Advertisement
& to Switch patterns
3
z
4
Select an area
■
Setting to display new information: Select an area
■
Setting to display notes:
a Select an area
b Select a note
Highlight a note and press p to display the content of the note. Press c to return to the note
･
list. Also, press o on the notepad view screen to set.
Resetting the displayed item in all the areas: m
■
p
z
5
Select Yes
･
If the i-
ppli standby display is set, a confirmation screen subsequently appears asking whether to cancel
α
it.
INFORMATION
If you change the setting for Style Theme, the custom standby display is not displayed, but the setting is saved. If you
●
operate in order of Step 1, Step 2 and Step 5, the custom standby display set before is displayed.
Checking information on the custom standby display
o
1
2
Select an area
INFORMATION
An image and a custom standby display can be set at the same time, but if an animation, Created animation or Flash
●
movie is set, press f after the playback is stopped or paused to display the information of the custom standby
display.
140
1 to 6
･
If the pattern including multiple areas is selected, repeat Step 4.
･
The calendar cannot be set in an area smaller than half of the screen. (e.g. Set
Area1 of Pattern 3)
･
Key guidance cannot be set in an area larger than a quarter of the screen.
(e.g. Set Area1 of Pattern 2)
z
3
The top area is displayed with a red frame.
Press % to move the cursor frame.
･
･
In case the information of the custom standby display is not shown, display by
pressing f repeatedly on the standby display and press o.
z
2
z
Select information type
z
Select Yes
z
p
Advertisement
Chapters
