Advertisement
b: Images can be attached to i-mode Mail to send to
an i-mode terminal or PC. A confirmation screen
is displayed asking whether to convert to 240 x
320 or 320 x 240 (QVGA) when attaching files to
mail.
c: Images can be attached to i-mode Mail to send to
an i-mode terminal or PC.
d: Images cannot be attached to i-mode Mail.
･
640 x 480 (H-VGA), 480 x 640 (V-VGA), 960 x
1280 (SXGA), 1200 x 1600 (UXGA) and 1728 x
2304 (4M) settings are unavailable during the in-
camera shooting.
･
The maximum size of an image file that can be sent
to the i-mode terminal is 500 Kbytes.
･
The still image size best suited for viewing on the
i-mode terminal other than D902i and D902iS is
240 x 320 (QVGA).
･
The setting for size restrictions may be changed
automatically depending on the setting for the
image size.
･
While i-
ppli is running or being set as the i-
α
standby display, the image size cannot be set to
1200 x 1600 (UXGA) and 1728 x 2304 (4M). If the
still image shooting screen is displayed during
i-
ppli running when the image size is set to 1200 x
α
1600 (UXGA) or 1728 x 2304 (4M), the image size
is changed to 960 x 1280 (SXGA).
Flicker adjustment
If you set the flicker adjustment according to the
power supply frequency of the area of use when the
screen flickers under a fluorescent light etc., the
flicker may be able to be reduced.
･
Even if you adjust the flicker under a strong light
source, the flicker may not be disappeared.
･
This setting is also reflected to the flicker
adjustment setting for the videophone and Bar
Code Reader.
m24 on the still image shooting
1
screen or the video recording screen
Press any of 1 to 3
2
Auto ：
Adjusts to reduce the flicker automatically.
50Hz (East-Japan) ：
Adjusts according to the electromagnetic
wave frequency of Eastern Japan.
60Hz (West-Japan) ：
Adjusts according to the electromagnetic
wave frequency of Western Japan.
Restoring the default settings for shooting
Reset the settings for the scene mode/effect,
brightness, color density, white balance and flicker
adjustment to the default settings.
･
For the scene mode/effect, only the out-camera
setting is reset during the out-camera shooting;
only the in-camera setting is reset during the in-
camera shooting.
m25 on the still image shooting
1
screen or the video recording screen
2
Select Yes
Sending still images shot during voice
ppli
α
calls
Send the still image shot during a voice call by
attaching it to i-mode Mail to the other party
during the call.
･
Set the memory to save to Phone in Still Image
Setting to use this function.
t during a voice call
1
2
Shoot a still image
･
When Yes is set for Auto save in Still Image
Setting, a confirmation screen is displayed
asking whether to attach the shot image to
mail. If Yes is selected, the shot still image can
be checked.
･
The still images shot continuously are
displayed as thumbnails. Press O to highlight
the still image.
a
z
3
Select Yes
The shot still image is saved to FOMA terminal
and the mail composition screen is displayed. If
the mail address of the other party you are
talking to has been registered in the phonebook,
the other party's address is inserted in the
receiver field automatically. However, the mail
address is not inserted when Privacy Mode is
active (Authorized access set for Phonebook &
Logs)
･
Depending on the image size or the file size of
the shot image, a confirmation screen is
displayed asking whether to convert the image
size to 240 x 320 or 320 x 240 (QVGA) or save
the image to Data Box. ☛P235
One-shot Message
Next
191
Advertisement
Chapters
