answering message is played back and the answering image is displayed to the caller.
Page 71 Record message is [OFF].  If three record messages are recorded when the FOMA terminal receives a voice call, the Quick record message function cannot be operated. Similarly, if three videophone messages are recorded when it receives a videophone call, the Quick record message function cannot be operated.
Page 72 Playing Back/Deleting a Record Message/Videophone Message/Voice Memo You can play back or delete a recorded record message/videophone message and voice memo (P.271). Playing Back a Record Message/Videophone Message/Voice Memo Example: Playing back a record message Press in the stand-by display, select [Play rec msg], and press To play back a videophone message Ｐｌａｙｒｅｃｏｒｄｍｅｓｓａｇｅ...
Page 73 Using Chara-den When you place a videophone call, you can send a character instead of a camera image. You can press keys on the keypad to move a character or some character’s mouth to correspond to the voice on the microphone. ...
Page 74 Setting the Videophone Operation <Videophone setting> Setting the Display to Be Used in a Videophone Call Default Main-Other side You can set the image to be displayed on the videophone images (Large) and (Small) during a videophone call. From the Menu, select [Settings] → [Call] → [Videophone] → [Display setting] and press [Main-Other side] : Display the recipient’s/caller’s image on the videophone image (Large) and your image on the videophone image (Small).
Page 75 [OFF] : You hear the recipient’s/caller’s voice from the earpiece during a videophone call. Select [ON]/[OFF] and press The Hands-free is set. ● When the Flat-plug Earphone/Microphone with Switch (optional) is connected to the FOMA terminal, you hear a recipient’s voice from the Earphone/Microphone, regardless of the Hands-free setting. Voice/Videophone Calls Continued...
Page 76 Setting Notice for Switching between Voice and Videophone Calls <Videophone switch notice> You can set whether to notify the recipient/caller that the FOMA terminal is capable of switching between voice and videophone calls.  You cannot perform this setting when you are outside of the service area or in a place where radio waves do not reach, or during a voice or videophone call.
Page 77 PushTalk What is PushTalk? ........................ 76 Originating a PushTalk Call ....................78 Adding a Member during PushTalk Communication ............79 Receiving a PushTalk Call ....................79 Saving Data in the PushTalk Phonebook ................80 Originating a PushTalk Call Using the PushTalk Phonebook ..........82 Deleting a PushTalk Phonebook Entry .................
Page 78: What Is Pushtalk
What is PushTalk? You can communicate among several persons (up to five persons including yourself) with a simple operation of pressing to display the PushTalk phonebook, selecting recipients, and pressing . Every time you press (speak), you are charged for PushTalk communication.
Page 79 Using the Display during PushTalk Communication  Main display : During PushTalk communication   : Hands-free ON  Active speaker The phone number (or the member name when the speaker is saved in  ＯｎＰｕｓｈＴａｌｋ the Phonebook) appears  ドコモ一郎...
Page 80: Originating A Pushtalk Call
Originating a PushTalk Call  You cannot originate a PushTalk call during a voice call, a videophone call, or data communication.  If you originate a PushTalk call during i-mode communication, the i-mode communication is terminated. Originating a PushTalk call while running i-αppli also stops the i-αppli. Enter a phone number in the stand-by display.
Page 81: Adding A Member During Pushtalk Communication
The screen for selecting the method of adding a member appears. [View PushTalk PB] : Select a member from the PushTalk phonebook. [View phonebook] : Select a member from the FOMA terminal phonebook. [Direct input] : Enter a phone number directly.
Page 82: Saving Data In The Pushtalk Phonebook
: Save new data in the FOMA terminal phonebook and then save it in the PushTalk phonebook.  Follow the same steps as in “Add to FOMA terminal phonebook” (P.89, step 3 to 4). Select [View phonebook] and press The FOMA terminal phonebook appears.
Page 83 ０３ＸＸＸＸＸＸＸＸ ● When you save a person saved as Secret in the FOMA terminal phonebook in the PushTalk phonebook, the entry is not displayed in the PushTalk phonebook. To display the name, set the Secret display to [ON]. Setting a Group You can originate a PushTalk call to several recipients by saving them in a group as members beforehand.
Page 84: Originating A Pushtalk Call Using The Pushtalk Phonebook
Originating a PushTalk Call Using the PushTalk Phonebook If you save persons as members in the PushTalk phonebook, you can originate a PushTalk call to several persons. Press in the stand-by display, select a member, and press “ ” appears for the selected member. Ｍｅｍｂｅｒ...
Page 85: Deleting A Pushtalk Phonebook Entry
Select a member and press (Func). The Function menu appears. Select [Delete] → [Delete one] → [Yes] and press The screen for confirming whether to delete the corresponding entry from the FOMA terminal phonebook appears. Select [Yes]/[No] and press The selected member is deleted.
Page 86: Using The Pushtalk Phonebook
Using the PushTalk Phonebook <PushTalkPlus> You can connect to the network and use the PushTalkPlus service (P.76).  To use the PushTalkPlus service, you must subscribe to this service. Press in the stand-by display and press (Func). The Function menu appears. Select [NW connection] →...
Page 87 From the Menu, select [Settings] → [Application] → [PushTalk] → [Caller ID] and press [ON] : When you originate a PushTalk call or add members during PushTalk communication, the phone numbers of the caller (yourself) and all the other members are displayed in the incoming call and On PushTalk displays of all the members’...
Page 88 When the Flat-plug Earphone/Microphone with Switch (optional) is connected to the FOMA terminal, you hear a member’s voice from the Earphone/Microphone, regardless of the Hands-free setting. ● When the FOMA terminal is folded or used in the TV style, the hands-free call is performed regardless of the Hands-free setting. ●...
Page 89 Phonebook Phonebooks the FOMA Terminal Can Use ................88 <Add to FOMA terminal phonebook> Saving an Entry in the FOMA Terminal Phonebook ..<Add to UIM phonebook> Saving an Entry in the UIM Phonebook ........... Saving the Redial/Received Record in the Phonebook ............92 Saving a Group .....................
Page 90 Secret or a group that includes a person saved as Secret, set the Secret display to [ON]. ● The saved data may be lost as a result of malfunction, repair, or other handling of the FOMA terminal. Under no condition will DoCoMo be held liable for any damaged or lost data saved in the Phonebook, etc.
Page 91 Saving an Entry in the FOMA Terminal Phonebook <Add to FOMA terminal phonebook> Up to 1,000 entries can be saved in the FOMA terminal phonebook. Press ) in the stand-by display and press (Create). Select [Main memory] and press To save an entry in the UIM phonebook Ｅｄｉｔｐｈｏｎｅｂｏｏｋ...
Page 92  To display the entry saved as Secret, set the Secret display to [ON]. Press (Complete). The entered data is saved in the FOMA terminal phonebook. ● If you set [None] for the Des call display, Des phone/mail tone, or Select phone/mail Illum., then the call image, ring tone, and indicator color saved for the Group setting are automatically used for the respective function.
Page 93 @ mark. Press (Complete). The entered data is saved in the UIM phonebook. ● Data copied from the FOMA terminal phonebook or received using a function such as the infrared or iC communication may not be saved correctly. Phonebook...
Page 94 The Edit phonebook display appears. To save to the UIM phonebook Select [UIM]. Save other items.  Follow the same steps as in “Add to FOMA terminal phonebook” (P.89, step 3) or in “Add to UIM phonebook” (P.91, step 3). Press (Complete).
Page 95 Saving a Group <Group setting> Up to 20 groups can be saved in the FOMA terminal phonebook, and up to 10 groups can be saved in the UIM (FOMA card) phonebook.  You cannot change [ No Group] in the UIM phonebook.
Page 96 To display the UIM phonebook あかさたなはまやドコモ一郎 Press (UIM). Every time you press the key, the display switches ドコモ三郎 between the FOMA terminal and UIM phonebooks. “ ” appears in ドコモ二郎 the UIM phonebook. ドコモ太郎 To switch the display format temporarily From the Function menu, select [Chg.
Page 97: Searching The Phonebook
Searching the Phonebook <Search phonebook> The Phonebook can be searched to display up to 100 entries temporarily. Press (Func) in the Phonebook. The Function menu appears. Select [Search] and press [Name] : Enter part of a reading within 32 half-width characters. For the UIM Ｓｅａｒｃｈｐｈｏｎｅｂｏｏｋ...
Page 98: Editing A Phonebook Entry
Press (Edit). The Edit phonebook display appears. Edit each item.  Follow the same steps as in “Add to FOMA terminal phonebook” (P.89, step 3) or in “Add to UIM phonebook” (P.91, step 3). Press (Complete). The edited data is saved in the Phonebook.
Page 99 Storing (Restoring/Updating) the Phonebook at the Data Security Service Center You can use the Data Security Service to store the FOMA terminal phonebook at the Data Security Service Center.  For details about updating the Phonebook, see P.99. Press (Func) in the Phonebook.
Page 100 Checking the Number of Entries Saved <Memory status> You can check the number of entries saved in the FOMA terminal phonebook and UIM (FOMA card) phonebook and the number of locations still available or entries saved as Secret. Press (Func) in the Phonebook.
Page 101 Using the Data Security Service <Data Security Service> You can use the Data Security Service to store the FOMA terminal phonebook at the Data Security Service Center. You can update or restore the stored Phonebook by connecting to the Data Security Service Center.
Page 102 Displaying the Communication History You can save up to 30 history records of communication with the Data Security Service Center.  When the number of communication history records exceeds 30, the records with the oldest date/time are overwritten, in that order. From the Menu, select [LifeKit] →...
Page 103 Light Settings Setting the Ring Tone/Image/Indicator Color for Incoming Call and Mail ..<Incoming set> ■ Setting the Ringer Setting the Sounds of the FOMA Terminal ..........<Set basic tone> Adjusting the Volume of Caller’s Voice ..............<Volume> Adjusting the Volume While Playing Flash Movie ..........
Page 104: Setting The Ring Tone/Image/Indicator Color For Incoming Call And Mail
Setting the Ring Tone/Image/Indicator Color for Incoming Call and Mail <Incoming set> Default Ring tone: 着信音1, Link incoming call: OFF (Videophone), Link receive mail: ON (MessageR・MessageF), Ring volume: 3, Incoming image/Receiving img: 音声発着信中(voice call)/テレビ電話発着信中(videophone call)/ パケット通信(mail・MessageR・MessageF), Vibrator: OFF, Color: C9:Color9, Ring time: 4 sec (mail・MessageR・MessageF) You can set a ring tone, ring volume, incoming image, vibration pattern, and incoming indicator color for each type of incoming transmission (voice, videophone, or PushTalk...
Page 105 Set the volume of the ring tone at [Ring volume]. Select from [OFF] and [1 to 5].  For an incoming voice, videophone, or PushTalk call, you can set [Step down] and [Step up]. [Step down] turns down the volume every six seconds and [Step up] turns up the volume every six seconds. To set the ring tone volume to [OFF] Press at level 1.
Page 106: Setting The Sounds Of The Foma Terminal
FOMA terminal about 40 cm (this distance depends on the sense of an individual) away and facing toward you. Note that if the FOMA terminal is moved left or right or the distance between the terminal and you is not suitable, you cannot enjoy the effect. The perception of this 3D effect varies depending on the senses of an individual.
Page 107: Adjusting The Volume Of Caller's Voice
Adjusting the Volume of Caller’s Voice <Volume> Default The volume of caller’s voice during a voice, videophone, or PushTalk call can be adjusted in five levels from level 1 (smallest) to level 5 (largest). From the Menu, select [Settings] → [Call] → [Call setting] → [Volume] and press The Volume display appears.
Page 108: Setting The Poor Signal Quality Alert
You can set the position where the ring tone sounds when the Flat-plug Earphone/ Microphone with Switch (optional) is connected to the FOMA terminal. The other tones, such as the Alarm, Schedule alarm, and Booking alarm tone also sound from the position you set for the ring tone.
Page 109: Muting The Ring Tone
Muting the Ring Tone <Manner mode> All sounds from the FOMA terminal can be disabled to avoid disturbing others by using the Manner mode. There are three types of the Manner mode. Set the mode by using the Manner mode setting (P.108).
Page 110: Changing The Manner Mode Settings
Changing the Manner Mode Settings <Manner mode setting> Default Set: OFF, Mode: Manner The Manner mode can be selected from three types: “Manner”, “Silent”, and “Original manner”. Press in the stand-by display. ＭａｎｎｅｒｍｏｄｅＳｅｔＯＦＦＭｏｄｅＭａｎｎｅｒＯｒｉｇｉｎａｌｍａｎｎｅｒ Select the type of the Manner mode at [Mode]. Press (Complete).
Page 111: Setting The Stand-By Display
Setting the Stand-by Display <Stand-by display> Default Stand-by: Pattern, Ticker: Std Type: LTC/Clock, Font color: Blk, Clock style: 12h, Soft key: ON You can set the image for the stand-by display, the Telop display for i-Channel, Calendar/ Clock display, and whether to show or hide the guide display. From the Menu, select [Settings] →...
Page 112: Setting Images For Placing A Call/Sending Mail
Telop text is automatically restored. ● Even if the Soft key is set to [OFF], you can operate the FOMA terminal normally. ● If you set an i-motion for the stand-by display, the playback starts in the case, such as when you open the...
Page 113: Setting The Display For Incoming And Outgoing Calls
Select an image from My picture of the Data Box at [Calling].  You can set the following files. Calling/V.phone calling img Category File format File size Image size My picture GIF/JPEG Max. 500K bytes Max. [VGA(640×480)] Flash Max. 100K bytes −...
Page 114: Setting The Display For The Sub-Display
Setting the Display for the Sub-display <Sub display> Default Ticker: Std, Power saver: 15 sec You can set the i-Channel Telop text to be displayed in the sub-display. The time before starting the Power saver can be also set for the sub-display. From the Menu, select [Settings] →...
Page 115: Saving Power For The Display
Saving Power for the Display <Power saver> Default 1 min The display is automatically turned off to save battery power when no operations are made for a specific period. You can set the time before turning off the display. From the Menu, select [Settings] → [Display] → [Power saver] and press Select a time before starting the Power saver mode and press Select from [1min], [3min], [5min], [10min], [15min], and [30min].
Page 116: Using The Menu Pattern
Using the Menu Pattern <Menu pattern> Default Main body color “Metal Black”: Dark Black, Main body color “Brilliant Red”: Elegant Red, Main body color “Pure White”: Misty White Using the Menu pattern, you can change the images for the stand-by display, menu icons, and task icons all at once.
Page 117: Informing Missed Call/New Mail With Indicator
Informing Missed Call/New Mail with Indicator <Missed call> Default The incoming indicator can be set to flash about every five seconds to notify you that there is a missed call or unread mail/SMS/message. The indicator is turned off by checking the missed call or displaying mail/SMS/message. From the Menu, select [Settings] →...
Page 118: Changing The Screen Display To English
Changing the Screen Display to English <Language> Default Japanese Menus, messages, and other displays can be displayed in either Japanese or English. From the Menu, select [設定] → [管理] → [バイリンガル] and press [Japanese] : Set the display language to Japanese. ハ゛イリンカ゛ル...
Page 119: Caller Id
Security Settings ■ About Security Codes Security Codes Used on the FOMA Terminal ..............118 Changing the Security Code ............... <Change code> Setting the PIN Code ..................<UIM setting> Canceling the PIN Lock ....................... 121 ■ Restricting Operations and Functions Available on the Mobile Phone Various Locking Functions ....................
Page 120: Security Code
Security Codes Used on the FOMA Terminal Some functions provided for convenient use of the FOMA terminal require the security code to use them. Besides the Security code for operating the mobile phone, the network security code necessary for the network services, i-mode password, etc. are available.
Page 121: Puk Code
 If you continue to use the current UIM with a newly purchased FOMA terminal, use the previous PIN1 and PIN2 codes you set for the UIM.
Page 122: Changing The Security Code
[ON] : You need to enter the PIN1 code when the FOMA terminal is powered on. [OFF] : Do not need to enter the PIN1 code when the FOMA terminal is powered on. Enter a PIN1 code and press (OK).
Page 123 Changing the PIN1 Code/PIN2 Code Default Change PIN1 code・Change PIN2 code: 0000  To change the PIN1 code, set the PIN1 code setting to [ON]. Example: Changing the PIN1 code From the Menu, select [Settings] → [Management] → [UIM setting] and press The Security code screen appears.
Page 124 Description Lock all Prevent others from using the FOMA terminal (P.122). Omakase Lock Lock the FOMA terminal to prevent others from using it. For example, this service is useful when you lose or misplace the FOMA terminal (P.123). Self mode...
Page 125 ● If there is an incoming PushTalk call when the Lock all is set, the FOMA terminal does not receive the call and the caller hears a busy tone. The call is saved in the Received record. When you cancel the Lock all, the notification icon “...
Page 126 Public mode (Drive mode) is set, you cannot receive a voice or videophone call. ● The Omakase Lock cannot be set if the FOMA terminal is outside of the service area, in the Self mode, or powered off. ●...
Page 127 When you set the PIM lock, the i-Channel Telop text is not displayed. ● When you set the PIM lock, the FOMA terminal does not display the notification icons “ ” (New mail), “ ” (Mail at center), “ ” (New ToruCa), “...
Page 128 Restricting Dialing from the Keypad <Key dial lock> Default The keypad is locked to restrict placing a voice or videophone call or originating a PushTalk call. To cancel the Key dial lock temporarily, enter the Security code.  When you set the Key dial lock, you cannot perform the following functions. - Place a call using the keys on the keypad (excluding calls made by the 2-touch dial or using the Flat-plug Earphone/Microphone with Switch), place a call using the Received record, or [Call back] from i-mode mail - Add a member during PushTalk communication using the keys on the keypad...
Page 129 Own number, and Schedule as Secret if you do not want others to see them.  Even if the Secret display is set to [ON], it is changed to [OFF] when you power off the FOMA terminal. From the Menu, select [Settings] → [Lock/Security] → [Secret display] and press The Security code screen appears.
Page 130 For the Accept/Reject calls, up to 20 phone numbers can be saved (Phone No.). You can also set to accept/reject calls only from specific groups in the FOMA terminal phonebook. For the Accept/Reject calls, up to three groups can be saved (Group list).
Page 131: Rejecting Calls With No Caller Id
Press (Complete). The Accept/Reject call from specified phone numbers is set. Rejecting Calls with No Caller ID <Denied no ID> Default When receiving a voice, videophone, or PushTalk call without the caller’s phone number displayed, the reason for not displaying it is shown. You can decide whether to accept a call based on the reason.
Page 132 <Data Security Service> The Data Security Service is a service that allows you to store the Phonebook, still images, and mail (hereinafter referred to as “stored data”) saved in the FOMA terminal at the Data Security Service Center. Security Settings...
Page 133 Even if you lose the stored data, for example, if you accidentally lost the FOMA terminal or it had a water-related trouble, you can restore the Phonebook and other stored data at the Center into a new FOMA terminal. Furthermore, you can easily edit the stored data at the Data Security Service Center by accessing the My DoCoMo website on your PC, and save the edited stored data in the FOMA terminal.
Page 135 Camera Before Using the Camera ....................134 Recording Still Images ................<Shoot by photo> Recording Movies ..................<Movie shoot> Changing the Camera Settings ..................142 Adjusting the Camera during Recording ................144 Setting the Camera Operation ................... 147 <Bar code reader> Using the Bar Code Reader ..............
Page 136: Before Using The Camera
 The Camera mode may not be activated when the FOMA terminal is charged electrostatically. Notes on Using the Camera  To prevent shaking, hold the FOMA terminal firmly or place it on a stable place and use the Auto timer when recording.
Page 137 About Still Image/Movie Item Still image Movie File format JPEG (Exif format) MP4 (MobileMP4) File name When saved to [Data Box] When saved to [Data Box] YYYYMMDDhhmmss YYYYMMDDhhmmss  The recorded year, month, date, hour, minute,  The recorded year, month, date, hour, minute, second is displayed.
Page 138 About Recording Time of Movie The recording time of movie that can be saved in the Data Box or microSD memory card varies depending on the recorded image quality, Shoot mode, image size, file size restriction settings as well as the recording conditions and object of shooting. ■...
Page 139 Icons in the Camera Mode In the Camera mode display, the following icons appear depending on the settings and functions selected.  You can use (Display) to switch the display of the icons and guide display (Standard, Simple, or Display off). Even if you select “Display off”, related icons are displayed when you perform any operations.
Page 140: Recording Still Images
When you record an object under the following conditions, the Auto focus may not be able to adjust the focus of the object. - The object does not have color contrast. - You are recording while moving the FOMA terminal. - The object is moving. - There is a light within range of the camera view.
Page 141 Recording Still Images in the Continuous Mode You can record four still images continuously at an interval of about 0.2 seconds with a single press of (Shoot) or  The size of the images in the Continuous mode is [QVGA(240×320)]. You cannot change the size of images. ...
Page 142 Recording Images with Frames You can record an image with a frame, which can be selected from the preinstalled frames or downloaded frames.  For Out-camera recording, you can select a frame size of [sQCIF(128×96)], [QCIF(176×144)], [QVGA(240× 320)], [Stand-by(240×432)], and [CIF(352×288)]. For In-camera recording, you can select the frame size of [sQCIF(128×96)], [QCIF(176×144)], and [CIF(352×288)].
Page 143: Recording Movies
Recording Movies <Movie shoot> You can make movie recordings with the built-in camera.  The movie recording time varies depending on where to save a movie (P.136). (Func) in the Camera mode display, select [Shoot] → [Switch mode] → Press [Movie shoot], and press The display switches to the Movie shoot display and “...
Page 144: Changing The Camera Settings
● If you fold the FOMA terminal while you are recording a movie, the recording is stopped and the screen for confirming whether to save the movie appears. When the Auto save is set to [ON], the movie is saved automatically.
Page 145 The Auto timer is set and “ ” appears. ● If there is an incoming call or you fold the FOMA terminal when you are recording with the Auto timer, the recording stops. ● After recording, the Auto timer is automatically reset to [OFF].
Page 146: Adjusting The Camera During Recording
[to vertical] : Record a movie while holding the FOMA terminal in the landscape orientation. [to horizontal] : Record a movie while holding the FOMA terminal in the portrait orientation. Make sure that “ ” on the screen points upward.
Page 147 Switching the Recording Scene When you record a movie by the Out-camera, you can automatically adjust the camera settings in accordance with a scene. When you change a scene, the White balance, Photometry, EV, and Picture effect settings are reset. ...
Page 148: Adjusting Brightness
Setting a Position for Automatic Adjustment of the Exposure You can set what position on the screen to use as a reference for the image brightness (EV) adjustment. Press (Func) in the Camera mode display, select [Adjust] → [Photometry], and press The menu for selecting a photometry mode appears.
Page 149: Setting The Camera Operation
Restoring the Default Camera Settings You can reset the camera settings to the default settings. The camera settings listed below can be reset. Item Default setting Item Default setting Select scene AUTO ±0.0EV Zoom magnification ×1 Photometry Center Picture effect White balance AUTO Press...
Page 150 Select [ON]/[OFF] and press The image save method is set. ● An image recorded in the TV style is saved automatically regardless of the Auto save setting. Selecting the Image Quality Default Standard You can select the image quality for recording images. ...
Page 151 Setting the Effective Distance of the Auto Focus Default Normal mode You can set the effective distance of the Auto focus function when you record still images with the Out-camera. Press (Func) in the Camera mode display, select [Set] → [Auto focus], and press The menu for selecting the Auto focus type appears.
Page 152 Restricting the Size of a File Used for Movie Recording Default Attach(L) You can restrict the size of a movie file to a file size that can be attached to i-mode mail. Press (Func) in the Camera mode display, select [Shoot] → [Switch mode] → [Movie shoot], and press The display switches to the Movie shoot display.
Page 153: Using The Bar Code Reader
 The FOMA terminal may not be able to scan JAN or QR code if it is scratched, smudged, damaged, of poor print quality, too small in size, or in certain light reflection conditions. It also may not be able to scan some QR code versions.
Page 154 Press (Save). The data from the scanned JAN/QR code is saved. ● Some QR codes allow you to save data such as a name, phone number, and mail address all at once in the Phonebook just by scanning them. ● When scanned characters cannot be entered in the text editing display, they are replaced with as many spaces (blanks).
Page 155 i-mode/i-motion/i-Channel ※ i-mode is a paid service that requires a subscription. What is i-mode? ......................... 154 Displaying the i-mode Menu ................. <i-mode menu> ■ Displaying a Site Displaying Sites ........................154 Using Sites ......................... 155 Saving a Site in My Menu ................. <My Menu>...
Page 156: Displaying Sites
UIM for the stand-by display, ring tone, and/or other applications, those settings are reset to the initial settings if 天気／ニュース／ヒ゛シ゛ネスモバイルバンキング the UIM is switched to another card or the FOMA terminal 証券／カート゛／マネー／保険交通／地図／旅行 is powered on without inserting a UIM.
Page 157: Using Sites
Ｓｅｎｄ Select an item from the item list. Press (Cnct). Check box The FOMA terminal is connected to the site displayed last. Select one or more items. “ ” of the selected items changes to “ ”.  To cancel the selection, select the check Displaying SSL Site box again.
Page 158 To mute the sound effect, set the Sound effect to [OFF]. Displaying a Site URL ● If you do not operate the FOMA terminal for more than about 30 seconds while the Flash movie is played back, The URL of the currently displayed site can be the playback pauses.
Page 159 Press (Copy). Ｓｅｌｅｃｔ ※Ｙｏｕｗｉｌｌｕｓｅｙｏｕｒｉ−ｍｏｄｅ Press (Cnct). ｐａｓｓｗｏｒｄｔｏｓｕｂｓｃｒｉｂｅａｎｄ The FOMA terminal is connected to the site of the selected ｕｎｓｕｂｓｃｒｉｂｅｓｉｔｅｓａｎｄｓｅｔ URL. ｔｏｙｏｕｒｏｐｔｉｏｎｓ． Enter the current i-mode password at [Current Saving a Site to Display It Password]. Quickly <Bookmark>...
Page 160: Deleting A Bookmark
(Complete). Select [Yes] Select a bookmark and press (Cnct). → a folder. The FOMA terminal is connected to the site of the selected bookmark. Select a bookmark and press (Func). To check the URL The Function menu appears.
Page 161 Deleting a Screen Memo Saving a Site in the Screen Memo You can delete screen memos using three methods. <Screen Memo> Example: Deleting a screen memo You can save sites as your favorite ones in the Screen From the i-mode menu, select [Screen Memo] and Memo.
Page 162: Downloading Data From Sites
[Data Box]:  Follow the same steps as in “Placing a call by specifying Save melodies in the Data Box of the FOMA terminal. a condition” (P.55, step 1 to 4). Select a folder for saving melodies. [microSD]: Save melodies in the microSD memory card.
Page 163 Enter a host address within 30 half-width alphanumeric Default 60 sec characters and symbols. The duration before disconnecting the FOMA terminal Enter each item. automatically can be set when you cannot send or receive data due to heavy traffic at the i-mode center.
Page 164: Receiving A Message
Some graphics may not be displayed correctly even if the - When the FOMA terminal is powered off Display img is [ON]. - When the FOMA terminal is outside of the i-mode ● The setting of the Display img is synchronized with that of service area the Display img of One Seg (P.220).
Page 165 (Mail) for over a second in the stand-by see P.179. display. To display the previous or next message The FOMA terminal is connected to the i-mode center, and to display the previous message or to display an inquiry result is displayed.
Page 166 ＣＡｃｅｒｔ．２ＣＡｃｅｒｔ．３  The screens and operation methods displayed by the ＣＡｃｅｒｔ．４ FirstPass Center may change. ＣＡｃｅｒｔ．５  While the FOMA terminal is connected to the FirstPass Center, ＣＡｃｅｒｔ．６ＣＡｃｅｒｔ．７ you cannot send/receive mail or receive Message R/F. ＣＡｃｅｒｔ．８ＣＡｃｅｒｔ．９...
Page 167 ● FirstPass can be used for Internet communication from the FOMA terminal as well as for Internet communication by [Select host] and press connecting the FOMA terminal to a PC. To use on a PC, Ｓｅｌｅｃｔｈｏｓｔ you must install the FirstPass PC software on the supplied ドコモ...
Page 168 Select [File property]. tracks. You can play back an i-motion on the FOMA When a link is set in the Telop text When you stop or pause playback, a confirmation terminal and set a saved i-motion for the stand-by display.
Page 169 There are two types of channels: “Basic channel” and What is i-Channel? “Favorite channel”. “Basic channel” is provided by DoCoMo and is pre-registered, and therefore you can The i-Channel service provided by DoCoMo or use it from the moment you start using the i-Channel another IP (information service providers) distributes service.
Page 170 (P.161). Normally, you do not need to change the host. ● When the FOMA terminal is powered off, outside of the service area, or in poor radio wave condition, you may The channel list appears. not be able to receive information. When you receive information by pressing (i.ch), the Telop text is...
Page 171 Playing Back/Saving a File Attachment Received in i-mode Mail ........179 ■ Manipulating the Mail Box Displaying Received/Sent/Saved Mail ................180 ■ Setting Mail Setting the Mail Function of the FOMA Terminal ..........<Mail setting> ■ Using SMS (Short Message Service) Composing and Sending SMS (Short Message Service) ...
Page 172 You can use i-mode mail or SMS to send a message [Confirm Mail Address] from a FOMA terminal to an i-mode terminal for the  Users of i-mode terminals (including Mova terminals) need Mova service. The i-mode terminal for the Mova service...
Page 173  Restricting Receiving Mail from Mass i-mode Mail Senders Attached file pref. function provided on the FOMA 【Receiving Mail (Other Settings) → Reject Mass i-mode Mail terminal. When you use a mobile phone of other Senders】...
Page 174: Displaying The Mail Menu
If Unable to Receive SMS (Short Message Service) The SMS received at the SMS center is immediately Composing and Sending sent to the FOMA terminal. When the FOMA terminal is powered off or cannot receive radio waves because i-mode Mail <Compose and send mail>...
Page 175 Enter a subject at [ Entering an Address from the Mail List Enter a subject within 15 full-width or 30 half-width characters. You can send mail to several recipients saved in the mail list. Enter the main body at [ Enter the main body within 5,000 full-width or 10,000 half- Press (Func) in the Edit mail display.
Page 176 Press (Pict/Sym) to enter Deco mail Pict.※ ● Even if you delete a decorated character, the data used Press (Func) in the Input text display, select [Deco. for decoration may not be erased and the number of slcted txt]/[Quick deco. Mail]/[Decorate mail], and set characters in the mail main body that you can enter could decorations using the Cross Deco-palette.
Page 177 When you select [Insert line] Select the font/background color and press Insert a line at the line where the cursor is displayed. to select the font color and to select the When you select [Background color] background color. to select the background Ｉｎｐｕｔ...
Page 178: File Attachment
 Files that cannot be attached to mail and files prohibited from types or size exceeding the capacity, the file attachments being retrieved out of the FOMA terminal cannot be attached. are deleted and only the mail main body is sent to the recipient.
Page 179 To edit saved mail - When the FOMA terminal is powered off From the Mail menu, select [Draft] → [Draft] → mail. - When the FOMA terminal is outside of the i-mode service area - During PushTalk communication Receiving i-mode Mail <Auto receive>...
Page 180 <Check new messages> Compose mail and send it. New mail held at the i-mode center while the FOMA  Follow the same steps as in “Compose and send mail” (P.172, step 2 to 5). terminal is powered off or outside of the i-mode service The mail is forwarded and “...
Page 181 Save other items. Example: Saving the mail address of a received mail sender to  Follow the same steps as in “Add to FOMA terminal the FOMA terminal phonebook as a new entry phonebook” (P.89, step 3) or in “Add to UIM phonebook”...
Page 182 If you obtain a file attachment not yet existing when there exist already 1,000 received mails or there is no more free memory space in the FOMA terminal, the obtained data overwrites the unprotected read mail from the oldest one. Depending on the size of the file attachment to be obtained, multiple mails may be overwritten by it.
Page 183 File attachment type Select a folder and press With image attachment The received/sent/saved mail list appears. Received mail With movie attachment Ｉｎｂｏｘ１／２５ Received date/time With melody attachment Sender １５：５１ドコモ一郎 With ToruCa card attachment Ｐｈｏｔｏｃｏｎｔｅｓｔ Subject １２：３４ドコモ二郎 With i-αppli To Ｃｏｎｃｅｒｔｔｉｃｋｅｔｎｅｘｔ With PDF data attachment ０７／１３携帯なつ子...
Page 184 Example: Adding a folder for received mail Storing the Mail at the Data Security From the Mail menu, select [Inbox], press , and Service Center press (Func). The Function menu appears. You can use the Data Security Service to store up to 10 i-mode mails or SMS messages at one time at the Data Select [Edit folder] →...
Page 185: Deleting Mail
Protecting Mail Displaying i-αppli Mail as Regular Mail Received or sent mail can be protected from being i-αppli mail can be displayed as regular mail. If after overwritten. Up to 500 received mails and 250 sent the i-αppli with mail software is deleted, mail saved in mails can be protected.
Page 186 Sorting Mail Setting the Mail Function of the FOMA Terminal Received or sent mail in a folder can be sorted for <Mail setting> display temporarily. Assigning Separate Folders for Mail Example: Sorting received mail Press (Func) in the received mail list.
Page 187 The Edit signature display appears. Sent mail is held at the i-mode center and not received  If you have saved a signature before, it is displayed. by the FOMA terminal. To receive, use the Receive option (P.177). Press (Edit) and enter a signature.
Page 188 Default Prefer alarm You can set whether the incoming mail or received mail display should appear when you receive mail, SMS, or Message R/F while you are using the FOMA terminal for other tasks. To delete a member From the Mail menu, select [Mail setting] →...
Page 189: Message Service
<Compose and send SMS> Default Valid Regardless of whether you subscribe to i-mode, you You can set whether to automatically receive the file can send/receive text messages between FOMA attached to i-mode mail. terminals.  You can exchange SMS with recipients/senders who From the Mail menu, select [Mail setting] →...
Page 190  When “ ” or “#” is included in the address entered at <Check new SMS> [Address], select [Unknown]. New SMS held at the SMS center while the FOMA [Address]: When you select [Others] at [SMSC], enter an address. terminal is powered off or outside of the service area You can enter up to 20 half-width digits.
Page 191 i- α ppli What is i-αppli? ......................... 190 Downloading i-αppli from a Site ..................191 Running i-αppli ....................<Run i-αppli> Running i-αppli Automatically ................<Auto start> Setting i-αppli for the Stand-by Display ..........<i-αppli stand-by> Managing i-αppli ....................... 197 <i-αppli(microSD)> Displaying i-αppli Data in microSD memory card .........
Page 192: What Is I-Αppli
- Save ring tone  Some software may use the serial number of the mobile - Change ring tone (call, videophone call, mail, message) phone/UIM (FOMA card) of the i-mode terminal. - Obtain picture from Data Box - Save picture in Data Box ...
Page 193: Downloading I-Αppli From A Site
Other Features Downloading i- α ppli from a Site ● i-αppli stand-by display You can download i-αppli software from sites and i-αppli stand-by display enables you to set i-αppli save it. for the stand-by display and to receive mail or place ...
Page 194: Running I-Αppli
Since the “serial number of your mobile The i-αppli folder list appears. phone/UIM (FOMA card)” is sent to IP (information service  The following icons show the type of folder. providers) via the Internet, it might be accessed by a third (Yellow) Preset folder party.
Page 195 [Stand-by NW setting]: ● Some software applications that start up immediately from Set whether the FOMA terminal should connect to the the site may require NW setting while it is running. network when you set an i-αppli software that uses ●...
Page 196 About program booking function Preinstalled Software You can set a timer for watching One Seg by selecting a program you want to watch from the program list provided by Default settings of the preinstalled software are this appli. indicated in the table below. ...
Page 197 Changing playing it. You can also make necessary settings from within the My data software when you get the card updated or the FOMA You can check the player’s status and a gear that the player terminal changed! currently holds.
Page 198: Running I-Αppli Automatically
The Auto start is set. Default Yes ● The Auto start does not operate in the following cases. - When the FOMA terminal is powered off You can set whether to star t i-αppli software - During a call/communication automatically on the FOMA terminal.
Page 199: Managing I-Αppli
Some software can be upgraded automatically when it is started. enter the Security code, and select [Yes]. ● When the FOMA terminal is connected to the network for To delete several software software upgrade, the packet communication charge is required.
Page 200: Displaying I-Αppli Data In Microsd Memory Card
To display the auto start error history Select [Auto start err hist]. the software running on the FOMA terminal. To delete the error history or trace result  There are some data that cannot be exchanged even if the other Press (Delete) and select [Yes].
Page 201 Osaifu-Keitai/ToruCa What is Osaifu-Keitai? ......................200 What is the iC transfer service? ..................200 Starting an Osaifu-Keitai-compatible i-αppli ..............200 What is ToruCa? ......................... 201 Obtaining a ToruCa Card ..............<Obtain a ToruCa card> Displaying a ToruCa Card ................. <Display ToruCa> Managing ToruCa Cards ....................
Page 202: What Is Osaifu-Keitai
IC card function without inserting the i-αppli software supporting IC card. associated UIM. When you use the FOMA terminal with another UIM, you once ● The application procedure for using Osaifu-Keitai- need to delete all Osaifu-Keitai-compatible i-αppli software compatible services varies from one service to another.
Page 203: What Is Toruca
Mail device. QR code ● Even if the FOMA terminal is powered off, you can use the i-αppli Osaifu-Keitai by holding up and showing the FeliCa mark Infrared/ to a reading device (reader/writer). You cannot use it if the iC communication battery pack is not attached.
Page 204: Displaying A Toruca Card
When you obtain a ToruCa card Select [詳細] (Detail) → [Yes] and press from a reading device (reader/ You obtain a ToruCa(detail) card. writer), the FeliCa Sign flashes in To update a ToruCa(detail) card to green, a beep sounds to notify you the latest status that the card has been obtained, From the Function menu, select...
Page 205: Setting The Toruca Details
Japanese alphabetical order if writer) recognize available ToruCa cards automatically both full-width and half-width characters are used. when you hold up and show the FOMA terminal to it in order to use ToruCa. Osaifu-Keitai/ToruCa Continued...
Page 206: Setting Whether To Notify That Within The Communication Range
[Used] even if it is to be deleted regardless of the Auto recognition being set to [ON]. ● If you hold up and show the FOMA terminal to a reading Locking the IC Card Function device (reader/writer) with the Auto recognition set to [OFF], a message confirming whether to use the Automatic <IC card lock>...
Page 207 Watching TV About TV ..........................206 Before Using TV ......................... 208 Setting Channels ..................<Set channel list> Watching TV ................... <Activate One Seg> <Program guide> Using the Program Guide i-αppli .............. <Booking list> Setting a Timer for Watching/Recording a TV Program ........Using Data Broadcasting ....................
Page 208 It also makes it possible to send information to TV http://www.dpa.or.jp/ broadcasters, using the transmission function of a  Regardless of whether you are outside/inside of the FOMA service area, you cannot receive One Seg broadcasting in mobile phone. Use this function to join panel shows, a place where the airwave does not reach or in a time zone enjoy TV shopping, and more.
Page 209 ■ Using information in the broadcast storage area What is Broadcast Storage Area? When information in the broadcast storage area is The broadcast storage area is a storage area inside used while you are watching a program, the message “Use saved info? It may include info used by the same the terminal that is exclusive for One Seg and whose ※1 technical specifications are prescribed by ARIB...
Page 210: Setting Channels
FOMA terminal is outside of the service area or in the Self mode. In that case, try to activate One Seg in the condition the FOMA terminal can communicate by moving into the FOMA service area.
Page 211 Select a place to save to and press (Create). Press (OK), select [Yes], and press The screen for creating a channel list appears. The channel list is saved. Select [Auto channel set] → [Yes] and press ● Depending on the area you use, you may not be able to save a broadcast station correctly even if you set the Select Ｃｈａｎｎｅｌｓｃａｎｎｉｎｇ...
Page 212 Watching TV in the Normal Style Watching TV <Activate One Seg> You can watch One Seg in the Normal style. Press Using the Display for Watching One Seg (TV/DATA) while watching a program to switch between the video and data broadcasting modes (P.217). Normal style From the Menu, select [Entertainment] →...
Page 213  You can set it either in the Normal style or in the TV style. you can watch TV in the horizontal orientation. Example: For the TV style  See “About the Style” (P.27) to switch the FOMA terminal to the TV style. Press (Func) while watching One Seg.
Page 214 Adjusting the Image Quality Switching between the Primary/Secondary Sounds Default Normal Default Primary sound You can set the image quality of the video portion. You can switch the sound between the primary and secondary sounds.  You can set it either in the Normal style or in the TV style. ...
Page 215: Using The Program Guide
Adjusting the Sound Quality Using the Sleep Timer Default Normal Default OFF You can set the sound effect for the sound quality of You can set to terminate One Seg automatically after the One Seg broadcasting. the certain period of time. ...
Page 216 Save each item. Setting a Timer for Watching/ ○: Allowed to be saved −: Not allowed to be saved Recording a TV Program <Booking list> Booking Timer Icon Setting data program recording You can set a timer for watching or recording a One Select [Booking program] (Blue)/ ○...
Page 217 If you select [Yes], the preceding timer terminates slightly ● If you leave the FOMA terminal with the battery pack earlier than the specified time. removed or fully expended for a long period of time, the date and time is reset, and the Booking alarm may not ●...
Page 218 Set the volume at [Alarm volume]. ● Even if the FOMA terminal is outside of the broadcast service area when the timer recording starting time comes, Select from [OFF] and [1 to 5]. the timer recording works effectively.
Page 219: Using Data Broadcasting
If you select [Yes] on the screen for confirming whether to connect to i-mode that appears while using data To display the detailed information of a TV link broadcasting or data broadcasting site, the FOMA Move the cursor to a TV link and press (Detail).
Page 220: Recording A Video
You cannot record a still image while the Rec T.shift is in Recording a Video progress, the FOMA terminal is outside of the broadcast service area, or video playback is in progress. A recorded video is saved in either the [Video] folder in One Seg of the Data Box or in One Seg of a microSD memory card.
Page 221 ● You cannot start the Time shift recording when the FOMA terminal is outside of the broadcast service area. However, if the FOMA terminal becomes outside of the broadcast service area while the Time shift recording is in progress, the recording continues.
Page 222 Setting Not to Hear Sound Effect of Various Settings for TV Data Broadcasting Site <Sound effect> <One Seg setting> Default ON You can set functions regarding One Seg, reset the You can set whether to hear sound effect provided by settings, etc.
Page 223 Setting the Operation for Incoming Mail Resetting the One Seg Settings to the While Watching One Seg Default Settings <Mail telop disp set> <Reset One Seg set> You can reset the settings of the functions regarding Default OFF the One Seg video and sound to the default settings. You can set whether to display telop when you receive The items that can be reset are as follows.
Page 225 Data That Can Be Written/Read to and from the microSD memory card ......236 Saving Data from the FOMA Terminal to the microSD memory card ......... 236 Saving Data from the microSD memory card to the FOMA Terminal ......... 236 Managing the microSD memory card ................
Page 226: Displaying The Saved Image
Flash movie − The Function menu appears.  “ ” appears on the upper right of the icon for images prohibited from being retrieved out of the FOMA terminal. Select [Slideshow] and press To display the saved date/time Ｓｌｉｄｅｓｈｏｗ Press to switch the display temporarily between the Ｉｎｔｅｒｖａｌ３ｓｅｃ...
Page 227: Pasting Text
432)], and [CIF(352×288)]. The style and color of the  You cannot edit preinstalled images or images prohibited text can also be specified. from being retrieved out of the FOMA terminal.  Some images may not be edited. Example: Pasting text and saving by overwriting ...
Page 228 100K bytes and a still image that is prohibited from being and press (OK). retrieved out of the FOMA terminal. The image is trimmed to the selected size. Press (Func) in the file list of My picture.
Page 229  “ ” appears on the upper right of the icon for movie/ adjustment i-motion prohibited from being retrieved out of the Fast-forward Press during playback. Pressing and FOMA terminal. holding also provides Fast-forward. Playback restrictions Fast-reverse Press during playback. Pressing and...
Page 230: Editing Movies
You can clip a portion of a movie of [sQCIF(128×96)], displayed instead of the thumbnail. [QCIF(176×144)], and [QVGA(320×240)] image size ● If you fold the FOMA terminal during playback of a movie/ by specifying the range or size to be clipped. i-motion, the playback is stopped. ●...
Page 231 Converting the Image Size Displaying and Operating Chara-den You can convert a [QVGA(320×240)] image size You can display Chara-den characters saved in the movie into the [QCIF(176×144)] image size. Chara-den folder of the Data Box. Example: Converting the image size and saving by overwriting Press ) in the stand-by display, select From the i-motion file list, select a movie, press...
Page 232 Select music data and press Playing Back Music Data <Music> You can play back music data saved in MUSIC of the Data Box and microSD memory card. Press ) in the stand-by display, select [MUSIC], and press ＭｕｓｉｃＡｔｍｏｓｐｈｅｒｅＳｏｎｙＥｒｉｃｓｓｏｎＰｒｅｓｅｎｔｓＯｒｉｇ．ｐｌａｙｌｉｓ...
Page 233: Playing Back A Melody
When you play back a melody, the FOMA terminal may start vibrating in concert with the melody, regardless of the Vibrator setting (P.103). ● If you fold the FOMA terminal during playback of a melody, the playback is stopped. Data Display/Edit/Management Continued...
Page 234  The video and sound are played back about 1.3 times in the microSD memory card on the FOMA terminal, faster than normal playback. but also use the FOMA terminal as a reader/writer of a  To use the normal playback, from the Function menu, select [Play] → [Standard].
Page 235 ＳＤ＿ＰＩＭＴｏｒｕＣａ The microSD memory card formatted on a PC or other devices ＭＭＦｉｌｅ cannot be used on the FOMA terminal. Be sure to use the Ｏｔｈｅｒｓ microSD memory card after formatting it using the FOMA αｐｐｌｉｄａｔａ terminal (P.237).
Page 236  When you save a Phonebook entry, text memo, schedule, mail, bookmark, and a ToruCa card from the microSD memory card to the FOMA terminal, they are saved as a file formatted for the microSD memory card. Multiple data records of above categories may be contained in a file of the microSD memory card.
Page 237 When Displaying the Folders on a PC When you save data of the FOMA terminal to the microSD memory card, a corresponding folder is created automatically.  The maximum number of files that can be saved is an estimated number, assuming the blank memory is used.
Page 238  While you save the Phonebook, Text memo, Schedule, mail, ○ ○ ○ image, stamp image, and Bookmark, and ToruCa card data, the status of the FOMA terminal Flash movie. is the same as the outside of the service area status. Therefore, MUSIC  You cannot save data from...
Page 239 ● If any data in the microSD memory card has a file name unintentionally when you start formatting. that is not supported by the FOMA terminal, the file name is changed when you update the management information. Press (Func) in the microSD category list.
Page 240 External connection ● If the FOMA terminal is not connected to a PC correctly or terminal the battery level is very low or 0, not only data cannot be sent/received, but also it may be lost in some cases.
Page 241: Managing Data Box
, a n d m o v i e width katakana characters to half-width katakana characters. retrieved from a PC, etc.  If a group with the same name exists in the FOMA terminal Melody i-mode...
Page 242 Data obtained from sites, i-mode mail, or microSD memory card (currently used) i-αppli Data recorded using the camera of the FOMA terminal Select [My picture] and press Data scanned by a bar code reader, data Ｍｙｐｉｃｔｕｒｅ moved/copied from the microSD memory ｉ−ｍｏｄｅ...
Page 243: Sorting Data
(Complete) and select [Yes]. [Size]: Sort data in decreasing order of file size, the largest file To move data from the microSD memory card to the FOMA first. terminal Move the cursor to the data and from the Function menu, [Originated(icon)]: select [Move to main] →...
Page 244 “.” at the beginning of a file name. Select [Yes]/[No] at [Restriction]. [Yes]: Set file restriction. Once you send the file as a mail attachment, it cannot be sent or forwarded from the recipient’s FOMA terminal. [No]: Do not set file restriction. Press (Complete).
Page 245  Even if “◎: Can be edited” is indicated for an item in the above table, you may not be able to change some of the data.  Detailed information of data saved in the microSD memory card may be different from the information displayed on the FOMA terminal.
Page 246 <Movable contents> <Storage information> You can encrypt and move a copyrighted image, You can display the memory use status of the FOMA ® i-motion, melody, PDF data, and Chaku-Uta Full terminal. You can also check the volume used up by downloaded from a site to the microSD memory card.
Page 247 Ｓｈｏｒｔａｇｅ６４ＫＢ data communication. Using the Infrared Communication Select a folder → software and press  The FOMA terminal and the other device can be used within ソフト一覧１／１２ソフト一覧１／１２ about 20 cm apart. The infrared data port must be kept ＸＸＸｇａｍｅ...
Page 248  When you send/receive bookmark or mail data, the folder allocation setting may not be applied depending on the terminal model of a caller/recipient.  You cannot send/receive a file prohibited from being retrieved out of the FOMA terminal. ※1 Saved in a memory space with the smallest vacant memory number.
Page 249: Receiving Data
PushTalk phonebook appears. If you select [Yes], the Sending All Data data is saved in both the PushTalk and FOMA terminal phonebooks. If you select [No], the data is saved in the  It is necessary that you and the receiver determine the 4-digit FOMA terminal phonebook only.
Page 250: Using The Infrared Remote Control
Control  Place the FeliCa mark “ ” of the FOMA terminal over that of the other terminal. Do not move either of the FOMA terminals until the data exchange is completed. Once infrared remote control software is downloaded from a site and saved in the FOMA terminal, the FOMA terminal can be used as the TV or DVD player remote control.
Page 251: Displaying Pdf Data
You can display PDF data saved in My document of Enter the authentication password. the Data Box or microSD memory card. You can also download PDF-compatible data from a site to the FOMA Data exchange is started and the data is added to the existing data.
Page 252 Operating method Searching a Character String of PDF Data Operation Key operation Display the data in original Press (Fit/Tr img). Press (Search) in the PDF data display. size or by adjusting the page width to the display size ＳｅａｒｃｈｃｒｉｔｅｒｉａＳｅａｒｃｈｔｅｘｔ Scroll Zoom in Press...
Page 253 The i bookmark is added. ● The i bookmarks/marks that you have added may be deleted if you attempt to copy them to a PC or other FOMA terminals using infrared/iC communication or the External Memory. Displaying the i Bookmark/Mark List...
Page 255: Music Playback
Music Playback ■ Listening to Music What is MUSIC Player? ....................... 254 Transferring Music Data ...................... 254 ® Downloading Chaku-Uta Full ..................... 256 Playing Back Music Data ..................... 257 Managing the Playlist ......................259 Changing the MUSIC Player Settings ................. 260...
Page 256: What Is Music Player
 You cannot play back music data in the background while operating other functions. Installing SonicStage ■ Music data that can be played back  Do not connect the FOMA terminal to the PC until the Data Box installation is completed. Files that can ...
Page 257 For details about the format and bit rate, see P.254. ● When you set the supplied CD-ROM in the PC and if the “FOMA SO903iTV CD-ROM” window does not appear, click [スタート] → [ファイル名を指定して実行], enter “CD-ROMドライブ名¥SonicStage¥SetupSS.exe” at “名前”, and click [OK]. Check the data according to the displayed messages, and install SonicStage.
Page 258: Downloading Chaku-Uta Full
Transferring Music Data to the FOMA terminal to the Memory mode. microSD memory card Follow the same steps as in “Using the FOMA Terminal with a PC” (P.238, step 1 to 3). You can use SonicStage to transfer music data from a PC to the microSD memory card inserted in the FOMA terminal.
Page 259: Playing Back Music Data
 Do not insert/remove the microSD memory card into/from the [Shuffle all songs]: FOMA terminal while you are playing back music data on the Perform random playback of all music data. MUSIC Player.
Page 260 Move to the Press previous display When you fold the FOMA terminal during playback Press to switch the display of the sub-display between the track information display and clock display. Current status (During playback/Stopped) Ａｔｍｏｓｐｈｅｒｅ...
Page 261: Managing The Playlist
Original playlist playlist, the files of the music data are not deleted. The playlist is created on the FOMA terminal. You can create or edit up to 10 playlists and save up to 36 tracks of music data  You cannot delete music data from an imported playlist or per file.
Page 262: Changing The Music Player Settings
Changing the MUSIC Player Settings Default Play mode: Normal, Repeat: OFF, Surround: OFF, AVLS: OFF From the Music menu, press (Func), select [Music settings], and press ＭｕｓｉｃｓｅｔｔｉｎｇｓＰｌａｙｍｏｄｅＮｏｒｍａｌＲｅｐｅａｔＯＦＦＳｕｒｒｏｕｎｄＯＦＦＡＶＬＳＯＦＦＲｅｓｅｔｓｅｔｔｉｎｇｓ Select a playback mode for music data at [Play mode].
Page 263: Other Convenient Functions
Other Convenient Functions <Multiaccess> Multiaccess Feature ..................Multitask Feature ....................<Multitask> Using the Lifetime Calendar ..............<Lifetime Calendar> Starting the Alarm at a Specified Time ..............<Alarm> Saving Schedules ..................... <Schedule> <My Selection> Performing Frequently Used Functions Quickly ........... <Voice memo> Recording Recipient’s or Your Own Voice .............
Page 264: Multiaccess Feature
Placing a Voice Call during i-mode/Packet Multiaccess Feature <Multiaccess> Communication Multiaccess is a function that enables you to use a Example: Placing a voice call during i-mode voice call, packet communication, and SMS functions Press (MENU) dur ing i-mode or packet at the same time.
Page 265 ■ Task icons Activating a New Function Icon Function name Icon Function name Press (MENU) during the activation of a Mail/i-mode common setting Stand-by i-mode setting function. Phone Settings Phone number entry Storage information USB mode setting PushTalk Input method setting Dial PushTalk My Selection Mail setting...
Page 266: Using The Lifetime Calendar
● When you have more still images, mail, and schedule Sent mail (All)/(Selected)/(OFF) data saved in the FOMA terminal, you can build a more Schedule (All)/(OFF) interesting Lifetime Calendar. We recommend saving data in the FOMA terminal using infrared communication and...
Page 267 - Received and sent mail saved in the FOMA terminal Calendar and set whether to automatically display the - Schedule saved in the FOMA terminal - Name, Des call display, and birthday saved in the FOMA items to remember. terminal phonebook...
Page 268 Select an alarm tone from MUSIC/i-motion/Melody Starting the Alarm at a of the Data Box at [Alarm]. Specified Time <Alarm>  You can set the following files. You can select a Chaku- ® from [i-motion]. Default Select alarm・Auto power on: OFF, File Category File size...
Page 269 Select [ON]/[OFF] at [Auto power on]. Saving Schedules <Schedule> [ON]: When the alarm time comes during power off, the FOMA Up to 300 schedules, such as date and events/ terminal is automatically powered on and the alarm appointments can be saved for management. When a sounds.
Page 270 - While recording a still image/movie ● If you leave the FOMA terminal with the battery pack Select [ON]/[OFF] of the Secret at [ removed or fully expended for a long period of time, the...
Page 271 Set the volume at [Alarm volume]. Select the schedule and press Select from [OFF] and [1 to 5]. Ｓｃｈｅｄｕｌｅｄｅｔａｉｌ To set the volume to [OFF] ２００７／０７／０１Ｓｕｎ１２：００ Press at level 1. ２００７／０７／０１Ｓｕｎ１２：５０ Select a vibration type at [Vibrator]. Ｄｉｓｃｕｓｓｂｕｓｉｎｅｓｓ [Pattern1]: ｐｌａｎｏｖｅｒｌｕｎｃｈ...
Page 272 Note that the Vernal Equinox Day and Autumn Equinox Day Press (i.ch) for over a second in the stand-by display may fall on the dates other than those set on the FOMA and from the Function menu, select [Reset] → [Yes]. terminal because they depend on the announcement by...
Page 273 99 hours, 59 minutes, and 59 ● When the FOMA terminal is folded while recording a voice seconds or the total call duration for voice calls or digital memo during a call, the recording is stopped and the...
Page 274 Resetting the Total Call Duration and Setting the Limit for Alert on Charge the Total Call Charge <Cost limit notice> The display of the total call duration and charge can be Default Set: OFF, Limit: –, Notification: Alarm+Stand-by reset. The count starts from 0 after the reset. You can set an upper limit amount of call charges to Example: Resetting the total call duration alert yourself with an icon or alarm tone when the total...
Page 275: Using A Memo
Using the Calculator Ｎｏｎｅ <Calculator> Enter a memo at [Contents]. You can use the FOMA terminal to perform the four basic operations of arithmetic (＋, −, ×, ÷) for up to Enter a memo within 256 full-width or 512 half-width characters.
Page 276 ● Do not wind the cord of the Earphone/Microphone around Displaying the Settings of the FOMA terminal. Doing so may cause the radio wave condition to be degraded. Various Functions <Application> ● Placing the cord of the Earphone/Microphone close to the antenna may cause noise.
Page 277: Deleting All Saved Data
Use the switch on the Earphone/Microphone to place a Disconnect the Stereo Earphone Set (free sample product) voice call or answer a voice, videophone, or PushTalk call. from the FOMA terminal or set the Earphone mic to [Valid [OFF]: main] and talk using the FOMA terminal microphone.
Page 278: List Of Reset Items
List of Reset Items The items in which settings, that are made through the associated Function menus, etc., are reset by executing the Reset settings or Reset all data&set are as follows. For functions that can be accessed through the menu display, see the list of menus (P.294).
Page 279: Character Entry
Character Entry For kuten codes, see the “Kuten Code List” (PDF format) included in the supplied CD-ROM. You need Adobe Reader (Version 6.0 or later is recommended) to read the “Kuten Code List” (PDF format). If Adobe Reader is not installed on your PC, install it from the same CD-ROM, which also contains the Adobe Reader software.
Page 280: About Entering Text
■ Entering a character assigned to the same key twice About Entering Text or more in succession After entering the first character, move the cursor. The overview of the text entry is described here.  Characters including JIS level 1 and level 2, 6,355 kanji are ■...
Page 281 The matching words list closes and “健闘” is finalized. words list. This is a conversion mode that a look-ahead strategy is applied to by the FOMA terminal. ● The selected words from the matching words list are [User conversion]: displayed with priority over other words next time.
Page 282: Entering Common Phrases
Press (OK). Entering Common Phrases The selected pictographs are entered all at once. For common phrases, see P.308. ● Deco mail Pict. can be entered only in the Edit mail and  Common phrases that are available vary depending on the Edit signature displays.
Page 283: Cutting/Copying/Pasting Text
You can enter characters, numbers and symbols using or cutting next data to it. corresponding 4-digit kuten codes as listed in the  The characters in the clipboard are deleted when the FOMA Kuten code list. terminal is powered off.
Page 284: Restoring The Default Settings
The Prediction dictionary display appears. Up to 20 dictionaries can be downloaded using i-mode To add a word to the User dictionary for use with the FOMA terminal. When enabling a Select [Settings] → [Application] → [Input method] → [Edit user dict].
Page 285: Network Services
This manual provides a brief description of each network service using the approach of operating from the menu of the FOMA terminal. For detailed information on operation of the network services, see the “Mobile Phone User’s Guide 【Network services】 ”.
Page 286: Available Network Services
Deactivate Select [Missed Call notice] → [Deactivate] you are in a location without the radio wave, while the → [Yes]. FOMA terminal is powered off, or when you are in a Check Select [Missed Call notice] → [Check situation where you cannot answer a call.
Page 287: Using The Call Waiting Service
 When you receive a videophone call from a caller who is you are in a location without the radio wave, the FOMA saved as a nuisance caller, it is disconnected after playing terminal is powered off, or you do not answer the call back the call rejection video guidance on the caller’s phone.
Page 288: Using The Caller Id Display Request Service
Set the guidance in the order of English → Japanese. required. To check the settings  You cannot use the FOMA and Mova terminals at the same From the Menu, select [NW Services] → [English time. Guidance] → [Check setting].
Page 289: Selecting An Operation For An Incoming Call During A Call
The Multi Number Service enables you to add up to two numbers, Additional No.1 and Additional No.2 in Default Answer addition to the Basic Number, as your FOMA terminal phone numbers. If you are subscribing to the Voice Mail, Call Forwarding,...
Page 290: Using Officeed
● If you do not yet subscribe to the Multi Number Service, Saving a New Service to Use It use the FOMA terminal with the Multi Number call set to [OFF]. <Additional service (USSD) registration> ● If the Multi Number call is set to Ｃａｌｌｉｎｇ...
Page 291 Data Communication For detailed information on Data Communication, see the “Manual for Data Communication” (PDF format) included in the supplied CD-ROM. You need Adobe Reader (Version 6.0 or later is recommended) to read the “Manual for Data Communication” (PDF format). If Adobe Reader is not installed on your PC, install it from the same CD-ROM, which also contains the Adobe Reader software.
Page 292 Internet service provider. For  The FOMA terminal does not support IP connection. details about usage fees, contact your Internet service  If you are going to connect the FOMA terminal to DoCoMo’s provider. “sigmarionⅡ”/“sigmarionⅢ”/“musea” PDA to perform data You can use DoCoMo’s Internet connection service...
Page 293 A registration number available when you save a packet communication host (APN) in the FOMA terminal. You can wave condition is poor. save up to 10 numbers from one to 10 for the FOMA terminal. Default cid of the FOMA terminal Before Using Data Communication...
Page 294 For the operation procedure after installing the software, see the Help of the software. Perform dial-up connection. A FOMA USB Cable (optional) is required to use the DoCoMo keitai datalink software. Data Communication...
Page 295 Face Marks ......................... 307 Common Phrases ......................308 Multiaccess Combinations ....................309 Multitask Combinations ...................... 310 Services Available on the FOMA Terminal ................. 311 Optional and Related Devices .................... 312 ■ External Device Interface Introduction of Movie Player Software ................313 ■...
Page 296: List Of Menus
List of Menus  You can enter the figure next to some menu names listed below in the menu display to execute the associated function. ■ Normal mode ○: The default setting/s is/are restored. ●: Items deleted Reset Reset all Menu Default Setting Page...
Page 297 Reset Reset all Menu Default Setting Page settings data&set Mail Mail SMS setting Language P.188 setting SMS report Invalid [28] Validity 3days SMSC DoCoMo Type of Number International Address 81903101652 Recv option setting ○ ○ P.185 Attached file Image Valid ○...
Page 298 Reset Reset all Menu Default Setting Page settings data&set − ○ Phone Own number [51] P.42 − ● Phonebook [52] P.94 − ● Call record [53] P.51 − ● PushTalk phonebook [54] P.80 − ● Record Play rec msg P.70 msg [55] −...
Page 299 Reset Reset all Menu Default Setting Page settings data&set Settings Display Menu pattern M a i n b o d y c o l o r “ M e t a l P.114 Black”: Dark Black, Main body color “Brilliant Red”: ○...
Page 300 Reset Reset all Menu Default Setting Page settings data&set Settings Call Earphone Auto answer Set: OFF, To answer: 5sec ○ ○ P.275 Earphone Earph.+speaker ○ ○ P.106 Earphone SW Set: OFF, Memory number: 999 ○ ○ P.274 Earphone mic Valid earphone ○...
Page 301 Reset Reset all Menu Default Setting Page settings data&set Settings Lock/ Acpt/Rjct call ○ ○ P.128 Security Phone No. − ● Group list − ● Reject unknown ○ ○ P.130 Denied no ID User Unset ○ ○ P.129 PublicPhone ○ ○...
Page 302 Reset Reset all Menu Default Setting Page settings data&set NW Services Call Activate − P.285 Forwarding Deactivate − Change FWD number − If FWD number busy − Check setting − Register Caller − P.285 Nuisance Reg. selected No. − Calls Delete all entries −...
Page 303: Simple Mode
Reset Reset all Menu Default Setting Page settings data&set NW Services Chaku-moji Create message − ● P.53 Set Message display Only calls w/ID ○ ○ P.54 Int’l dial Auto conversion ○ ○ P.57 assist  World Call 009130010 Int’l prefix ○...
Page 304: Preinstalled Data
Preinstalled Data ■ My picture ● Preinstalled ® ® BRAVIA _Animation BRAVIA _Image Elegant Red Dark Black Misty White Juicy Fruit Urban Statue Great Nature 音声発着信中テレビ電話発着信中テレビ電話（代替）テレビ電話動作中パケット通信メール受信完了 ● Stamp&Frame Appendix/External Devices/Troubleshooting...
Page 305 ● Deco-mail picture ©So-net ©Disney ● Deco-mail pictograph ©So-net ©Disney Appendix/External Devices/Troubleshooting Continued...
Page 306 ■ i-motion ■ My document ● Preinstalled ● Preinstalled ® BRAVIA _Movie みんGOLホール1攻略図 ■ Menu pattern Dark Black Elegant Red Misty White ■ Templates PostPetテレビ録画編 PostPetテレビ編 PostPet誕生日編 News! See you! ©So-net ■ Quick deco. Mail Appendix/External Devices/Troubleshooting...
Page 307: Characters Assigned To Keys
Characters Assigned to Keys Character mode Kanji/Hiragana mode Katakana mode Alphabetic mode Numeric mode Keys ※ ※ ※ アイウエオあいうえお . @ ／： − ∼ ァィゥェォぁぃぅぇぉか...
Page 308: Special Symbols
Special Symbols  Symbols marked with ■ may not be displayed correctly when sending to i-mode non-compatible mobile phones or PCs. ■ Full-width symbols ■ Half-width symbols Pictographs  Pictographs may not be displayed correctly when sending to i-mode non-compatible mobile phones or PCs. ...
Page 309: Face Marks
Face Marks When you enter the following words in the kanji/hiragana mode, Kao moji (face marks) are entered.  Some of the following face marks may be different from those actually displayed. ※ Face marks that belong to other than the “かお” category appear only when the Prediction conversion is used. Word Kao moji Word...
Page 310: Common Phrases
Common Phrases Category Common phrase .co.jp .go.jp Internet @docomo.ne.jp .ne.jp .com http:// https:// .or.jp .ac.jp www. KAO MOJI1 KAO MOJI2 KAO MOJI3 Greetings おはようございますお疲れさまでしたおやすみなさいお世話になっております昨日は、どうもありがとうございましたこんにちは行ってきますこんばんはいってらっしゃいよろしくお願い致します Business 直行します本日の会議は中止となりました直帰します出欠をご連絡ください休暇をとります...
Page 311: Multiaccess Combinations
※7 In either of the following cases, the FOMA terminal notifies you of an incoming voice call and you can select either to “answer a voice call” or to “continue with PushTalk call”. (The one that was not selected is terminated.) ...
Page 312: Multitask Combinations
The table below indicates whether another function is available for each function in the menu.  The FOMA terminal may not operate as indicated in the table below depending on the status of each function.  Some functions may pause temporarily when they are not displayed in the main display even if already activated.
Page 313: Services Available On The Foma Terminal
When an image recorded using the currently activated Camera/Movie function is not yet saved, the action for “★” is applied. ※6 If the i-mode arrival act is set to [Prefer i-mode], the FOMA terminal does not receive a PushTalk call. ※7 The Receive option cannot be executed.
Page 314: Optional And Related Devices
This FOMA terminal supports “Emergency call location information”. If you use the FOMA terminal to place a call to emergency numbers such as 110, 119, or 118, the information of a location where you are calling from (location information) is automatically notified to the Emergency call acceptance organization such as the Police Station.
Page 315: Introduction Of Movie Player Software
 Check the above website for details about the operating environment, downloading method, operation method, and other information. Troubleshooting First, check if the software update is necessary for the FOMA terminal. If necessary, perform the software update (P.325). Trouble Cause and Remedy ...
Page 316 Stereo Earphone Set (free sample product) to talk on the FOMA terminal. Disconnect the Stereo Earphone Set (free sample product) from the FOMA terminal or set the Earphone mic to [Valid main] and talk using the FOMA terminal microphone (P.275). Appendix/External Devices/Troubleshooting...
Page 317: Error Messages
Error Messages  In some cases, a 3-digit number may be displayed together with a message. This is a DoCoMo own code that DoCoMo displays on the FOMA terminal. Cannot read. You need to format  The microSD memory card is not formatted correctly.
Page 318 Content length exceeds replayable [Point]. Disconnected from PC size for i-motion  The FOMA USB Cable (optional)  Failed to retrieve the data be- is removed improperly while the cause its volume has exceeded Memory mode is active.
Page 319  The host number you set for the information on a UIM inserted the Host selection is incorrect. in the FOMA terminal and its cor- Restore the host number to “iモー Final number exists. Cannot shoot responding information on the IC ド”, the default setting at the time...
Page 320 No memory space saved because of insufficient  Another image recorded by the  The number of entries saved memory on the FOMA terminal. camera cannot be saved be- in the Phonebook has reached Delete unnecessary images cause of no memory to save it 1,000.
Page 321 Root certificate has expired. Connect? service area or in a location without cause its volume has exceeded  The certificate of the FOMA termi- the radio wave. Move to a location the maximum size. nal is not yet valid or has expired.
Page 322  If you signed up for i-mode after Reduce the number of characters. This software is not supported by this starting to use the FOMA terminal, phone power off the FOMA terminal once This certificate has expired. Connect? ...
Page 323  A non-compatible microSD mem-  The Omakase Lock is set. While number) and send again (P.187). ory card is installed in the FOMA the Omakase Lock is set, all key terminal. Install a FOMA terminal- operations are disabled except...
Page 324: Warranty And After Sales Services
※ This FOMA terminal allows you to save data, such as the Phonebook, in the microSD memory card. ※ This FOMA terminal allows you to save i-motion files and data that is used by i-αppli software in the microSD memory card.
Page 325 ※ Depending on the volume of data saved in the FOMA terminal, it may take time or it may not be possible to transfer data to a new terminal.
Page 326: Ｉモード故障診断 (I-Mode Trouble Diagnosis) Site
 No packet communication charge is required for the i-mode trouble diagnosis site.  Available test items vary depending on the model of the FOMA terminal and may be subject to change.  When you check your mobile phone for normal operation on each test item, carefully read the precautions described in the website before starting the diagnosis.
Page 327: Updating The Software
 You can update the software even if the Host selection is set to other than [i-mode(UIM)].  Before updating the software, be sure to fully charge the battery pack of the FOMA terminal.  You cannot update the software in the following cases:...
Page 328 Ｃｈｅｃｋｉｎｇ（Ａｕｔｈｅｎｔｉ− ｃａｔｉｎｇ） The FOMA terminal starts SSL communication to check if the software update is necessary. If necessary, select the timing to start update and press [Now update] : Start updating the software. The software update may not be completed successfully if the server is busy.
Page 329 Ｖｅｒｉｆｙｉｎｇ（Ａｕｔｈｅｎｔｉ− ｃｏｍｐｌｅｔｅｃａｔｉｎｇ） After restarted, the FOMA terminal automatically connects to the server. It takes some time. ● When you did not confirm the update result on the screen in step 3, “ ” (Update complete) appears in the stand-by display.
Page 330 ● If you execute the Reset all data&set or leave the FOMA terminal without a battery pack or with a fully expended battery pack for a long period of time after you complete the reservation, the date and time is reset, and the software update does not start even if the reserved time comes.
Page 331: Protecting Your Mobile Phone From Harmful Data
At first, update the pattern definitions to get the latest definitions. You can detect information related to the data and programs obtained into the FOMA terminal from an external source, such as data downloaded from a site or i-mode mail, and delete data or end the start-up of application that can cause a trouble.
Page 332 - When the UIM is not inserted - When another function is being used - When the FOMA terminal is connected to an external device such as a PC ● If you cancel the downloading operation before it is completed, the data downloaded until this point is deleted.
Page 333 ” (Update definitions) appears. Confirm the information by selecting the icon to clear the notification. ● If you leave the FOMA terminal without a battery pack or with a fully expended battery pack for a long period of time, the date and time is reset, and the Auto-update may not operate correctly.
Page 334: Specifications
Specifications Product name FOMA SO903iTV Dimensions 111×50×19.9 mm (H×W×D) (when folded) Weight About 138 g (with battery pack attached) Continuous stand-by time Stationary state: About 590 hours Moving state: About 450 hours Continuous call time Voice call: About 160 minutes...
Page 335: Number Of Saved And Protected Data Items
DoCoMo be held liable for any damaged or lost data saved in the FOMA terminal. It is recommended that you make a separate note of the data saved in the FOMA terminal or make a backup copy of it using the microSD memory card (P.232). If you have a PC, you can store data in the PC using the DoCoMo keitai datalink (P.292) and the FOMA USB Cable (optional).
Page 336: About The Specific Absorption Rate (Sar) Of Mobile Phones, Etc
About the Specific Absorption Rate (SAR) of Mobile Phones, etc. SAR Certification Information This model phone FOMA SO903iTV meets the MIC’s* technical regulation for exposure to radio waves. The technical regulation established permitted levels of radio frequency energy, based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies.
Page 337 Index/Quick Manual Index ..........................336 Quick Manual ........................348...
Page 338 The index can be used as an “alphabetical table of contents”. Under each headword, terms relevant to it are listed. Not only terms representing function names actually displayed on the FOMA terminal, but also those that are a brief summary about the functions described in this manual.
Page 339 Backlight ......112 FOMA card ......... 34 Chg. to videophone ..... 50 Guide display ....31, 109 FOMA card phonebook ....88 Chg. to voice call ......50 Icon ......28, 137, 210 FOMA terminal phonebook ..88 Common phrases ..... 280 Display sites ......
Page 340 Hands-free mode ......60 Sound effect ......105 Change ........ 157 Hold SSL list ......... 164 i-mode setting ....105, 161 Holding ........64 SSL page ......155 i-mode trouble diagnosis site ..324 Multiple connections .... 285 Terminate i-mode ....156 i-motion ......
Page 341 Send Ir data ......247 Movie player software ....313 Mail security......127 Slideshow ......224 Multi Number Service ....287 Mail setting (FOMA terminal) ..184 Sort ........241 Multiaccess ....... 262 Mail Settings (i-mode center) ..170 Store at Center ..... 226 Combinations .......
Page 342 Switch sound ......212 Pictographs ....... 280 Timer recording ....214 List of Deco-mail pictographs... 303 Name ........111 Time shift ......219 List of pictographs ....306 Network security code ....118 TV antenna ..... 25, 208 PIM lock ........125 Network service ......
Page 343 Schedule alarm ....268 Style ..........27 Secret display ...... 127 Sub display setting ....112 Receive a call ......60 Select date ......269 Sub-address ....... 59 Receive option ....177, 185 Send Ir data ......247 Sub-display ......... 31 Received mail ......
Page 344 Delete ........203 Missed call ......67 Display ......... 202 On hold ........64 Duplication check ....204 Quick record message... 69 Edit folder ......202 Select sub image ....46 IC act. Notice ....... 204 Set call display ..... 111 IC card lock ......
Page 345 MEMO...
Page 346 MEMO...
Page 347 MEMO...
Page 348 MEMO...
Page 349 MEMO...
Page 350 Quick Manual Using the Quick Manual To bring the Quick Manual provided with this manual, separate it at the tear-off line and fold as shown below. ■ Cutting the pages Separate the pages of the Quick Manual at the tear-off line. Tear-off line ■...
Page 355: Manner Mode (P
● When you are driving Using the FOMA terminal while driving is dangerous because it may interfere safe driving. ※ Use the FOMA terminal after stopping the vehicle to park in a safe place or use the Public mode (Drive mode).
Page 356 ※ Can be called from mobile phones and PHSs. ※ Please confirm the phone number before you dial. ※ For further information, refer to the “Nationwide Service Station List” included with your FOMA terminal and other devices. Do not forget your cellular phone or your manners! …...
Page 357 This manual provides instructions on how to install the SO903iTV communication configuration files (drivers) and FOMA PC Setup Software that are both included in the supplied CD-ROM as well as information necessary for performing data communication on the FOMA SO903iTV.
Page 358: About Data Communication
Internet service provider. For  The FOMA terminal does not support the IP connection. details about usage fees, contact your Internet service  If you are going to connect the FOMA terminal to DoCoMo’s provider. “sigmarionⅡ”/“sigmarionⅢ”/“musea” PDA to perform data You can use DoCoMo’s Internet connection service...
Page 359: Security Settings
 PC/AT compatible machine with a built-in PC main unit save up to 10 numbers from one to 10 for the FOMA terminal. or removable CD-ROM drive  U S B p o r t ( U n i v e r s a l S e r i a l B u s Default cid of the FOMA terminal Specification 1.1 compliant)
Page 360: Preparations And Flow Of Data Communication
Connect the USB connector of the FOMA USB Cable to the USB terminal of the PC. The FOMA terminal is connected to the PC and “ ” is Check the installed communication configuration files (drivers) (P.5). displayed on the FOMA terminal.
Page 361: Installing The Communication Configuration Files (Drivers)
(drivers) from this CD-ROM.  A user with Administrator privilege can install the software.  Make sure not to connect the FOMA terminal to a PC using Click [次へ]. the FOMA USB Cable (optional) before the installation is The confirmation window appears.
Page 362 Click [OK]. Click [次へ]. The Terms of Use for FOMA SO903iTV USB Driver appears. The confirmation window appears. Check the contents and click [はい] to accept the Click [OK]. terms. The Terms of Use for FOMA SO903iTV USB Driver appears.
Page 363: About The Foma Pc Setup Software
Click [はい]. Unlike in 64K data communication, a regular phone number is not used for a FOMA packet communication host. You must The uninstallation of the communication configuration files register in advance a host name called APN in the FOMA (drivers) starts.
Page 364 Software To use the FOMA PC setup software, install it from this CD-ROM.  When you install the FOMA PC setup software, be sure to use Click [次へ]. the user account with Administrator privilege of the PC. The Terms of Use for the FOMA PC setup software ...
Page 365 (P.3, 5). desktop window and click [終了]. Example: When using Windows XP  Quit the FOMA PC setup software. Click [終了] at the Click [スタート] → [すべてのプログラム] → [FOMA lower right corner of the software window. PC設定ソフト].
Page 366 Select [その他] for the host and click [次へ]. Start the FOMA PC setup software and click [かん Click [OK]. たん設定]. The host (APN) is loaded from the FOMA terminal. Wait for a few moments. Select [パケット通信] and click [次へ]. Enter a host name (any name) at [接続名].
Page 367 To set [ユーザID] and [パスワード], enter the appropriate “<” “>” “|” “”” and “!”. information supplied by your provider accurately with  If [FOMA SO903iTV] is not set for [モデムの選択], select careful attention to the letter case. [FOMA SO903iTV].  To connect to “mopera U” or “mopera”, your caller ID must be notified.
Page 368 Select [64Kデータ通信] for the connection type and Finished Setting Up click [次へ]. Select [その他] for the host and click [次へ]. Connect the FOMA terminal to a PC before starting this operation. Enter dial-up information. Example: When using Windows XP  About whether you should notify your caller ID, follow the instruction of the provider you use.
Page 369 [最適化を行う]. When the system settings are optimized The system and dial-up settings are optimized. The message “現在、 FOMA端末用に最適化されています。 ” (The settings are optimized for the FOMA terminal.) Restart the PC in accordance with the instructions appears. on the window.
Page 370: Setting Communication Using The Foma Pc Setup Software (When Using Windows Vista)
To use the FOMA PC setup software, install it from this Click [OK]. CD-ROM.  When you install the FOMA PC setup software, be sure to The host (APN) is loaded from the FOMA terminal. Wait for use the user account with Administrator privilege of the PC.
Page 371 Quit the program that is running. Check the contents and click [はい] to accept the terms. Quit the FOMA PC setup software. Click [終了] at the lower right corner of the software window. When you click [いいえ] Installation is canceled.
Page 372 Select [その他] for the host and click [次へ]. Start the FOMA PC setup software and click [かん Click [OK]. たん設定]. The host (APN) is loaded from the FOMA terminal. Wait for a few moments. Select [パケット通信] and click [次へ]. Enter a host name (any name) at [接続名].
Page 373 “<” “>” “|” “”” and “!”. careful attention to the letter case.  If [FOMA SO903iTV] is not set for [モデムの選択], select [FOMA SO903iTV].  To connect to “mopera U” or “mopera”, your caller ID must be notified.
Page 374 Select [64Kデータ通信] for the connection type and Finished Setting Up click [次へ]. Select [その他] for the host and click [次へ]. Connect the FOMA terminal to a PC before starting this operation. Enter dial-up information.  About whether you should notify your caller ID, follow the Double-click the connection icon on the instruction of the provider you use.
Page 375: Setting Communication Without The Foma Pc Setup Software
Disconnecting Communication FOMA terminal. When you use the PC with a different Sometimes, closing the Inter net browser does FOMA terminal connected, it is required to save it again in the new FOMA terminal. not disconnect communication. To ensure the ●...
Page 376 [次へ].  When the message “現在、接続されています。切断してもよろしいですか？” (The line is connected. Are you sure Put a checkmark in the checkbox of [モデム - FOMA you want to disconnect?) appears, select [はい]. SO903iTV] and click [次へ].  When using Windows XP, the message ““XXX” と名前付...
Page 377 The network and dial-up connection window appears.  When multiple modems are connected to a PC, put a Double-click the [新しい接続の作成] icon. checkmark only for [モデム - FOMA SO903iTV] at [接続方法]. The location information window appears.  Remove the checkmark from [ダイヤル情報を使う].
Page 378  When multiple modems are connected to a PC, put a environments of the PC. In this case, go to step 10. checkmark only for [モデム - FOMA SO903iTV] at [接続 Enter a host number at [電話番号] and click [詳細...
Page 379 Check each item of the [全般] tab. When Using Windows Vista  When multiple modems are connected to a PC, put a checkmark only for [モデム - FOMA SO903iTV] at [接続 Click [スタート]→[接続先]. の方法].  Remove the checkmark from [ダイヤル情報を使う].
Page 380: At Commands
● Online command mode The connection is disconnected. Dial-up icon This mode allows you to operate the FOMA terminal using AT commands even if it is in the status where communication is in progress. In this case, an AT command is executed while the terminal remains connected to the destination.
Page 381: At Command List
Only n=0 can be specified (Can be omitted). AT&S<n> Sets the control of the DR signal to be output by the FOMA terminal. AT&S0 Always sets the DR signal to ON (Default, when the parameter is omitted). [&F][&W] Sets the DR signal to ON when the line is connected.
Page 382 AT+CGEQMIN=[<cid.[,,<n>[,<m>]]] Saves the criteria for permitting or not permitting QoS (Quality of Service) AT+CGEQMIN=2,,64,384 notified from the network when packet communication is established. AT+CGEQMIN=2,,64 AT+CGEQMIN=2,,,384 cid=1-10 Used for managing hosts (APN) saved in the FOMA terminal for AT+CGEQMIN= ※1 packet communication AT+CGEQMIN=<cid> ※2 n=None/64 The minimum uplink communication speed (kbps) used between the FOMA terminal and the base station.
Page 383 Displays the version of the FOMA terminal. AT+GMR AT+GMR=? AT+IFC=<n,m> Sets the local flow control method between the PC and the FOMA AT+IFC=2,2 terminal. AT+IFC? n is used for setting the control of DCE by DTE while m is used for AT+IFC=? setting the control of DTE by DCE.
Page 384 AT&W. When this command is executed during communication, the operation for disconnecting the line is performed. Switches the FOMA terminal from the online data mode to the online command mode. The escape guard section is fixed to 1 second.
Page 385 RS-232C interface, does not indicate the actual speed List of Error Reports because the FOMA USB Cable (optional) is used for connection between the FOMA terminal and a PC. Numeric value indication...
Page 386: Kuten Code List
Kuten Code List ’07.6 (Ver.1) A-CQB-100-11(1)
Page 387 In the following Kuten code list, a 4-digit kuten code is expressed by the combination of the row for the first three digits and the column for the last digit. Example: When you wish to input “★” (corresponding to kuten code “0190”), locate it in the Kuten code list and determine the kuten code for it from its row (“019”) and column (“0”).

Foma SO903iTV Manual

Table of Contents

Before Using the Handset

Pushtalk

Sound/Display/ Light Settings

Camera

I- Α Ppli

Osaifu-Keitai/Toruca

Music Playback

Character Entry

Network Services

Appendix/External Devices/Troubleshooting

Quick Links

Chapters

Related Manuals for Foma SO903iTV

Summary of Contents for Foma SO903iTV