Advertisement
Turning power on/off automatically at the
specified time
･
Auto Power ON cannot be set to operate at the
same time as Auto Power OFF.
Default Auto power ON: OFF Auto power OFF: OFF
Example
Setting Auto Power ON
m852
1
Setting Auto Power OFF: m853
■
2
Select each item to set
Auto power ON：
Set or cancel Auto Power ON.
･
When set to OFF, Time or Repeat cannot
be selected.
Time：
Set the time to automatically turn the power
on.
･
Enter the time in the 24-hour clock. For
single-digit hours or minutes, precede the
digit with 0.
Repeat：
Set Auto Power ON to repeat.
･
When set to OFF, FOMA terminal is
turned on only once at the set time and the
Auto Power ON setting is canceled.
Press p
3
INFORMATION
If the Auto Power OFF is set to ON at the same time with
●
the time for schedule or Alarm Clock, Auto Power OFF is
made after finishing the operation of Alarm Clock or the
schedule. If a snooze operation follows the alarm clock
sound, Auto Power OFF takes place after the snooze
operation ends. If the time set by Auto Power OFF
comes while Timer is operating, the power is turned off
after the end of Timer countdown.
Even if Auto Power OFF is set to ON, when the specified
●
time arrives while FOMA terminal is in any mode except
standby, the power is not turned off. The power is turned
off after the running function completes each job.
However, if the specified time arrives while the terminal
security code entry screen is displayed following the
standby display or the PIN1 code or PIN2 code entry
screen is displayed when FOMA terminal is turned on,
the power is turned off.
Set Auto Power ON to OFF in areas where mobile phone
●
use is prohibited, such as in hospitals, medical facilities
and airplanes.
Alerting with alarms after the specified
time period has passed
Auto Power ON/OFF
When the specified time period has passed,
FOMA terminal alerts you with alarm sound,
vibration and flashing of the Enter key.
1
2
After the specified time has passed
1
2
Enter time period
･
Enter the period from 1 to 60 minutes. For 1 to
9 minutes, do not enter the preceding 0.
Press r
The countdown screen of Timer appears and
countdown starts.
･
Countdown can also be started by pressing
m1.
･
Countdown continues even if a call or PushTalk
call arrives or b is pressed to start another
function during countdown.
If you press c or f during countdown, a
･
confirmation screen appears asking whether to
stop countdown. Countdown continues even
while the confirmation screen is displayed.
The alarm sounds
The alarm (
ロディ
sounds at the volume set
for the call alert volume,
and the Enter key flashes.
If the vibrator is set for
incoming calls in Vibrator
Setting, it operates
according to the setting.
Press f to stop the alarm
The standby display reappears.
･
The alarm stops when a minute has passed
without any operation or any key or button
other than f is pressed. To return to the
standby display, press o.
Timer
アラーム・メ
(Alarm, melody))
Next
367
Advertisement
Chapters
