Advertisement
Hearing the ring tone only through the earphone
When connecting a flat type earphone/microphone
set with switch, you can set to hear the ring tone only
through the earphone.
Default Headset + speaker
m8651
1
Press 2
2
･
To hear the ring tone both through the
earphone and the speaker: 1
INFORMATION
When a flat type earphone/microphone set with switch is
●
not connected, the ring tone sounds through the speaker
regardless of this setting.
Even when you set to Headset only, you will also hear the
●
ring tone through the speaker when 20 seconds pass
without answering a call or PushTalk call.
Determining a service provider
This function allows you to select a FOMA service
provider. Select whether to set the service
provider manually or using automatic search.
Determine a service provider when you select
Manual select.
Usually, you do not need to change this
setting.
Default Auto select NW
m885
1
2
Select each item to set
Search method：
Sets how to retrieve a network.
･
If you select Auto select NW, you cannot
set Manual select.
Manual select：
Determines a service provider.
･
A service provider other than DoCoMo
cannot be selected for manual selection
(as of May 2006).
Press p
3
388
Reducing the start-up time after
Alert Preference
power-on
Default ON
1
2
INFORMATION
Even when you set to ON, it takes the normal time to
●
start up in the following cases.
･
･
･
It may also take the normal time to start up after you turn
the power off with any other screen than the standby
display or while
Checking current settings of functions
NW Search Method
1
2
m887
Press 1
To cancel: 2
･
When the remaining battery level is 2 or lower
When the battery pack is replaced
When 24 hours passes after the power was turned off
is being displayed after power-on.
･
During PIM Lock, the specific setting of the item
being locked is displayed as "---".
m842
O to confirm the settings
Quick Start-up
Confirm Settings
Press & to switch
･
between pages.
Advertisement
Chapters
