Advertisement
Using Message Service
When Message R/F is received
When Message R/F is received, you are informed
by the screen display, ring alert, vibrator, and/or
the Enter key. The received Message R/F is
saved in FOMA terminal.
･
The maximum number of items that can be saved
☛P38
1
A Message R/F is received
Receiving screen
Reception completed
Reception result screen
and
or
flash and Receiving messages... is
displayed.
When reception is completed, the Message R/F
ring alert sounds, the Enter key lights/flashes, and
the reception result screen is displayed.
Press o on the receiving screen to stop
･
reception.
･
The reception result screen is displayed for
about 15 seconds if you do not press any key or
until the ring tone stops if ring time is set to 15
seconds or longer in Message Alert. When Auto-
display is set, the contents of received Message
R/F are displayed before the display returns to
the previously displayed screen. To return to the
previous screen immediately, press c.
214
Receive Message R/F
Flashing
Flashing
: Unread Message R
exists.
: Unread Message F
exists.
Reception result scrolls.
Number of received
Message R/Fs
When reception fails, "×" is
indicated after Message R or
Message F. To receive
unreceived messages,
perform Check i-mode
Message.
INFORMATION
When there is not enough available storage space or the
●
maximum allowable number of saved items is exceeded,
the received Message R/Fs except unread ones will be
overwritten, oldest first. Be sure to protect Message R/F
you want to keep. ☛P216
･
If the message cannot be overwritten because storage
is filled with unread Message R/F and protected
Message R/F, Message R/F reception is stopped.
(red) or
(red) is indicated on the screen (☛P29). To
receive new messages, display unread Message R/Fs
(☛P215), delete unnecessary Message R/Fs (☛P216)
or cancel message protection (☛P216) beforehand.
The receiving screen or reception result screen will not
●
be displayed depending on Display Priority. ☛P260
Incoming Message R/F is stored in the i-mode Center in
●
the following cases:
･
The power is off
･
During a PushTalk call
･
When reception fails
･
While being out of service area
･
While receiving SMS
･
During infrared communication
･
Connecting to the Data Center
･
While Omakase Lock is on
･
While connecting to the FirstPass center
･
When the storage is filled with unread Message R/F
and protected Message R/F
When FOMA terminal receives Message R/F, the
●
Message R/F in the i-mode Center is deleted.
If there are unreceived Message R/Fs in the i-mode
●
Center,
,
or
(☛P29) is indicated. However,
the icon may not be displayed even when there are
Message R/Fs in the i-mode Center. When the maximum
number of Message R/Fs that can be stored in the
i-mode Center (☛P199) is reached, the icon changes to
,
or
(☛P29).
Displaying newly-received Message R/F
2 or 3 on the reception result screen
1
2
Select a Message R/F
･
When a melody is attached, it plays
automatically. Auto play can be turned off.
☛P259
However, when a Message R/F is displayed
automatically, it does not play.
Viewing the Message R/F screen ☛P215
･
･
During a videophone call
･
In Self Mode on
･
The received
Message R is saved
in Message R and the
received Message F
is saved in Message F.
Advertisement
Chapters
