Setting Of Switching Between A Voice Call And Videophone Call; Setting How Incoming Videophone Calls Are Handled During I-Mode - Foma D902iS Manual

Setting of switching between a voice call and videophone call

Set whether to notify the other party's terminal that your terminal can switch between a voice call and a
videophone call.
･
You cannot change the setting during a voice call or videophone call.
･
This setting cannot be made outside the service area. Operate the terminal in locations with good radio
wave condition.
Default Indication ON: active
m87171
1
Deactivating: m87172
■
Checking the current setting: m87173
■
2
Select Yes

Setting how incoming videophone calls are handled during i-mode

Videophone calls can be received during i-mode packet communication.
Default V.phone priority
m8714
1
Press any of 1 to 4
2
V.phone priority
Packet DL priority
V.phone answerphone：Connects an incoming videophone call to the Voice Mail Service Center.*
Call forwarding
*1 The service is not available as of May 2006.
INFORMATION
Voice Mail Service and Call Forwarding Service are optional subscriber services. Without subscription, even if you set
●
V.phone answerphone or Call forwarding, the action of Packet DL priority takes place.
If Voice Mail Service or Call Forwarding Service is activated and the ringing time for each service is set to 0 second,
●
either service starts its operation, regardless of this setting. Incoming calls are not registered in the received call history.
：Receives a videophone call. When the call is answered, the current packet
communication is disconnected.
：Rejects an incoming videophone call and continues the packet communication.
：Forwards an incoming videophone call to the forwarding phone number.
Notify Switchable Mode
Data Session Arrival Act
1
93