Advertisement
Submenu item
a Reconnect alarm*
1
b Setting when folded
c PushTalk arv. act
*1 You can change this setting even while the alarm is sounding. The new setting takes effect after the alarm stops.
Receiving PushTalk calls
1
An incoming PushTalk call is received
The PushTalk ring alert sounds, the display lights, and the Enter key lights or flashes.
Blinking
*1 When a caller makes a PushTalk call not notifying the caller ID, the members are indicated as User unset on
receiver's screens.
g or n
2
You can answer the PushTalk call and Connected is notified to the other party.
･
Answering the PushTalk call while FOMA terminal is closed switches on the speakerphone function.
You can also answer a PushTalk call by pressing 0 to 9, (, or # (Any Key Answer). ☛P65
･
Pressing f disconnects the call without answering it. For a group call, Disconnected is notified to the
･
connected members before disconnecting the call.
･
When PushTalk Auto Answer is set to ON, incoming PushTalk calls are automatically answered.
Your FOMA terminal is switched to the communication that uses the speakerphone function.
In Silent Mode, however, the auto answering function does not work. Answer by pressing g or n (you
can also answer by Any Key Answer).
3
Communicate on PushTalk
For details, follow Step 3 of "Communicating on PushTalk". ☛P97
･
Press f when you end PushTalk
4
･
To end a PushTalk call by closing the FOMA terminal, change the setting of PushTalk Close Setting.
INFORMATION
To stop the ring alert and vibrator: C while receiving a PushTalk call
●
You cannot answer incoming PushTalk calls during a voice call. They are registered in the received call history.
●
PushTalk calls cannot be received during a videophone call, videophone call through an external device, data
●
communication, software update, or pattern definition update. The missed calls are not registered in the received call history.
If you receive a PushTalk call during i-mode, the action will be subject to the setting of i-mode Arrival Act: PT.
●
i-mode cannot be used during PushTalk.
●
Response and Hold is not possible for PushTalk. Pressing f disconnects the incoming call.
●
Even if there is an incoming videophone call, PushTalk call or data communication during PushTalk, you cannot answer.
●
They are registered in the received call history.
When no answer is received within the duration (in seconds) set in PushTalk Ring Time, the incoming PushTalk call is
●
terminated. In case of the PushTalk call with 3 or more parties, Disconnected is notified to the connected members.
98
Set an alarm indicating reconnection of a PushTalk call under improved
signal quality which has been cut off due to poor signal quality.
Set whether to end PushTalk by closing FOMA terminal.
Set the action against an incoming voice call during PushTalk.
Phone number, name (when the phone number is registered in
the FOMA terminal phonebook), or User unset*
Description
indicates the caller.
Page
P61
P104
P103
1
is displayed.
Advertisement
Chapters
