Advertisement
2
Select each item to set
Auto redial as voice：Sets whether to redial as voice call automatically when a videophone call is not connected.
：Specifies whether to display either your self image or the other party's image or both
Display setting
：Specifies whether to display your self image or the other party's image on the sub
Sub screen
：Sets the main screen view size.
Screen size
Visual preference ：Sets the quality of outgoing image.
：Sets the display light during a videophone call.
Display light
：Specifies whether to turn on the speakerphone function automatically once a videophone
Speakerphone
Press p
3
INFORMATION
Even when Auto redial as voice is set to ON, redialing may not be performed depending on the situation of the other party
●
or the network.
When Auto redial as voice is set to ON, if you make a videophone call during a packet communication with a PC
●
connected, the call is redialed as voice call without connecting to a videophone call. During a voice call or 64K data
communication, the call is not connected to a videophone call and redialing is not performed, either.
If redialing as voice call occurs with Auto redial as voice set to ON, voice call charges apply instead of digital
●
communication charges.
When Speakerphone is set to ON and Silent Mode is active, if you make a videophone call, a confirmation screen
●
appears asking whether to switch to the speakerphone call. Select Yes or No.
Setting the images to be displayed during a videophone call
Change the images to be sent to the other party during a videophone call such as the substitute image, answer
machine image, response hold image, on-hold image and movie memo image.
･
You cannot set the following images:
・
Still image with a size larger than 176 x 144
・
Animation and Created animation
・
Still image in the format other than JPEG and GIF formats
・
Image that is prohibited from being output from FOMA terminal
images during a videophone call.
･
If you set other than Both sides, Sub screen cannot be set.
screen during a videophone call.
･
When Terminal settings is set, the setting of Display light time (Normal use) in Display
Light Setting (☛P144) applies.
call is connected.
Menu 8234
Image Setting
Next
91
Advertisement
Chapters
