Receiving Videophone Calls - Foma D902iS Manual

Transmitting tone signals (DTMF)
You can input tone signals (DTMF) while sending your self image (
den ( ).
･
Tone signals may not be received depending on the receiver's device.
m9 during a call
1
The entered number is displayed and the tone signals (DTMF) are transmitted.
To cancel transmitting tone signals (DTMF): c
･
The tone signals (DTMF) are transmitted by pressing dial keys without pressing m9 while your self
･
image or the camera-off image is being sent.
･
When the tone signals (DTMF) are transmitted, the set frame and still image are canceled.
･
Because tone signals (DTMF) are transmitted using dial keys, you cannot use dial keys to make actions
while sending Chara-den.

Receiving videophone calls

You cannot receive a videophone call by pressing the keys other than t, n or a (Any Key Answer is
･
unavailable).
1
A call is received
t or n
2
z
Enter with dial keys
The ring tone sounds, the display light turns on and the Enter key lights/flashes.
･
The caller's phone number, name, image or video/i-motion will be displayed on
the screen according to the caller's dialing condition or your FOMA terminal
settings. When a call with Chaku-moji is received, Chaku-moji is displayed.
☛P63
To put the incoming call on hold: f
･
Your image is displayed while being connected.
Receiving a videophone call with the substitute image: a
■
The substitute image is sent to the other party when the videophone call is
connected.
･
Even when Chara-den is set as the substitute image, Chara-den may not
be displayed. If this happens, the default image for the substitute image
setting is sent to the other party.
), the camera-off image (
Next
Send DTMF
) or Chara-
83