Advertisement
Setting mail
The following settings can be made for mail:
Setting procedure
iMenu → ENGLISH → d Options → a Mail
Settings → Follow each setting in [ ] below.
･
For details, see "i-mode User's Manual" you
received when you subscribed to i-mode.
■ Changing the mail address [Mail Address
(Change Mail Address)]
You can change the address before the @ symbol
to another, such as "docomo.△△_ab1234yz
@docomo.ne.jp".
■ Checking the mail address [Mail Address
(Confirm Mail Address)]
You can check your current mail address.
■ Registering a secret code [Mail Address (Other
Settings) → Register a Secret Code]
When you use the phone number address, a
4-digit secret code can be registered in addition to
the mail address. Since mail with no secret code
specified is not received, you can avoid receiving
unnecessary mail.
■ Resetting the mail address [Mail Address (Other
Settings) → Reset Mail Address]
You can set your mail address to "mobile phone
number@docomo.ne.jp".
■ Spam Mail Prevention
You can restrict incoming mail by setting to
receive/reject mail in one of the following
methods:
a Reject/Receive Mail Settings [Receiving Mail
(Spam Mail Prevention) → Reject/Receive Mail
Settings]
･
You can receive only the mail through the
specified carrier(s) out of DoCoMo, au,
Vodafone, TU-KA, and WILLCOM.
Of the mail through carriers other than
above, you can receive from the specified
domain(s) or address(es). In addition, you
can reject the mail that pretends to be the
domain of the mobile phone/PHS via
Internet.
b SMS Rejection Settings [Receiving Mail
(Spam Mail Prevention) → SMS Rejection
Settings]
･
You can set to reject SMS to be received
and select from 4 types, Reject All SMS,
Reject Anonymous SMS, Reject Intl. SMS or
Reject Anonymous and Intl. SMS. You can
also confirm the current settings.
c Rejecting mass i-mode Mail senders
[Receiving Mail (Other Settings) → Reject Mass
i-mode Mail Senders]
･
The 200th and later i-mode Mail messages
sent from an i-mode terminal (including
mova terminal) in a single day are rejected.
The initial setting is Reject and you do not
need to make any settings to reject mail
from large-volume senders.
d Rejecting Unsolicited Ad Mail (mail with
" 未承諾広告※ ") [Receiving Mail (Other
Settings) → Reject Unsolicited Ad Mail]
･
Unsolicited mail sent for the purpose of
advertising and publicity without the
receiver's consent that is marked with "未承
諾広告※" at the beginning of the subject can
be rejected. The initial setting is Reject and
you do not need to make any settings to
reject such mail. (The sender is required by
law to add "未承諾広告※" (6 two-byte
characters) at the beginning of the subject.)
■ Restricting mail size [Receiving Mail (Limit Mail
Size)]
You can restrict the i-mode Mail you receive to a
specified size.
■ Checking current settings [Receiving Mail
(Confirm Settings)]
You can check the current settings for receiving/
rejecting mail, etc.
■ Suspending i-mode Mail function [Suspend Mail]
If you do not use the mail function, you can stop it
in the i-mode Center.
Number of characters that can be sent/received
The number of characters that can be sent and
received in i-mode Mail is as follows:
One-byte
characters
Item
(alphanumeric,
katakana, etc.)
Subject
30 characters
Mail address
50 characters
Message
10,000 characters 5,000 characters
Two-byte
characters
(kanji, hiragana,
pictograms, etc.)
15 characters
−
Next
225
Advertisement
Chapters
