Page 1
Sound/Display/ Light Settings Security Settings Camera i-mode/i-motion/ i-Channel Mail i-αppli Osaifu-Keitai/ ToruCa GPS Function Displaying/Editing/ Managing Data Playing Music Other Useful Functions Network Services Data Communication Entering Text Using the FOMA Terminal Overseas Appendix/External Device Interface/ Troubleshooting Index/ Quick Manual...
Page 2
Precautions for Handling the External Memory SO903i allows you to use the “Memory Stick Duo” and miniSD memory card. Please take note of the following precautions when handling the External Memory. Do not stick a label, etc. on the “Memory Stick Duo” or miniSD memory card. The label may be removed when inserting/removing it, resulting in malfunction, etc.
Page 3
● Because a FOMA terminal operates using radio frequencies, it cannot be used inside a tunnel, underground, in a building or other locations where radio waves do not reach the FOMA terminal, in locations with weak radio wave condition, or outside of the FOMA’s service area. The FOMA services may not be available on high upper floors of high-rise apartments or buildings, even if you can see no obstructions around you.
Page 4
● Please note that “FOMA SO903i” is called the “FOMA terminal” in this “Manual for FOMA SO903i”. ● This manual describes the functions that can be performed using the External Memory. To use these functions, you need the optional “Memory Stick Duo”...
Selecting the Menu ..........................30 Using the UIM ............................ 32 Attaching and Removing the Battery Pack ..................34 Phonebook Charging the FOMA Terminal ......................35 Checking the Battery Level ..................<Battery level> <Batt Powering On/Off ....................
Chapter title Before Using the FOMA Terminal Page number ※ Please note that the above page is only for explanation purpose and is partly different from the actual page. ■ About the menu operation Throughout this manual the operations for selecting from the menu are described as follows.
Easy Search You can search a function that you want to know or you consider useful to know from a listing sorted by purpose or by a function name. Useful Functions for a Call your phone number Sending or keeping it anonymous ..P.40 (Notify caller ID) hands-free Talking on the mobile phone ......P.47 (Hands-free)
..P.152 (Select save to) Displaying image a recorded ........P.220 (My picture) For Secure Operations of the FOMA Terminal Locking the FOMA terminal from a remote location in case you misplace it ...P.123 (Omakase Lock) accidental use Locking the keys to prevent an ....P.126 (Lock key)
Before Using the FOMA Terminal Part names and functions, Use display, Sub-display, Select menu, UIM, Attach and remove battery pack, Charge the FOMA terminal, Battery level, Power on/off, Initial setting, Date/time, Notify caller ID, Own number Voice/Videophone Call Place voice/videophone call, Change to videophone/voice call, Redial/Received record, Chaku-moji, WORLD CALL, Receive voice/videophone call, Any key answer, Setting when folded, Public mode, Record message/ Videophone message, Call Chara-den, Videophone setting, and so on...
Enter text, Enter common phrases, Pictographs/symbols, Cut/Copy/Paste, Reset data, Download dictionary, and so on... Using the FOMA Terminal Overseas Overview of international roaming, Available services, Place call, Receive call, Network search mode, PLMN setting, Operator name display, Roaming guidance, Overseas service, and so on...
Page 11
Main Functions of the FOMA SO903i “FOMA” is the name of NTT DoCoMo’s mobile service based on the W-CDMA (Wideband Code Division Multiple Access) system, which has been approved as a global standard of third generation (3G) wireless communication systems (IMT-2000 or International Mobile Telecommunications-2000).
Page 12
(P.123). a call and the disposition of a caller by reading this Omakase Lock allows the FOMA terminal to be locked by a advance message before talking to this caller (P.51). request from a subscriber of the UIM inserted in the FOMA terminal.
Page 13
Making Full Use of SO903i! PushTalk You can communicate among several persons Recipient Recipient Recipient (up to five persons including yourself) with a simple operation of pressing for over a second to invoke the PushTalk phonebook, Caller selecting recipients, and pressing .
Page 14
R.10000 Memory Change SO903i has the Data Box and SubMemory as internal memories, and supports two types of External Memory media (“Memory Stick Duo” and miniSD memory card). By simply pressing (Chg.Mmry), you can switch the display of memory contents between the Data Box, SubMemory, and External Memory (P.227, 234).
Handling the FOMA Terminal, Battery Pack, Adapter (including the charger), and UIM ..12 Handling the FOMA Terminal ............ 14 For safe and proper use of the FOMA terminal, please Handling the Battery Pack............16 read the “Safety Precautions” prior to use. Keep the Handling the Adapter (including the charger) ......
Page 16
/ p l ay b a c k m o v i e s , p l a c e a allow these objects to get into the FOMA videophone call, or use i-mode or i-αppli terminal, battery pack, or adapter.
Power off the FOMA terminal in a place Handling the FOMA Terminal where the use is prohibited such as in airplane or hospital. WARNING Failure to do so may affect electronic equipment and electronic medical Do not use the FOMA terminal while equipment.
Page 18
The FOMA terminal may hit you or others Don’t Metals are used as listed below: or the strap gets cut away from the FOMA Surface terminal. It may cause accident such as Where it is used...
Do not forcibly attach the battery pack to the FOMA terminal. Also, make sure to attach the battery pack in the correct Handling the Adapter (including the Don’t direction.
Do not place any heavy objects on the desktop holder with a cloth or bedding. cord of the adapter (including the charger) The FOMA terminal may fall off the or the power cord. Don’t charger or heat up and cause fire or Doing so may cause electric shock or malfunction.
Do not put the FOMA terminal in a bag full of items or sit cardiac pacemaker or implantable down with the FOMA terminal in your hip pocket. This may cardioverter defibrillator.
Page 22
● Do not sit down with the FOMA terminal in the hip ◆ Adapter (including the charger) Precautions pocket of your trousers or skirt. Also, do not keep the ● Charge the battery pack in an environment with the FOMA terminal in a place where it may be subject to proper ambient temperature (5°C to 35°C).
◆ FeliCa Reader/Writer ◆ Trademarks “FOMA”, “mova”, “i-mode”, “i-channel”, “PushTalk”, ● The FeliCa reader/writer function of the FOMA “PushTalkPlus”, “ToruCa”, “i-αppli”, “i-αppli DX”, “i-motion”, terminal uses extremely weak radio waves, so that “i-area”, “Deco-mail”, “Chaku-moji”, “Short Mail”, “mopera no license is required for use as a radio station.
Page 25
You cannot use the Stereo Earphone Set (free sample product) to talk on the FOMA terminal. Disconnect the Stereo Earphone Set (free sample product) from the FOMA terminal or set the Earphone mic to [Valid main] and talk using the FOMA terminal microphone (P.269).
Page 26
About the Sub-display ......................29 Selecting the Menu ......................30 Using the UIM ........................32 Attaching and Removing the Battery Pack ................34 Charging the FOMA Terminal ....................35 Checking the Battery Level ................<Battery level> Powering On/Off ....................<Power on/off>...
FOMA terminal. Disconnect the Stereo Earphone Set (free sample product) from the FOMA terminal or set the Earphone mic to [Valid main] and talk using the FOMA terminal microphone (P.269). Before Using the FOMA Terminal...
Page 28
When you perform infrared communication (P.240) or use the In the stand-by display, press for over a second to turn off the FOMA terminal as a remote control (P.243), point this port to the notification icon (P.28). target device or equipment.
Notification display Clock (P.39) (P.28) Clock (P.39) → 最高10℃ 10% i-Channel Telop text (P.171) Missed call 1 Notification display (P.28) → 最高10℃ 10 i-Channel Telop text (P.171) Mail i−mode Link Guide display (P.29) MENU i.ch Before Using the FOMA Terminal...
Page 30
During GPS measurement of location (P.212) ● The FOMA terminal’s display is manufactured based on the leading edge technologies, and some pixels unlit or lit may appear constantly in the display. This is not a malfunction. Before Using the FOMA Terminal...
Page 31
A record message is saved at the Voice Mail Service Center ※1 (P.272). USB cable cncted The FOMA USB connection cable (optional), etc. is being connected (P.233). PB update failed The Phonebook auto-update at the Data Security Service Center has failed (P.97).
Guide Display To utilize the FOMA terminal’s functions, use the four-way keys (Up/Down/Left/Right arrow keys), the enter key, the Mail key, the i-mode key, the MENU key, and the i-Channel/My Selection key according to the instructions shown in the guide display.
Selecting the Menu Default Menu guide display (Normal mode): OFF, Menu guide display (Simple mode): ON The FOMA terminal provides various functions. Press (MENU) to display the menu display. You can switch the menu display between [Normal] and [Simple] as well as change menu icons to be displayed in the Normal mode (P.113).
Make sure to keep a removed UIM safely. About the UIM Security Code You can set two Security codes, namely “PIN1” and “PIN2”, for the UIM (FOMA card). These codes are set to “0000” at the time of subscription. You can change them to any 4- to 8-digit number you want (P.121).
Page 36
When you replace the UIM with another one or if you do not have a UIM inserted in the FOMA terminal, you are unable to display or play back the data or files for which the UIM operation restriction function is set or if they are sent using the infrared or iC communication or attached to mail.
WORLD WING service- compatible terminal with your UIM (green). WORLD WING is available for SO903i only in the DoCoMo 3G roaming service area. In the GSM service area, you can use WORLD WING by replacing the terminal with a GSM-compatible one.
(DoCoMo shop, etc.). Do not charge the battery pack for a long period of time (more than 24 hours) with the FOMA terminal powered on. If the FOMA terminal is powered on when charging is completed, the battery level decreases. This causes the FOMA terminal to restart charging.
Page 39
How to Charge the FOMA Terminal Below is the procedure to charge the battery pack using the optional Desktop Holder SO04 with the FOMA AC Adapter 01 connected. Make sure to see the user’s manuals of the Desktop Holder and AC Adapter.
AC outlet. ● Make sure that the phone strap does not get caught in between the FOMA terminal and the desktop holder. ● The fuse (2.0 A) of the DC adapter is a consumable part. Purchase an equivalent fuse from an automobile parts store when it is necessary to replace the fuse.
Powering On/Off <Power on/off> When you power on the FOMA terminal, the screen for confirming whether to execute the software update may appear (P.324). Press (PWR) for over two seconds. The FOMA terminal is powered on, the display and the keypad lights are turned on, and an animation is displayed.
● If you perform the Reset all data&set or do not change the Security code of the FOMA terminal or Location request setting, the message “Initial setting is incomplete. Execute?” appears when you power on the FOMA terminal. When you select [Yes], the display in step 1 appears and you can perform the initial setting.
Move the cursor to a phone number and press ma 03XXXXXXXX To send i-mode mail △△ docomotaro@ .□□□ Move the cursor to a mail address and press (Mail). To check the image Move the cursor to the image and press (Play). Before Using the FOMA Terminal...
Page 44
To display the entry saved as Secret, set the Secret display to [ON]. Press (Complete). Your personal data is saved. To reset to the default settings From the Function menu in the Own number display, select [Reset all] → [Yes]. Before Using the FOMA Terminal Continued...
Page 45
At the time of purchase, your mail address does not appear. Check your mail address by selecting (i-mode) → [i Menu] → [ENGLISH] → [Options] → [Mail Settings] → [Confirm Mail Address]. When you change your mail address, edit the Own number display accordingly. Before Using the FOMA Terminal...
Page 46
Receiving a Call by Switching to/from Voice/Videophone Call ..........60 Pressing a Key on the Keypad to Receive a Call ........<Any key answer> Setting the Operation for the FOMA Terminal Being Folded during a Call ... <Setting when folded> Using the Low Voice Feature .................
Page 47
※2 DoCoMo’s videophone complies with “3G-324M standardized by 3GPP for global standard”. The FOMA terminal cannot be connected to a videophone that uses a different system. ※1 3G-324M Global standard for third-generation mobile videophones. ※2 3GPP (3rd Generation Partnership Project) Local standardization committee set up for development of common technology specifications related to third-generation mobile wireless communication systems (IMT-2000).
Page 48
Placing a Voice/Videophone Call Check the radio wave condition and enter a phone number. Do not cover the antenna with your hand for a call in better radio wave condition. Example: Placing a voice call Enter a phone number in the stand-by display. ...
Page 49
When you place a videophone call to a terminal that is not equipped with a videophone function, or when a recipient is outside of the service area or the phone is powered off (even if the FOMA terminal has the videophone function), your call is not connected.
Page 50
When you finish the call, the hands-free operation is automatically canceled. ● Talk into the FOMA terminal from a distance of 30 cm or less. Entering a Pause, Timer, or + You can include a pause, timer, or + in a phone number (within 80 digits in all) to place a call.
Page 51
When the call is switched to the videophone call, your image is sent to the recipient and the call is switched to the hands-free operation that allows you to hear the recipient’s voice from the speaker. ● If packet communication is in progress, it is disconnected and the FOMA terminal is switched to videophone. ●...
Page 52
Using the Redial/Received Record <Redial record/Received record> Up to 30 previously placed/received calls are saved as call records with their dates/ times, phone numbers, and names. The phone numbers or names appear in descending order from the most recent call. For a PushTalk call, the group name or the first member’s name appears.
Page 53
To send mail You can send mail to a person whose phone number and mail address are saved in the Phonebook. Move the cursor to a call record and from the Function menu, select [Reply by mail] → a mail address. Compose mail and send it. To save in a group of the PushTalk phonebook When you perform PushTalk communication among several persons saved in the PushTalk phonebook, move the cursor to a received record of the PushTalk call (...
Page 54
Deleting the Redial/Received Record The call records are retained even if the FOMA terminal is powered off. If you do not wish others to know the previously dialed records, delete one or all of the call records. If you delete either a redial record or a dial frequency record, both records are deleted.
Page 55
Setting the Display for Chaku-moji Being Received Default Only calls w/ID You can set the display style to be used when you receive a Chaku-moji message. From the Menu, select [NW Services] → [Chaku-moji] → [Set Message display] and press [Display all Msgs] : Receive and display all Chaku-moji.
Page 56
● When a Chaku-moji is received by the recipient, “ ” appears in the sender’s terminal display and charge is required. ● If the recipient does not receive the Chaku-moji, “ ” appears. In this case, there is no charge. (For example, when the recipient’s terminal does not have Chaku-moji support or if the Chaku-moji was received in a condition other than that set using the Set Message display menu.) ●...
Page 57
Select [Voice call] and press The menu for selecting a Chaku-moji message appears. For details about how to place a call together with a Chaku-moji message, see P.52. Select [No message] and press [Call] : The voice and videophone calls follow the setting of the Set Notification.
Page 58
※ See the NTT DoCoMo’s website for information about countries to which a videophone call can be connected and telecommunication companies. ※ A recipient’s image displayed on the FOMA terminal may be fuzzy or a call may not be connected successfully depending on the terminal to which the international videophone is connected.
Select [ON]/[OFF] at [Auto conversion]. [ON] : Automatically add the additional number you set for the Int’l prefix/Country code. [OFF] : Do not automatically add the additional number. Select [Int’l prefix] and press The Int’l prefix setting display appears. Select an input field and press Int’l call1...
Page 60
Placing a Call by Specifying a Sub-address <Sub-address> Default You can set to place a call to a specific phone or communication device by specifying a sub-address. The sub-address is also used when you select a content in V-Live. From the Menu, select [Settings] →...
Page 61
When a setting is made for hearing sound from the hands-free device, a ring tone sounds from the hands- free device even if the FOMA terminal is set to the Manner mode or its Ring volume is set to [OFF].
Page 62
You can preset the hands-free function of a videophone call to [OFF] (P.71). ● You may hear beeps (ring tone during a call) while talking on the FOMA terminal. If [Answer] is set for the Arrival Call Act with the Voice Mail Service, the Call Forwarding Service, or the Call...
Page 63
Receiving a Call by Switching to/from Voice/Videophone Call A caller can switch between voice and videophone calls during a call. When the caller switches the voice call to the videophone call, a recipient can select whether to send a camera image. ...
Page 64
When the Flat-Plug Switched Earphone Mic (optional) is connected, the Setting when folded is disabled and the call continues even if you fold the FOMA terminal. If it is during a videophone call that you fold the FOMA terminal, a substitute image is sent.
Putting a Call on Hold during a Call <Holding> The call can be put on hold during a voice or videophone call so that your voice cannot be heard by the recipient. Even if the call is put on hold, the caller is charged for the call. Press (Func) during a call, select [Holding], and press Both you and the recipient hear the melody “Hamabe no uta”.
Page 66
- Loc. provide/check tone ■ Operation for an incoming call when network services and the Public mode (Driving mode) are set FOMA terminal’s operations for an incoming call while the Public mode is set depend on what network services are used, as follows.
Page 67
■ When the Public mode (Power off) is set If there is an incoming call when the FOMA terminal is powered off or you are outside of the service area or in a location without the radio wave, the guidance for the Public mode (Power off) is played back to inform the caller that you are unable to answer the call because you are in a place where it is required to power off a mobile phone, and then the call is disconnected.
Page 68
The FOMA terminal can record up to three record messages and videophone messages, each for up to about 15 seconds. If three record messages have been recorded, the Record message does not function. Similarly, when three videophone messages have been recorded, the Videophone message does not function.
Page 69
When Receiving a Call The answering message is played back to the caller after the ring tone Play answer message ドコモ一郎 sounds for the set duration. To talk to the caller Press When you receive a videophone call The answering message is played back and the answering image is displayed to the caller.
Page 70
Record message is [OFF]. If three record messages are recorded when the FOMA terminal receives a voice call, the Quick record message function cannot be operated. Similarly, if three videophone messages are recorded when it receives a videophone call, the Quick record message function cannot be operated.
Page 71
Playing Back/Deleting a Record Message/Videophone Message/Voice Memo You can play back or delete a recorded record message/videophone message and voice memo (P.265). Playing Back a Record Message/Videophone Message/Voice Memo Example: Playing back a record message Press in the stand-by display, select [Play rec msg], and press To play back a videophone message Play record message...
Page 72
Using Chara-den When you place a videophone call, you can send a character instead of a camera image. You can press keys on the keypad to move a character or some character’s mouth to correspond to the voice on the microphone. ...
Page 73
Setting the Videophone Operation <Videophone setting> Setting the Display to Be Used in a Videophone Call Default Main-Other side You can set the image to be displayed on the videophone images (Large) and (Small) during a videophone call. From the Menu, select [Settings] → [Call] → [Videophone] → [Display setting] and press [Main-Other side] : Display the recipient’s/caller’s image on the videophone image (Large) and your image on the videophone image (Small).
Page 74
[OFF] : You hear the recipient’s/caller’s voice from the earpiece during a videophone call. Select [ON]/[OFF] and press The Hands-free is set. ● When the Flat-Plug Switched Earphone Mic (optional) is connected to the FOMA terminal, you hear a recipient’s voice from the Earphone Mic, regardless of the Hands-free setting. Voice/Videophone Call Continued...
Page 75
Setting Notice for Switching between Voice and Videophone Calls <Videophone switch notice> You can set whether to notify the recipient/caller that the FOMA terminal is capable of switching between voice and videophone calls. You cannot perform this setting when you are outside of the service area or in a place where radio waves do not reach, or during a voice or videophone call.
Page 76
PushTalk What is PushTalk? ........................ 74 Originating a PushTalk Call ....................76 Adding a Member during PushTalk Communication ............77 Receiving a PushTalk Call ....................77 Saving Data in the PushTalk Phonebook ................78 Originating a PushTalk Call Using the PushTalk Phonebook ..........80 Deleting a PushTalk Phonebook Entry .................
What is PushTalk? You can communicate among several persons (up to five persons including yourself) with a simple operation of pressing for over a second to display the PushTalk phonebook, selecting recipients, and pressing . Every time you press speak, you are charged for PushTalk communication. You can speak while you press and hold , and the rest of the members can only listen while you are speaking.
Page 78
Using the Display during PushTalk Communication Main display : During PushTalk communication : Hands-free ON Active speaker The phone number (or the member name when the speaker is saved in On PushTalk the Phonebook) appears ドコモ一郎...
Originating a PushTalk Call You cannot originate a PushTalk call during a voice call, a videophone call, or data communication. If you originate a PushTalk call during i-mode communication, the i-mode communication is terminated. Originating a PushTalk call while running i-αppli also stops the i-αppli. Enter a phone number in the stand-by display.
The screen for selecting the method of adding a member appears. [View PushTalk PB] : Select a member from the PushTalk phonebook. [View phonebook] : Select a member from the FOMA terminal phonebook. [Direct input] : Enter a phone number directly.
: Save new data in the FOMA terminal phonebook and then save it in the PushTalk phonebook. Follow the same steps as in the Add to FOMA terminal phonebook (P.87, step 3 to 4). Select [View phonebook] and press The FOMA terminal phonebook appears.
Page 82
03XXXXXXXX ● When you save a person saved as Secret in the FOMA terminal phonebook in the PushTalk phonebook, the entry is not displayed in the PushTalk phonebook. To display the name, set the Secret display to [ON]. Setting a Group You can originate a PushTalk call to several recipients by saving them in a group as members beforehand.
Originating a PushTalk Call Using the PushTalk Phonebook If you save persons as members in the PushTalk phonebook, you can originate a PushTalk call to several persons. Press for over a second in the stand-by display, select a member, and press “...
Select a member and press (Func). The Function menu appears. Select [Delete] → [Delete one] → [Yes] and press The screen for confirming whether to delete the corresponding entry from the FOMA terminal phonebook appears. Select [Yes]/[No] and press The selected member is deleted.
Using the PushTalk Phonebook <PushTalkPlus> You can connect to the network and use the PushTalkPlus service (P.74). To use the PushTalkPlus service, you must subscribe to this service. Press for over a second in the stand-by display and press (Func).
Page 86
Sending Your Own and Member’s Caller IDs Default When originating a PushTalk call or adding a new member during PushTalk communication, your own and all member’s phone numbers can be shown in the recipient’s display. A phone number is an important personal information. Carefully decide whether you want to notify members of your and member’s caller ID.
Page 87
When the FOMA terminal is folded, the hands-free call is performed regardless of the Hands-free setting. ● When the FOMA terminal is opened while the Manner mode is set, the hands-free call is disabled regardless of the Hands-free setting. Setting the Operation for the FOMA Terminal Being Folded during PushTalk Communication...
Page 88
Phonebook Phonebooks the FOMA Terminal Can Use ................86 <Add to FOMA terminal phonebook> Saving an Entry in the FOMA Terminal Phonebook ..<Add to UIM phonebook> Saving an Entry in the UIM Phonebook ........... Saving the Redial/Received Record in the Phonebook ............90 Saving a Group .....................
Page 89
Secret or a group that includes a person saved as Secret, set the Secret display to [ON]. ● The saved data may be lost as a result of malfunction, repair, or other handling of the FOMA terminal. Under no condition will DoCoMo be held liable for any damaged or lost data saved in the Phonebook, etc.
Page 90
Saving an Entry in the FOMA Terminal Phonebook <Add to FOMA terminal phonebook> Up to 1,000 entries can be saved in the FOMA terminal phonebook. Press ) in the stand-by display and press (Create). Select [Main memory] and press To save an entry in the UIM phonebook Edit phonebook...
Page 91
To display the entry saved as Secret, set the Secret display to [ON]. Press (Complete). The entered data is saved in the FOMA terminal phonebook. ● If you set [None] for the Des call display, Des phone/mail tone, or Select phone/mail Illum., then the call image, ring tone, and indicator color saved for the Group setting are automatically used for the respective function.
Page 92
@ mark. Press (Complete). The entered data is saved in the UIM phonebook. ● Data copied from the FOMA terminal phonebook or received using a function such as the infrared or iC communication may not be saved correctly. Phonebook...
Page 93
The Edit phonebook display appears. To save to the UIM phonebook Select [UIM]. Save other items. Follow the same steps as in the Add to FOMA terminal phonebook (P.87, step 3) or in the Add to UIM phonebook (P.89, step 3). Press (Complete).
Page 94
Saving a Group <Group setting> Up to 20 groups can be saved in the FOMA terminal phonebook, and up to 10 groups can be saved in the UIM (FOMA card) phonebook. You cannot change [ No Group] in the UIM phonebook.
Page 95
To display the UIM phonebook あ か さ た な は ま や ドコモ一郎 Press (UIM). Every time you press the key, the display switches ドコモ三郎 between the FOMA terminal and UIM phonebooks. “ ” appears in ドコモ二郎 the UIM phonebook. ドコモ太郎 To switch the display format temporarily From the Function menu, select [Chg.
Searching the Phonebook <Search phonebook> The Phonebook can be searched to display up to 100 entries temporarily. Press (Func) in the Phonebook. The Function menu appears. Select [Search] and press [Name] : Enter part of a reading within 32 half-width characters. For the UIM Search phonebook...
Press (Edit). The Edit phonebook display appears. Edit each item. Follow the same steps as in the Add to FOMA terminal phonebook (P.87, step 3) or in the Add to UIM phonebook (P.89, step 3). Press (Complete). The edited data is saved in the Phonebook.
Page 98
Storing (Restoring/Updating) the Phonebook at the Data Security Service Center You can use the Data Security Service to store the FOMA terminal phonebook at the Data Security Service Center. For details about updating the Phonebook, see P.97. Press (Func) in the Phonebook.
Page 99
Checking the Number of Entries Saved <Memory status> You can check the number of entries saved in the FOMA terminal phonebook and UIM (FOMA card) phonebook and the number of locations still available or entries saved as Secret. Press (Func) in the Phonebook.
Page 100
Using the Data Security Service <Data Security Service> You can use the Data Security Service to store the FOMA terminal phonebook at the Data Security Service Center. You can update or restore the stored Phonebook by connecting to the Data Security Service Center.
Page 101
Displaying the Communication History You can save up to 30 history records of communication with the Data Security Service Center. When the number of communication history records exceeds 30, the records with the oldest date/time are overwritten, in that order. From the Menu, select [LifeKit] →...
Page 102
Light Settings Setting the Ring Tone/Image/Indicator Color for Incoming Call and Mail ..<Incoming set> ■ Setting the Ringer Setting the Sounds of the FOMA Terminal ..........<Set basic tone> Adjusting the Volume of Caller’s Voice ..............<Volume> Adjusting the Volume While Playing Flash Movie ..........
Setting the Ring Tone/Image/Indicator Color for Incoming Call and Mail <Incoming set> Default Ring tone: 着信音1, Link incoming call: OFF (Videophone), Link receive mail: ON (MessageR・MessageF), Ring volume: 3, Incoming image/Receiving img: 音声発着信中(voice call)/テレビ電話発着信中(videophone call)/ パケット通信(mail・MessageR・MessageF), Vibrator: OFF, Color: C9:Color9, Ring time: 4 sec (mail・MessageR・MessageF) You can set a ring tone, ring volume, incoming image, vibration pattern, and incoming indicator color for each type of incoming transmission (voice, videophone, or PushTalk...
Page 104
Set the volume of the ring tone at [Ring volume]. Select from [OFF] and [1 to 5]. For an incoming voice, videophone, or PushTalk call, you can set [Step down] and [Step up]. [Step down] turns down the volume every six seconds and [Step up] turns up the volume every six seconds. To set the ring tone volume to [OFF] Press at level 1.
FOMA terminal about 40 cm (this distance depends on the sense of an individual) away and facing toward you. Note that if the FOMA terminal is moved left or right or the distance between the terminal and you is not suitable, you cannot enjoy the effect. The perception of this 3D effect varies depending on the senses of an individual.
Adjusting the Volume of Caller’s Voice <Volume> Default The volume of caller’s voice during a voice, videophone, or PushTalk call can be adjusted in five levels from level 1 (smallest) to level 5 (largest). From the Menu, select [Settings] → [Call] → [Call setting] → [Volume] and press The Volume display appears.
Setting the Sound/Indicator While Using the GPS Function Default Volume: OFF (Position location)/3 (Location notice・Loc. provide/accept・Loc. provide/check), Vibrator: OFF, Color: ON (Position location・Location notice) You can set the sound volume to be used and the vibrator and incoming indicator operations to be performed when you position and notify your current location and when you are requested to provide your location information.
You can set the position where the ring tone sounds when the Flat-Plug Switched Earphone Mic (optional) is connected to the FOMA terminal. The other tones, such as the Alarm and Schedule alarm tone also sound from the position you set for the ring tone.
Muting the Ring Tone <Manner mode> All sounds from the FOMA terminal can be disabled to avoid disturbing others by using the Manner mode. There are three types of the Manner mode. Set the mode by using the Manner mode setting (P.107).
Changing the Manner Mode Settings <Manner mode setting> Default Set: OFF, Mode: Manner The Manner mode can be selected from three types: “Manner”, “Silent”, and “Original manner”. Press in the stand-by display. Manner mode Set OFF Mode Manner Original manner Select the type of the Manner mode at [Mode]. Press (Complete).
Setting the Stand-by Display <Stand-by disp.> Default Stand-by: Pattern, Ticker: Std Type: LTC/Clock, Font color: Blk, Clock style: 12h, Soft key: ON You can set the image for the stand-by display, the Telop display for i-Channel, Calendar/ Clock display, and whether to show or hide the guide display. From the Menu, select [Settings] →...
● Even if the Soft key is set to [OFF], you can operate the FOMA terminal normally. ● If you set an i-motion for the stand-by display, the playback starts in the case, such as when you open the...
Select an image from My picture of the Data Box at [Calling]. You can set the following files. Calling/V.phone calling img Category File format File size Image size My picture GIF/JPEG Max. 500K bytes Max. [VGA(640×480)] Flash Max. 100K bytes −...
Setting the Display for the Sub-display <Sub LCD> Default Stand-by: Pattern, Ticker: Std, Clock: ON, Adjust light: 3, Power saver: 15 sec You can set an image, i-Channel Telop text, and clock to be displayed in the sub-display. The display light brightness and time before starting the Power saver can be also set for the sub-display.
Setting the Display and Keypad Illumination <Backlight> Default Auto setting: ON, Adjust light: 3, Keypad light: ON Backlight always on: OFF (Charging・Internet)/ON (Videophone・Pict. Shoot・Movie shoot・Movie play), Illumination: ON You can set the main display brightness, ON/OFF of the keypad light, and whether to keep the main display light all the time.
Saving Power for the Display <Power saver> Default 1 min The display is automatically turned off to save battery power when no operations are made for a specific period. You can set the time before turning off the display. From the Menu, select [Settings] → [Display] → [Power saver] and press Select a time before starting the Power saver mode and press Select from [1min], [3min], [5min], [10min], [15min], and [30min].
Using the Menu Pattern <Menu pattern> Default Main body color “Black”: Sphere Black, Main body color “White”: Crisp White, Main body color “Lush Orange”: Ripple Orange, Main body color “Sonic Yellow”: Dot-line Yellow Using the Menu pattern, you can change the images for the stand-by display and sub- display, menu icons, and task icons all at once.
Informing Missed Call/New Mail with Indicator <Missed call> Default The incoming indicator can be set to flash about every five seconds to notify you that there is a missed call or unread mail/SMS/message. The indicator is turned off by checking the missed call or displaying mail/SMS/message. From the Menu, select [Settings] →...
Changing the Screen Display to English <Language> Default Japanese Menus, messages, and other displays can be displayed in either Japanese or English. From the Menu, select [設定] → [管理] → [バイリンガル] and press [Japanese] : Set the display language to Japanese. ハ゛イリンカ゛ル...
Security Settings ■ About Security Codes Security Codes Used on the FOMA Terminal ..............118 Changing the Security Code ............... <Change code> Setting the PIN Code ..................<UIM setting> Canceling the PIN Lock ....................... 121 ■ Restricting Operations and Functions Available on the Mobile Phone Various Locking Functions ....................
Security Codes Used on the FOMA Terminal Some functions provided for convenient use of the FOMA terminal require the security code to use them. Besides the Security code for operating the mobile phone, the network security code necessary for the network services, i-mode password, etc. are available.
[ON] : You need to enter the PIN1 code when the FOMA terminal is powered on. [OFF] : Do not need to enter the PIN1 code when the FOMA terminal is powered on. Enter a PIN1 code and press (OK).
Page 124
Changing the PIN1 Code/PIN2 Code Default Change PIN1 code・Change PIN2 code: 0000 To change the PIN1 code, set the PIN1 code setting to [ON]. Example: Changing the PIN1 code From the Menu, select [Settings] → [Management] → [UIM setting] and press The Security code screen appears.
Page 125
Description Lock all Prevent others from using the FOMA terminal (P.122). Omakase Lock Lock the FOMA terminal to prevent others from using it. For example, this service is useful when you lose or misplace the FOMA terminal (P.123). Self mode...
Page 126
● If there is an incoming PushTalk call when the Lock all is set, the FOMA terminal does not receive the call and the caller hears a busy tone. The call is saved in the Received record. When you cancel the Lock all, the notification icon “...
Page 127
Public mode (Driving mode) is set, you cannot receive a voice or videophone call. ● The Omakase Lock cannot be set if the FOMA terminal is outside of the service area, in the Self mode, or powered off. ●...
Page 128
● If you receive mail, Message R/F, or SMS when the PIM lock is set, the FOMA terminal does not perform the receiving operation and does not notify you of the reception. When you cancel the PIM lock, “ ”, “ ”, “ ”, “...
Page 129
Locking the Keypad to Prevent an Accidental Use <Lock key> While carrying around the folded FOMA terminal with the power on, the keypad can be locked to prevent from being accidentally pressed. Locking the Music Keys to Prevent an Accidental Use You can lock the Music keys in order to prevent them from being accidentally pressed while the FOMA terminal is folded.
Page 130
Own number, and Schedule as Secret if you do not want others to see them. Even if the Secret display is set to [ON], it is changed to [OFF] when you power off the FOMA terminal. From the Menu, select [Settings] → [Lock/Security] → [Secret display] and press The Security code screen appears.
Page 131
Protecting Mail from Unauthorized Access <Mail security> You can set the FOMA terminal not to display the received/sent/saved mail by folder. You can also use this function not to display the Receive/Send ranking and Sort inbox/outbox. To cancel this function temporarily, enter the Security code.
The Accept/Reject setting does not work even if you set it to a member other than the caller. When you make the Accept/Reject setting through the Group list, a call is accepted/rejected if the caller of it belongs to the specified group in the FOMA terminal phonebook. When the PIM lock is set, you cannot set the Accept/Reject calls.
Page 133
SMS and i-mode mail can be received regardless of this function. If you receive a call with no caller ID when the Denied no ID is [ON], the call is not connected. The missed call notification icon appears and the call is saved in the Received record. From the Menu, select [Settings] →...
Page 134
(hereinafter referred to as “stored data”) saved in the FOMA terminal at the Data Security Service Center. Even if you lose the stored data, for example, if you accidentally lost the FOMA terminal or it had a water-related trouble, you can restore the Phonebook and other stored data at the Center into a new FOMA terminal.
Page 135
Update the FOMA terminal software with latest SW Update P.324 upgrades using the packet communication. Protect the FOMA terminal from viruses by deleting Scan function P.328 data that could cause trouble and disabling the starting of application software.
Page 136
Camera Before Using the Camera ....................134 Recording Still Images ................<Shoot by photo> Recording Movies ..................<Movie shoot> Changing the Camera Settings ..................144 Adjusting the Camera during Recording ................147 Setting the Camera Operation ................... 149 <Bar code reader> Using the Bar Code Reader ..............
The Camera mode may not be activated when the FOMA terminal is charged electrostatically. Notes on Using the Camera To prevent shaking, hold the FOMA terminal firmly or place it on a stable place and use the Auto timer when recording.
Page 138
About Still Image/Movie Item Still image Movie File format JPEG (Exif format) MP4 (MobileMP4) File name When saved to [Data Box] When saved to [Data Box] YYYYMMDDhhmmss YYYYMMDDhhmmss The recorded year, month, date, hour, minute, The recorded year, month, date, hour, minute, second is displayed.
Page 139
About Recording Time of Movie The recording time of movie that can be saved in the Data Box, SubMemory, or External Memory varies depending on the recorded image quality, Shoot mode, image size, file size restriction settings as well as the recording conditions and object of shooting. ■...
Page 140
■ Estimated recording time of movie you can record and save in the External Memory (32MB) (h: hour, m: minute, s: second) Recording time available for each movie Total recording time available File size Shoot Image size Image quality Image quality restriction mode Super fine...
Page 141
Icons in the Camera Mode In the Camera mode display, the following icons appear depending on the settings and functions selected. You can use (Display) to switch the display of the icons and guide display (Standard, Simple, or Display off). Even if you select “Display off”, related icons are displayed when you perform any operations.
When you record an object under the following conditions, Auto Focus may not be able to adjust the focus of the object. - The object does not have color contrast. - You are recording while moving the FOMA terminal. - The object is moving. - There is a light within range of the camera view.
Page 143
Recording Images with the FOMA Terminal Folded You can use the sub-display as a finder to record images while the FOMA terminal is folded. Fold the FOMA terminal and press for over a second in the stand-by display. The Camera mode display appears.
Page 144
When the Shoot mode is set to [BestPic™], the Image stabilize and Auto save are temporarily set to [OFF]. When the Shoot mode is set to [BestPic™], you cannot record an image while the FOMA terminal is folded.
Press (Close). The Shoot mode is set to [BestPic™] and “ ” appears. Lock Auto focus Lock Auto focus Point the camera at the object and press The white-framed focusing window is used to adjust the focus. When the image comes into focus, the confirmation sound is heard, and the focusing window turns green. Press (Shoot).
Page 146
● If you fold the FOMA terminal while you are recording a movie with it open, the recording is stopped and the screen for confirming whether to save the movie appears. When the Auto save is set to [ON], the movie is saved automatically.
The recording end tone sounds, the recording is stopped, and the movie is automatically saved in the preset location. ● If you open the FOMA terminal while you are recording a movie with it folded, the recording is stopped and the movie is saved. Changing the Camera Settings...
Page 148
[to vertical] : Record a movie while holding the FOMA terminal in the landscape orientation. [to horizontal] : Record a movie while holding the FOMA terminal in the portrait orientation. Make sure that “ ” on the screen points upward.
Page 149
The Auto timer is set and “ ” appears. ● If there is an incoming call or you open or fold the FOMA terminal when you are recording with the Auto timer, the recording stops. ● After recording, the Auto timer is automatically reset to [OFF].
Adjusting the Camera during Recording Adjusting Brightness The image brightness (EV: Exposure Value) can be adjusted according to the ambient condition. The exposure can be adjusted in 13 levels from ‒2.0EV to +2.0EV for recording with the Out-camera and in seven levels from ‒1.0EV to +1.0EV for recording with the In-camera. Press (Func) in the Camera mode display, select [Adjust] →...
Page 151
Select a photometry mode and press The Photometry mode is set and the icon for the current photometry mode appears. Center Average Spot Adding a Picture Effect The images can be recorded with a special effect. When you record an image using the In-camera, you cannot select the [Negative art] and [Solarization]. (Func) in the Camera mode display, select [Adjust] →...
Restoring the Default Camera Settings You can reset the camera settings to the default settings. The camera settings listed below can be reset. Item Default setting Item Default setting Select scene AUTO ±0.0EV Zoom magnification ×1 Photometry Center Picture effect White balance AUTO Press...
Page 153
Selecting the Shoot Mode of Movie Default Image+Sound You can select the shoot mode of movie from three types. Press (Func) in the Camera mode display, select [Shoot] → [Switch mode] → [Movie shoot], and press The display switches to the Movie shoot display. Press (Func), select [Set] →...
Page 154
The shutter sound volume is fixed and cannot be adjusted or muted. The shutter sound is heard even if the Manner mode is set. Press (Func) in the Camera mode display, select [Set] → [Shutter sound], and press The menu for selecting a shutter sound appears. Select a shutter sound and press The Shutter sound is set.
Page 155
(Save) on the screen for confirming whether to save the image if you want to save it. Select [ON]/[OFF] and press The image save method is set. ● When images are recorded while the FOMA terminal is folded, they are saved automatically, regardless of the Auto save ON/OFF setting. Camera...
The FOMA terminal may not be able to scan JAN or QR code if it is scratched, smudged, damaged, of poor print quality, too small in size, or in certain light reflection conditions. It also may not be able to scan some QR code versions.
Page 157
Function menu, select [Add to phonebook] → [Yes] and save the scanned data in the Phonebook. Follow the same steps as in the Add to FOMA terminal phonebook (P.87, step 3 to 4) or Add to UIM phonebook (P.89, step 3 to 4).
Page 158
i-mode/i-motion/i-Channel ※ i-mode is a paid service that requires a subscription. What is i-mode? ......................... 156 Displaying the i-mode Menu ................. <i-mode menu> ■ Displaying a Site Displaying Sites ........................156 Using Sites ......................... 157 Saving a Site in My Menu ................. <My Menu>...
UIM for the stand-by display, ring tone, and/or other DCMX(ケータイクレシ゛ット) applications, those settings are reset to the initial settings if おサイフケータイ モーション/Vライフ゛(動画) the UIM is switched to another card or the FOMA terminal 天気/ニュース/ヒ゛シ゛ネス is powered on without inserting a UIM. モバイルバンキング 証券/カート゛/マネー/保険...
Press (Cnct). Check box Select one or more items. “ ” of the The FOMA terminal is connected to the site displayed last. selected items changes to “ ”. To cancel the selection, select the check Displaying SSL Site box again.
Page 161
To mute the sound effect, set the Sound effect to Displaying a Site URL [OFF]. ● If you do not operate the FOMA terminal for more than The URL of the currently displayed site can be about 30 seconds while the Flash movie is played back, displayed.
Page 162
password to subscribe and unsubscribe Press (Cnct). sites and set to your The FOMA terminal is connected to the site of the selected options. URL. Enter the current i-mode password at [Current Password]. The password is masked by “ ”. Enter the new password at [New Password].
Page 163
Select a folder and press Select a bookmark and press (Cnct). The selected bookmark is moved to the different folder. The FOMA terminal is connected to the site of the selected bookmark. To check the URL Move the cursor to the bookmark and press (Check).
Deleting a Bookmark Displaying a Screen Memo You can delete bookmarks using four methods. Saved screen memos can be displayed. The following icons show the status of the screen memo. Example: Deleting a bookmark Normal screen memo From the i-mode menu, select [Bookmark] and Protected screen memo press To delete all bookmarks...
Page 165
[Data Box]: The screen informing insufficient memory or that the Save melodies in the Data Box of the FOMA terminal. maximum number has been reached appears. To save Select a folder for saving melodies. the new graphic, select [Slct delete file] → a folder → a...
Page 166
Accessing a Site from the Current Display You can connect to a site from a URL currently displayed in the display (Web To). Select a link (URL) in the display and press The FOMA terminal is connected to the linked site. i-mode/i-motion/i-Channel Continued...
Page 167
Changing the i-mode Host Setting Whether to Use the Saved Data (ISP Connection Communication) for Flash Movies Default i-mode(UIM) Default Yes You can set whether to use the saved data (P.158) ※ You do not need to change the Host setting when when you play back a Flash movie displayed on a site using the i-mode service of DoCoMo.
New messages held at the i-mode center while the appears (sometimes “ ” and “ ” do not appear even if FOMA terminal is powered off or outside of the i-mode messages are held at the i-mode center). service area can be checked.
Page 169
Protecting a Message Displaying a Message <Message R/Message F> Message R or Message F can be protected from being The list of received messages can be displayed. overwritten. From the i-mode menu, select [MessageR/F] → An unread message cannot be protected. [MessageR]/[MessageF] and press Example: Protecting Message R MessageR 1/8...
Page 170
The user certificate certifies that you are a FOMA required to connect to an SSL site. subscriber. The downloaded user certificate is saved on the green UIM (FOMA card) and enables you to use From the i-mode menu, select [i-mode setting] → FirstPass-compatible sites.
Page 171
From the i-mode menu, select [i-mode setting] → FOMA terminal as well as for Internet communication by connecting the FOMA terminal to a PC. To use on a PC, [Select host] and press you must install the FirstPass PC software on the supplied Select host...
Page 172
Select [File property]. tracks. You can play back an i-motion on the FOMA When a link is set in the Telop text When you stop or pause playback, a confirmation terminal and set a saved i-motion for the stand-by display.
Page 173
There are two types of channels: “Basic channel” and What is i-Channel? “Favorite channel”. “Basic channel” is provided by DoCoMo and is pre-registered, and therefore you can The i-Channel service provided by DoCoMo or use it from the moment you start using the i-Channel another IP (information service providers) distributes service.
Page 174
(P.164). Normally, you do not need to change the host. ● When the FOMA terminal is powered off, outside of the service area, or in poor radio wave condition, you may not be able to receive information. When you receive information by pressing (i.ch), the Telop text is...
Page 175
Changing the i-Channel Settings Setting the Telop Text Default Std You can set the display speed of the Telop text and also turn off the Telop text. From the i-mode menu, select [i-Channel] → [Ticker] and press The Ticker display appears. [Stand-by]: Set the Telop text of the stand-by display used for the main display.
Page 176
Playing Back/Saving a File Attachment Received in i-mode Mail ........183 ■ Manipulating the Mail Box Displaying Received/Sent/Saved Mail ................184 ■ Setting Mail Setting the Mail Function of the FOMA Terminal ..........<Mail setting> ■ Using SMS (Short Message Service) Composing and Sending SMS (Short Message Service) ...
Page 177
You can use i-mode mail or SMS to send a message [Confirm Mail Address] from a FOMA terminal to an i-mode terminal for the Users of i-mode terminals (including Mova) need to enter only Mova service. The i-mode terminal for the Mova service the mail address portion before the @ mark to exchange mail.
Page 178
SMS】 , 【Reject international SMS】 , 【Reject user unset SMS received selectively regardless of their size using the and international SMS】 . You can also check the current Attached file pref. function provided on the FOMA setting. terminal. When you use a mobile phone of other ...
If Unable to Receive SMS (Short Message Service) The SMS received at the SMS center is immediately Composing and Sending sent to the FOMA terminal. When the FOMA terminal is powered off or cannot receive radio waves because i-mode Mail <Compose and send mail>...
Page 180
Enter a subject at [ Entering an Address from the Mail List Enter a subject within 15 full-width or 30 half-width characters. You can send mail to several recipients saved in the mail list. Enter the main body at [ Enter the main body within 5,000 full-width or 10,000 half- Press (Func) in the Edit mail display.
Page 181
Enter/decorate the main body at [ ● Even if you delete a decorated character, the data used for decoration may not be erased and the number of Enter the main body within 5,000 full-width or 10,000 half- characters in the mail main body that you can enter could width characters.
Page 182
When you select [Background color] Select the font/background color and press to select the background Input to select the font color and to select the color. background color. If you do not set the font/background color, press Input Sample Background color Background color [none] Enter the main body.
Files that cannot be attached to mail and files prohibited from types or size exceeding the capacity, the file attachments being retrieved out of the FOMA terminal cannot be attached. are deleted and only the mail main body is sent to the recipient.
Page 184
To edit saved mail - When the FOMA terminal is powered off From the Mail menu, select [Draft] → [Draft] → mail. - When the FOMA terminal is outside of the i-mode service area - During PushTalk communication Receiving i-mode Mail <Auto receive>...
Page 185
<Check new messages> Compose mail and send it. New mail held at the i-mode center while the FOMA Follow the same steps as in the Compose and send mail (P.176, step 2 to 5). terminal is powered off or outside of the i-mode service The mail is forwarded and “...
Page 186
Save other items. Example: Saving the mail address of a received mail sender to Follow the same steps as in the Add to FOMA terminal the FOMA terminal phonebook as a new entry phonebook (P.87, step 3) or in the Add to UIM phonebook (P.89, step 3).
Page 187
If you obtain a file attachment not yet existing when there exist already 1,000 received mails or there is no more free memory space in the FOMA terminal, the obtained data overwrites the unprotected read mail from the oldest one. Depending on the size of the file attachment to be obtained, multiple mails may be overwritten by it.
Page 188
Select a folder and press File attachment type The received/sent/saved mail list appears. With image attachment Received mail With movie attachment Inbox 1/25 Received date/time With melody attachment Sender 15:51 ドコモ一郎 With ToruCa card attachment Photo contest Subject 12:34 ドコモ二郎 With i-αppli To Concert ticket next With PDF data attachment 12/13 携帯なつ子...
Page 189
Example: Adding a folder for received mail Storing the Mail at the Data Security From the Mail menu, select [Inbox], press , and Service Center press (Func). The Function menu appears. You can use the Data Security Service to store up to 10 i-mode mails or SMS messages at one time at the Data Select [Edit folder] →...
Protecting Mail Displaying i-αppli Mail as Regular Mail Received or sent mail can be protected from being i-αppli mail can be displayed as regular mail. If after overwritten. Up to 500 received mails and 250 sent the i-αppli with mail software is deleted, mail saved in mails can be protected.
Page 191
Sorting Mail Setting the Mail Function of the FOMA Terminal Received or sent mail in a folder can be sorted for <Mail setting> display temporarily. Assigning Separate Folders for Mail Example: Sorting received mail Press (Func) in the received mail list.
Page 192
The Edit signature display appears. Sent mail is held at the i-mode center and not received If you have saved a signature before, it is displayed. by the FOMA terminal. To receive, use the Receive option (P.181). Press (Edit) and enter a signature.
Page 193
Default Prefer alarm You can set whether the incoming mail or received mail display should appear when you receive mail, SMS, or Message R/F while you are using the FOMA terminal for other tasks. To delete a member From the Mail menu, select [Mail setting] →...
<Compose and send SMS> Default Valid Regardless of whether you subscribe to i-mode, you You can set whether to automatically receive the file can send/receive text messages between FOMA attached to i-mode mail. terminals. You can exchange SMS with recipients/senders who From the Mail menu, select [Mail setting] →...
Page 195
<Check new SMS> When “ ” or “#” is included in the address entered at [Address], select [Unknown]. New SMS held at the SMS center while the FOMA [Address]: terminal is powered off or outside of the service area When you select [Others] at [SMSC], enter an address.
Page 196
i- α ppli What is i-αppli? ......................... 194 Downloading i-αppli from a Site ..................195 Running i-αppli ....................<Run i-αppli> Running i-αppli Automatically ................<Auto start> Setting i-αppli for the Stand-by Display ..........<i-αppli stand-by> Managing i-αppli ....................... 202 <i-αppli(miniSD)> Displaying i-αppli Data in miniSD Memory Card ........
- Save ring tone Some software may use the serial number of the mobile - Change ring tone (call, videophone call, mail, message) phone/UIM (FOMA card) of the i-mode terminal. - Obtain picture from Data Box - Save picture in Data Box ...
You can save up to 100 i-αppli software, each software location and letting the FOMA terminal to navigate you maximum 1M bytes. The number of i-αppli software that can to the destination by enabling to show your real-time be saved may decrease depending on the data to be saved.
Since the “serial number of your mobile The i-αppli folder list appears. phone/UIM (FOMA card)” is sent to IP (information service The following icons show the type of folder. providers) via the Internet, it might be accessed by a third (Yellow) Preset folder party.
Page 200
[Stand-by NW setting]: software with camera interface, obtained using the Set whether the FOMA terminal should connect to the infrared communication function of i-αppli software, network when you set an i-αppli software that uses obtained from sites or Internet home pages using network communication as the stand-by display.
Page 201
Terms of Use. An additional packet communication charge is required for using this function. When you use the FOMA terminal overseas, set its date/time to Japan time. For details, see the “Mobile Phone User’s Guide 【i-mode】 ”.
Page 202
キャラクタ” (illustrations and characters) and easily save them in the FOMA terminal. You can also save multiple Deco-mail pictographs at a time. Once you find a Deco-mail pictograph of Changing...
Page 203
You can use audio navigation for walking for a spot in the neighborhood. You will find this feature highly and trains using the GPS function of SO903i. useful when you want to search for a nearby convenience store or restaurant in an unfamiliar town.
The Auto start is set. Default Yes ● The Auto start does not operate in the following cases. - When the FOMA terminal is powered off You can set whether to star t i-αppli software - During a call/communication automatically on the FOMA terminal.
When you cancel the Lock all or started. PIM lock, the i-αppli stand-by display reappears. ● When the FOMA terminal is connected to the network for ● The Web To cannot be used from the i-αppli stand-by software upgrade, the packet communication charge is display.
Page 206
Moving i-αppli to a Different Folder Checking Error History and Trace Result You can move software to a different folder using three methods. The error histories for the i-αppli stand-by display and the results output by the i-αppli trace feature can be Example: Moving a software displayed.
You can use the infrared communication (P.240) from You can display i-αppli data saved in the miniSD the software running on the FOMA terminal. memory card, using a folder name. There are some data that cannot be exchanged even if the other device is equipped with the infrared communication From the Menu, select [i-appli] →...
Page 208
Osaifu-Keitai/ToruCa What is Osaifu-Keitai? ......................206 What is the iC transfer service? ..................206 Starting an Osaifu-Keitai-compatible i-αppli ..............206 What is ToruCa? ......................... 207 Obtaining a ToruCa Card ..............<Obtain a ToruCa card> Displaying a ToruCa Card ................. <Display ToruCa> Managing ToruCa Cards ....................
※ A device used for reading and writing an IC card. transfer service. ※3 The FOMA terminal to be replaced must be an Osaifu-Keitai IP (information Reading device supporting the iC transfer service (903i series).
● Even if the FOMA terminal is powered off, you can use the Osaifu-Keitai by holding up and showing the FeliCa mark Mail to a reading device (reader/writer). You cannot use it if the QR code battery pack is not attached.
When you obtain a ToruCa card Select [詳細] (Detail) → [Yes] and press from a reading device (reader/ writer), the FeliCa Sign flashes in green, a beep sounds to notify you that the card has been obtained, the ToruCa card is displayed, and the previous display reappears after about 15 seconds.
Example: Moving a ToruCa card ● When you sort ToruCa cards using [Index], the order of sorting may not follow the Japanese alphabetical order if From the ToruCa folder list, select a folder and both full-width and half-width characters are used. press To move all ToruCa cards in the folder From the Function menu, select [Move] →...
Security code, and press (OK). Default ON You can set the FOMA terminal to check if the Locking the IC Card Function When ToruCa(detail) card you are trying to obtain has been the FOMA Terminal Is Powered Off obtained already when you obtain the card from a reading device (reader/writer).
GPS Function What is GPS? ........................212 <Position location> Checking Your Location ................Using the GPS-compatible i-αppli ................. <i appli> Providing Your Current Location Information upon Request ....<Location provision> Notifying Your Current Location Information ..........<Location notice> Displaying the History of Location Positioning ......... <Location history>...
Page 215
● Saving the location information in the Phonebook (P .217) Select [Add to phonebook] → [New]/[Add]. You can save the location information that you obtained Follow the same steps as in the Add to FOMA terminal in the Phonebook and use it. phonebook (P.87, step 3 to 4).
Page 216
You can use audio navigation for walking and trains using the GPS function of SO903i. You can use all NAVITIME functions of SO free of charge for Select [一発ルート検索(GPS)] and press 90 days after you use it for the first time.
Page 217
You can provide your current location information when ● If there is a request for your location information when the Public mode (Driving mode) is set, the FOMA terminal there is a request from another party. operates as follows. Before using the Location provision, set the Location request - When the settings for using each service is set to “許...
From the Menu, select [LifeKit] → [GPS] → [Notify/ Provide menu] → [Loc. request menu] → [Service settings] and press The FOMA terminal is connected to the GPS service The Location request is set. If you set [ON], “ ” appears. settings site.
Page 219
[Add to phonebook] → [Main memory]/ [UIM]. To delete a location history record Follow the same steps as in the Add to FOMA terminal Move the cursor to the location history record and from phonebook (P.87, step 3 to 4) or in the Add to UIM the Function menu, select [Delete] →...
Page 220
” in the Edit FOMA terminal phonebook information is entered in the mail main body. display. To display location information details When you add the location information to the FOMA Select [Location detail]. terminal phonebook, you cannot select [From phonebook].
Page 221
The obtained location information may deviate by 300 m or more under the above conditions. When the FOMA terminal is outside of the service area (or it is overseas), the GPS function is not available. There are about 24 GPS satellites in orbit at an altitude of about 20,000 km, and each satellite takes about 12 hours to travel around the earth.
Page 222
Folder Setup of the External Memory/SubMemory ............228 Data That Can Be Written/Read to and from the External Memory/SubMemory ....231 Saving Data from the FOMA Terminal to the External Memory/SubMemory ..... 231 Saving Data from the External Memory/SubMemory to the FOMA Terminal ..... 231 Managing the External Memory/SubMemory ..............
Image stabilize function is set to [AUTO]. The Function menu appears. “ ” appears on the upper right of the icon for images prohibited from being retrieved out of the FOMA terminal. Select [Slideshow] and press To display the saved date/time Slideshow...
432)], and [CIF(352×288)]. The style and color of the You cannot edit preinstalled images or images prohibited text can also be specified. from being retrieved out of the FOMA terminal. Some images may not be edited. Example: Adding text and saving by overwriting ...
Page 225
You cannot store a file that contains an image larger than 100K bytes and a still image that is prohibited from being to select the area to be trimmed retrieved out of the FOMA terminal. and press (OK). Press (Func) in the file list of My picture.
To ● If you leave the FOMA terminal without a battery pack or stop the playback, press (Stop). with a fully expended battery pack for a long period of...
Editing Movies <Edit movie> press You can edit a movie recorded with the FOMA terminal. Some movies may not be edited. Clipping a Still Image from a Movie You can specify any portion of a movie and clip it as a still image.
Displaying and Operating Chara-den What is Chara-den? <Chara-den> You can display Chara-den characters saved in the You can send an avatar of your choice instead of your Chara-den folder of the Data Box. own image when you use the videophone function. You can make this avatar move by pressing the keys on the Press ) in the stand-by display, select...
RingRock The External Memory formatted on a PC or other devices cannot be used on the FOMA terminal. Be sure to use the External Memory after formatting it using the FOMA terminal (P.232). Inserting and Removing the External Memory ■...
SubMemory as well as the data in the SubMemory to the FOMA terminal. The SubMemory can be also used as an external drive of a PC by connecting the FOMA terminal to the Open the slot cover. PC, allowing you to read and write data from/to the SubMemory (P.233).
When you save a Phonebook entry, text memo, schedule, mail, bookmark, and a ToruCa card from the External Memory to the FOMA terminal, they are saved as a file formatted for the External Memory. Multiple data records of above categories may be contained in a file of the External Memory.
Page 232
If you edit data in the SubMemory/“Memory Stick Duo”, a file with the file name “$SO903i” may be created. If there is a file with the same name in the same folder, the older file is overwritten.
Page 233
■ miniSD memory card FOMA terminal Estimated max. number of Category FOMA terminal folder File format filename files to be saved (32MB) DCIM − − − − 100SODCF∼999SODCF My picture/Camera JPEG(Exif), GIF DSC0nnnn.JPG/.GIF P.135 SD_VIDEO − − − − PRLxxx i-motion/Distrib.
You cannot save the SMS and using i-mode and data communication, because the report. FOMA terminal is placed in the same condition as outside of Bookmark ○ × ○...
Example: Saving the data by adding to the existing data ● Do not format the External Memory/SubMemory using a PC, etc. Make sure to format it on the FOMA terminal. From the External Memory/SubMemory category list, select a category and press...
SubMemory and External Memory respectively. ● If the FOMA terminal is not connected to a PC correctly or the battery level is very low or 0, not only data cannot be sent/received, but also it may be lost in some cases.
Melody i-mode Melodies obtained from a site, If a group with the same name exists in the FOMA terminal i-mode mail, or i-αppli phonebook, data is saved in it and if not, data is saved in Preinstall...
Page 238
Data obtained from sites, i-mode mail, or i-αppli External Memory (currently used) Data recorded using the camera of the FOMA terminal Select [My picture] and press Data scanned by a bar code reader, data moved/copied from the External Memory/ My picture...
[Size]: To move data from the External Memory/SubMemory to the Sort data in decreasing order of file size, the largest file FOMA terminal first. Move the cursor to the data and from the Function menu, select [Move to main] → [Move one]. To move several [Originated(icon)]: data, select [Move to main] →...
Page 240
“.” at the beginning of a file name. Select [Yes]/[No] at [Restriction]. [Yes]: Set file restriction. Once you send the file as a mail attachment, it cannot be sent or forwarded from the recipient’s FOMA terminal. [No]: Do not set file restriction. Press (Complete).
Page 241
Even if “◎: Can be edited” is indicated for an item in the above table, you may not be able to change some of the data. Detailed information of data saved in the External Memory/SubMemory may be different from the information displayed on the FOMA terminal.
<Movable contents> <Storage information> You can encrypt and move a copyrighted image, You can display the memory use status of the FOMA ® i-motion, melody, PDF data, and Chaku-Uta Full terminal. You can also check the volume used up by downloaded from a site to the miniSD memory card.
Shortage 64KB data communication. Using the Infrared Communication Select a folder → software and press The FOMA terminal and the other device can be used within ソフト一覧 1/12 ソフト一覧 1/12 about 20 cm apart. The infrared data port must be kept XXX game...
When you send/receive bookmark or mail data, the folder allocation setting may not be applied depending on the terminal model of a caller/recipient. You cannot send/receive a file prohibited from being retrieved out of the FOMA terminal. ※1 Saved in a memory space with the smallest vacant memory number.
PushTalk phonebook appears. If you select [Yes], the Sending All Data data is saved in both the PushTalk and FOMA terminal phonebooks. If you select [No], the data is saved in the It is necessary that you and the receiver determine the 4-digit FOMA terminal phonebook only.
Save received data by adding to the existing data. During the iC communication, the status of the FOMA terminal is [Overwrite]: the same as the outside of the service area status. Therefore, you The screen for confirming whether to overwrite the cannot place a call or perform i-mode and data communication.
Data Box, SubMemory, or External Memory. You can also Select data to be sent and press (Func). download PDF-compatible data from a site to the FOMA terminal and display/save it. The Function menu appears. It may take time to display some PDF data. Note also that...
Page 248
Operating method Searching a Character String of PDF Data Operation Key operation Display the data in original Press (Fit/Tr img). Press (Search) in the PDF data display. size or by adjusting the page width to the display size Search criteria Search text Scroll Zoom in Press...
Page 249
The i bookmark is added. ● The i bookmarks/marks that you have added may be deleted if you attempt to copy them to a PC or other FOMA terminals using infrared/iC communication or the External Memory. Displaying the i Bookmark/Mark List...
Playing Music ■ Listening to Music What is MUSIC Player? ....................... 248 Transferring Music Data ...................... 248 ® Downloading Chaku-Uta Full ..................... 250 Playing Back Music Data ..................... 251 Managing the Playlist ......................253 Changing the MUSIC Player Settings ................. 254...
PC to the FOMA terminal. For more playing back the music data. information, see the Help of SonicStage. ■ Music data that can be played back To transfer music data to SO903i, install SonicStage from the Data Box supplied CD-ROM. Files that can...
Page 252
When you set the supplied CD-ROM in your PC and if the checked with “ ”. “FOMA SO903i CD-ROM” window does not appear, click [スタート] → [ファイル名を指定して実行], enter “CD- When there are tracks you do not want to record ROMドライブ名¥SonicStage¥SetupSS.exe” at “名前”, and Click “...
Connect the FOMA terminal to a PC and set the Save data in MUSIC of the Data Box. FOMA terminal to the Memory mode. [SubMemory]: Follow the same steps as in the Using the FOMA Terminal Cannot select this item. with a PC (P.233). [External Memory]: Save data in [Movable contents] of MUSIC in the miniSD Move the pointer to [音楽を転送する] and click [携...
[Saved areas]: Do not insert/remove the External Memory into/from the FOMA Select a place to save to and select the music data. terminal during playback on the MUSIC Player. The playback is interrupted.
Page 255
List Playing Back Music Data with the Default Jacket display FOMA Terminal Folded You can select how to display the music data list from two types. Example: Playing back music data by selecting the artist ...
Original playlist playlist, the files of the music data are not deleted. The playlist is created on the FOMA terminal. You can create or edit up to 10 playlists and save up to 36 tracks of music data Example: Deleting one track per file.
→ [Yes] and enter the Security code. VPT(Surround) OFF Dynamic Normalizer OFF When the FOMA terminal is folded Press (OPTION) in the Music menu, use select [Music settings], set each item, and press Select a playback mode for music data at [Play mode].
Page 258
Other Useful Functions <Multiaccess> Multiaccess Feature ..................Multitask Feature ....................<Multitask> Using the Lifetime Calendar ..............<Lifetime Calendar> Starting the Alarm at a Specified Time ..............<Alarm> Saving Schedules ..................... <Schedule> <My Selection> Performing Frequently Used Functions Quickly ........... <Voice memo> Recording Recipient’s or Your Own Voice .............
Placing a Voice Call during i-mode/Packet Multiaccess Feature <Multiaccess> Communication Multiaccess is a function that enables you to use a Example: Placing a voice call during i-mode voice call, packet communication, and SMS functions Press (MENU) dur ing i-mode or packet at the same time.
Page 260
■ Task icons Activating a New Function Icon Function name Icon Function name Press (MENU) during the activation of a Stand-by Mail setting function. Phone i-mode Phone number entry PushTalk i-Channel Dial PushTalk My Selection i-αppli MUSIC Player Own number Display MUSIC folder Phonebook Lifetime Calendar...
● When you have more still images, mail, and schedule Sent mail (All)/(Selected)/(OFF) data saved in the FOMA terminal, you can build a more Schedule (All)/(OFF) interesting Lifetime Calendar. We recommend saving data in the FOMA terminal using infrared communication and...
- Received and sent mail saved in the FOMA terminal Calendar and set whether to automatically display the - Schedule saved in the FOMA terminal - Name, Des call display, and birthday saved in the FOMA items to remember. terminal phonebook...
Page 263
Select an alarm tone from MUSIC/i-motion/Melody Starting the Alarm at a of the Data Box at [Alarm]. Specified Time <Alarm> You can set the following files. File Category File size Image size Default Select alarm・Auto power on: OFF, format Time: 00:00, Repeat: OFF, MUSIC AAC-LC/...
Page 264
Select [ON]/[OFF] at [Auto power on]. Select a starting date and press (Create). [ON]: Edit schedule When the alarm time comes during power off, the FOMA 2006/12/01 Fri terminal is automatically powered on and the alarm 00:00 All day OFF sounds. 2006/12/01 Fri [OFF]: 00:00...
Page 265
● If you leave the FOMA terminal with the battery pack vibrates using [Pattern1]. removed or fully expended for a long period of time, the [OFF]: date and time is reset, and the Schedule alarm may not Do not set the vibrator.
Page 266
Select an indicator color at [Color]. Deleting a Schedule Select from 12 indicator colors or [C13:ALL] (indicator flashes in 12 colors in sequence). You can delete schedules using the following five When you move the cursor, the indicator flashes methods. accordingly.
Page 267
Note that the Vernal Equinox Day and Autumn Equinox Day Press (i.ch) for over a second in the stand-by display may fall on the dates other than those set on the FOMA and from the Function menu, select [Reset] → [Yes]. terminal because they depend on the announcement by...
Page 268
99 hours, 59 minutes, and 59 ● When the FOMA terminal is folded while recording a voice seconds or the total call duration for voice calls or digital memo during a call, the recording is stopped and the...
Page 269
Resetting the Total Call Duration and Setting the Limit for Alert on Charge the Total Call Charge <Cost limit notice> The display of the total call duration and charge can be Default Set: OFF, Limit: –, Notification: Alarm+Stand-by reset. The count starts from 0 after the reset. You can set an upper limit amount of call charges to Example: Resetting the total call duration alert yourself with an icon or alarm tone when the total...
Using the Calculator None <Calculator> Enter a memo at [Contents]. You can use the FOMA terminal to perform the four basic operations of arithmetic (+, −, ×, ÷) for up to Enter a memo within 256 full-width or 512 half-width characters.
Page 271
● Do not wind the cord of the Earphone Mic around the Displaying the Settings of FOMA terminal. Doing so may cause the radio wave condition to be degraded. Various Functions <Application> ● Placing the cord of the Earphone Mic close to the antenna may cause noise.
Use the switch on the Earphone Mic to place a voice call Disconnect the Stereo Earphone Set (free sample product) or answer a voice, videophone, or PushTalk call. from the FOMA terminal or set the Earphone mic to [Valid [OFF]: main] and talk using the FOMA terminal microphone.
List of Reset Items The items in which settings, that are made through the associated Function menus, etc., are reset by executing the Reset settings or Reset all data&set are as follows. For functions that can be accessed through the menu display, see the list of menus (P.294).
This manual provides a brief description of each network service using the approach of operating from the menu of the FOMA terminal. For detailed information on operation of the network services, see the “Mobile Phone User’s Guide 【Network services】 ”.
Missed Activate Notify you of a new message by SMS when Call it is received while the FOMA terminal is The Voice Mail Service takes messages for you, as notice powered off or outside of the service area. long as it answers a call with the answering message, Select [Missed Call notice] →...
When you receive a videophone call from a caller who is you are in a location without the radio wave, the FOMA saved as a nuisance caller, it is disconnected after playing terminal is powered off, or you do not answer the call back the call rejection video guidance on the caller’s phone.
Set the guidance in the order of English → Japanese. required. To check the settings You cannot use the FOMA and Mova terminals at the same From the Menu, select [NW Services] → [English time. Guidance] → [Check setting].
The Multi Number Service enables you to add up to two numbers, Additional No.1 and Additional No.2 in Default Answer addition to the Basic Number, as your FOMA terminal phone numbers. If you are subscribing to the Voice Mail, Call Forwarding,...
● If you do not yet subscribe to the Multi Number Service, Saving a New Service to Use It use the FOMA terminal with the Multi Number call set to [OFF]. <Additional service (USSD) registration> ● If the Multi Number call is set to Calling...
Data Communication For detailed information on Data Communication, see the “Manual for Data Communication” (PDF format) included in the supplied CD-ROM. You need Adobe Reader (Version 6.0 or later is recommended) to read the “Manual for Data Communication” (PDF format). If Adobe Reader is not installed on your PC, install it from the same CD-ROM, which also contains the Adobe Reader software.
Page 281
Precautions on Use About Data Communication You can use the FOMA terminal for three types of data Usage Fee of Internet Service Provider communication, packet communication, 64K data When you use the Internet, a usage fee is required for communication, and data transfer.
Page 282
(APN) in the FOMA terminal. You can save up to 10 numbers from one to 10 for the FOMA terminal. wave condition is poor. Default cid of the FOMA terminal...
Page 283
For the operation procedure after installing the software, see the Help of the software. A FOMA USB connection cable (optional) is required to use the DoCoMo keitai datalink software. Set ON/OFF for the Notify caller ID.
Page 284
Entering Text For kuten codes, see the “Kuten Code List” (PDF format) included in the supplied CD-ROM. You need Adobe Reader (Version 6.0 or later is recommended) to read the “Kuten Code List” (PDF format). If Adobe Reader is not installed on your PC, install it from the same CD-ROM, which also contains the Adobe Reader software.
■ Entering a character assigned to the same key twice About Entering Text or more in succession After entering the first character, move the cursor. The overview of the text entry is described here. Characters including JIS level 1 and level 2, 6,355 kanji are ■...
Page 286
The matching words list closes and “健闘” is finalized. words list. This is a conversion mode that a look-ahead strategy is applied to by the FOMA terminal. ● The selected words from the matching words list are [User conversion]: displayed with priority over other words next time.
Press (OK). Entering Common Phrases The selected pictographs are entered all at once. For common phrases, see P.308. ● Deco mail Pict. can be entered only in the Edit mail and Common phrases that are available vary depending on the Edit signature displays.
You can enter characters, numbers and symbols using or cutting next data to it. corresponding 4-digit kuten codes as listed in the The characters in the clipboard are deleted when the FOMA Kuten code list. terminal is powered off.
The Prediction dictionary display appears. Up to 20 dictionaries can be downloaded using i-mode To add a word to the User dictionary for use with the FOMA terminal. When enabling a Select [Settings] → [Application] → [Input method] → [Edit user dict].
Page 290
Overseas Overview of International Roaming (WORLD WING) ............288 Services Available Overseas ....................288 Before Using the FOMA Terminal Overseas ..............289 Placing a Call from Your Overseas Location ..............290 Receiving a Call ......................... 290 Setting the Carrier Search Method ..........
DoCoMo’s “International service website”. and other countries as well as ordinary calls ※1 The FOMA terminal can be used only in 3G roaming areas. in your country of stay. You cannot use the FOMA terminal in GSM/GPRS service...
Page 292
(P.62) display. You can also set the FOMA terminal not to display the name of the carrier (P.291). Before Using the FOMA To display the current date/time of the location of stay on the...
If the Network search mode is set to [Manual], manually ※ The videophone image displayed on the FOMA terminal switch to the FOMA network (JP DoCoMo) or change the may be distorted or the videophone call may not be setting to [Auto].
Page 294
(MCC) and network number (MNC), The roaming guidance service is activated. press (Complete), and select [Yes]. To save the carrier being connected From the Function menu, select [VPLMN to PLMN] → [Yes]. Using the FOMA Terminal Overseas...
Page 295
Overseas Location An international call charge applies in the country where you use the service when you operate the FOMA terminal overseas. This feature is not available as of November 2006. From the Menu, select [NW Services] → [Int’l Operating the Voice Mail Service from roaming] →...
Page 296
Face Marks ......................... 307 Common Phrases ......................308 Multiaccess Combinations ....................309 Multitask Combinations ...................... 310 Services Available on the FOMA Terminal ................. 311 Optional and Related devices .................... 312 ■ External Device Interface Introduction of Movie Player Software ................312 ■...
List of Menus You can enter the figure next to some menu names listed below in the menu display to execute the associated function. ■ Normal mode ○: The default setting/s is/are restored. ●: Items deleted Reset Reset all Menu Default Setting Page...
Page 298
Reset Reset all Menu Default Setting Page settings data&set i-mode i Menu − P.156 Bookmark − ● P.160 Screen Memo − ● P.161 Go to Enter URL − ● P.159 location URL list − ● P.159 Last accessed URL − ●...
Page 299
Reset Reset all Menu Default Setting Page settings data&set LifeKit GPS [61] i appli − P.213 Location history − ● P.216 Sound/ Position location Volume: OFF, Vibrator: OFF, ○ ○ Color setting Color: ON Location notice Volume: 3, Vibrator: OFF, ○...
Page 300
Reset Reset all Menu Default Setting Page settings data&set Settings Display Menu pattern Main body color “Black”: Sphere Black, Main body color “White”: Crisp White, M a i n b o d y c o l o r “ L u s h ○...
Page 301
Reset Reset all Menu Default Setting Page settings data&set Settings Call Earphone Auto answer Set: OFF, To answer: 5sec ○ ○ P.269 Earphone Earph.+speaker ○ ○ P.105 Earphone SW Set: OFF, Memory number: 999 ○ ○ P.268 Earphone mic Valid earphone ○...
Page 302
Reset Reset all Menu Default Setting Page settings data&set Settings Lock/ Acpt/Rjct call ○ ○ Security Phone No. − ● P.128 Group list − ● Reject unknown ○ ○ P.131 Denied no ID User Unset ○ ○ PublicPhone ○ ○ P.129 Not supported ○...
Page 303
Reset Reset all Menu Default Setting Page settings data&set NW Services Call Activate − Forwarding Deactivate − Change FWD number − P.273 If FWD number busy − Check setting − Register Caller − Nuisance Reg. selected No. − Calls Delete all entries −...
Preinstalled Data ■ My picture ● Preinstalled Black Main White Main Lush Orange Main Sonic Yellow Main Buildings Flowers Canyon Neon Urban Stage Street Corner 音声発着信中 テレビ電話発着信中 テレビ電話 (代替) テレビ電話動作中 パケット通信 メール受信完了 Black Sub White Sub Lush Orange Sub Sonic Yellow Sub ●...
Special Symbols Symbols marked with ■ may not be displayed correctly when sending to i-mode non-compatible mobile phones or PCs. ■ Full-width symbols ■ Half-width symbols Pictographs Pictographs may not be displayed correctly when sending to i-mode non-compatible mobile phones or PCs. ...
Face Marks When you enter the following words in the kanji/hiragana mode, Kao moji (face marks) are entered. Some of the following face marks may be different from those actually displayed. ※ Face marks that belong to other than the “かお” category appear only when the Prediction conversion is used. Word Kao moji Word...
※7 In either of the following cases, the FOMA terminal notifies you of an incoming voice call and you can select either to “answer a voice call” or to “continue with PushTalk call”. (The one that was not selected is terminated.) ...
The table below indicates whether another function is available for each function in the menu. The FOMA terminal may not operate as indicated in the table below depending on the status of each function. The functions marked with ■...
When an image recorded using the currently activated Camera/Movie function is not yet saved, the action for “★” is applied. ※6 If the i-mode arrival act is set to [Prefer i-mode], the FOMA terminal does not receive a PushTalk call. ※7 The Receive option cannot be executed.
Troubleshooting First, check if the software update is necessary for the FOMA terminal. If necessary, perform the software update (P.324). Trouble Cause and Remedy Check if the battery pack is attached properly (P.34). Cannot power on the FOMA terminal.
Page 317
Stereo Earphone Set (free sample product) to talk on the FOMA terminal. Disconnect the Stereo Earphone Set (free sample product) from the FOMA terminal or set the Earphone mic to [Valid main] and talk using the FOMA terminal microphone (P.269). Appendix/External Device Interface/Troubleshooting...
Error Messages In some cases, a 3-digit number may be displayed together with a message. This is a DoCoMo own code that DoCoMo displays on the FOMA terminal. Camera function error. Save the Check SMS Center setting data and quit the application ...
Page 319
The i-αppli stand-by display was Disconnected from PC canceled since it has attempted Continue using XXX (i-αppli name) The FOMA USB connection cable an unauthorized operation. Check and transmit data? (optional) is removed improperly the security error history (P.203).
Page 320
An image you edit may not be the information on a UIM inserted the Host selection is incorrect. in the FOMA terminal and its cor- saved because of insufficient Restore the host number to “iモー responding information on the IC memory on the FOMA terminal.
Page 321
Phonebook has reached images (P.146, 149, 236). on the FOMA terminal. Change 1,000. Delete unnecessary entries the image quality or image size, The remaining memory in the in the Phonebook (P.94).
Page 322
Root certificate has expired. Connect? the nearest DoCoMo shop (P.119). for the i-mode service. To use The certificate of the FOMA termi- i-mode, subscribe to i-mode. nal is not yet valid or has expired. If you signed up for i-mode after...
Page 323
The certificate of the site is not lem with the certificate of the site. memory. Quit a currently ex- supported by the FOMA terminal. ecuted function and then retry the SubMemory error Select [Yes] to connect or [No] to operation (P.257).
Page 324
A n o n - c o m p a t i b l e E x t e r n a l The Omakase Lock is set. While Memory is installed in the FOMA the Omakase Lock is set, all key terminal.
※ This FOMA terminal allows you to save data, such as the Phonebook, in the “Memory Stick Duo” and miniSD memory card. ※ This FOMA terminal allows you to save i-motion files and data that is used by i-αppli software in the miniSD memory card.
Page 326
※ Depending on the volume of data saved in the FOMA terminal, it may take time or it may not be possible to transfer data to a new terminal.
You can update the software even if the Host selection is set to other than [i-mode(UIM)]. Before updating the software, be sure to fully charge the battery pack of the FOMA terminal. You cannot update the software in the following cases:...
Page 328
Checking (Authenti− cating) The FOMA terminal starts SSL communication to check if the software update is necessary. If necessary, select the timing to start update and press [Now update] : Start updating the software. The software update may not be completed successfully if the server is busy.
Page 329
Verifying (Authenti− complete cating) After restarted, the FOMA terminal automatically connects to the server. It takes some time. ● When you did not confirm the update result on the screen in step 3, “ ” (Update complete) appears in the stand-by display.
Page 330
● If you execute the Reset all data&set or leave the FOMA terminal without a battery pack or with a fully expended battery pack for a long period of time after you complete the reservation, the date and time is reset, and the software update does not start even if the reserved time comes.
At first, update the pattern definitions to get the latest definitions. You can detect information related to the data and programs obtained into the FOMA terminal from an external source, such as data downloaded from a site or i-mode mail, and delete data or end the start-up of application that can cause a trouble.
Page 332
- While the Omakase Lock is set - When the UIM is not inserted - When another function is being used - When the FOMA terminal is connected to an external device such as a PC - When the international roaming service is used ●...
Page 333
” (Update definitions) appears. Confirm the information by selecting the icon to clear the notification. ● If you leave the FOMA terminal without a battery pack or with a fully expended battery pack for a long period of time, the date and time is reset, and the Auto-update may not operate correctly.
● The data may be lost as a result of malfunction, repair, or other handling of the FOMA terminal. Under no condition will DoCoMo be held liable for any damaged or lost data saved in the FOMA terminal.
*** International Commission on Non-Ionizing Radiation Protection Declaration of Conformity This product “ FOMA SO903i ” is declared to conform with the essential requirements of European Union Directive 1999/5/EC Radio and Telecommunications Terminal Equipment Directive 3.1(a), 3.1(b) and 3.2. The Declaration of Conformity is included in the supplied CD-ROM.
Important Safety Information AIRCRAFT Switch off your wireless device when boarding an aircraft or whenever you are instructed to do so by airline staff. If your device offers a “ flight mode ” or similar feature, consult airline staff as to whether it can be used on board.
Page 338
Index/Quick Manual Index ..........................336 Quick Manual ........................346...
Page 339
The index can be used as an “alphabetical table of contents”. Under each headword, terms relevant to it are listed. Not only terms representing function names actually displayed on the FOMA terminal, but also those that are a brief summary about the functions described in this manual.
Page 340
Display sites ......156 Pict. Effect ......148 Compose message ....176 Dlt max cost icon ...... 267 Record with FOMA terminal folded ... 140, 143 Cost limit notice ......266 DoCoMo keitai datalink ..... 280 Reset all ....... 149 Country code ......
Page 341
Go to location ....... 159 Save ........231 Holding ........62 Host selection ...... 164 Save from FOMA terminal ..231 Multiple connections .... 273 i-mode arrival act ....84 Save to FOMA terminal ..231 On hold ........62 i-mode menu ......
Page 342
Display quality ...... 223 Stand-by display ....202 Mail security......128 Download ......169 Stand-by NW setting .... 197 Mail setting (FOMA terminal) ..188 Edit folder ......235 Start automatically....201 Mail Settings (i-mode center) ..174 Edit movie ......224 SW description .....
Page 343
Mark list ........ 246 Update mng. info ....232 Insufficient memory ....240 Melody ........226 Missed call ......65, 115 Mark ........245 Attach to mail ....... 180 Movable contents ...... 239 Move ........236 Delete ........236 Movie player software ....312 Move page ......
Page 344
Optional and related devices Which way to disp....93 Set ring time ......82 ..........312 Phonebook image ..... 110 Setting when folded ....84 Osaifu-Keitai ......206 Pictographs ....... 284 PushTalk phonebook ....78 IC card lock ......210 List of Deco-mail pictographs...
Page 345
Roaming Guidance ....291 Set call record ......127 Save ........231 Set rec msg ........ 66 Save from FOMA terminal ..231 Set ring start time ..... 130 Save to FOMA terminal ..231 Setting when folded ....61, 84 Save to main ......
Page 346
Save ......231, 267 Call Rejection ......59 Volume Send Ir data ......242 Chara-den ......69 Caller’s voice ......103 Ticker ........172 Chg. to voice call ....48 GPS ........104 Timer (T) ........47 Display during a call ....44 i-Channel ......
Quick Manual Using the Quick Manual To bring the Quick Manual provided with this manual, separate it at the tear-off line and fold as shown below. You can conveniently bring the Quick Manual for “Overseas Use” with you when you are overseas and using the international roaming service (WORLD WING).
Page 356
● When you are driving Using the FOMA terminal while driving is dangerous because it may interfere safe driving. ※ Use the FOMA terminal after stopping the vehicle to park in a safe place or use the Public mode (Driving mode).
Page 357
※ Dial +81-3-5366-3114 to get connected when you place a ※ Dial +81-3-6718-1414 to get connected when you place a call from SO903i. (Press and hold the “0” key for at least call from SO903i. (Press and hold the “0” key for at least one second to enter “+”.)
Page 358
This manual provides instructions on how to install the SO903i communication configuration files (drivers) and FOMA PC Setup Software that are both included in the supplied CD-ROM as well as information necessary for performing data communication on the FOMA SO903i.
Precautions on Use About Data Communication Usage Fee of Internet Service Provider You can use the FOMA terminal for three types of data communication, packet communication, 64K data When you use the Internet, a usage fee is required for communication, and data transfer.
Page 360
(APN) in the FOMA terminal. You can wave condition is poor. save up to 10 numbers from one to 10 for the FOMA terminal. Default cid of the FOMA terminal Before Using Data Communication...
Connect the USB connector of the FOMA USB connection cable to the USB terminal of the PC. The FOMA terminal is connected to the PC and “ ” is Check the communication configuration files (drivers) (P.5). displayed on the FOMA terminal.
A user with Administrator privilege can install the Configuration Files (Drivers) software. To connect the FOMA terminal to a PC using the FOMA Set “FOMA SO903i CD-ROM” in the CD-ROM drive USB connection cable (optional) and perform data of the PC.
Page 363
Unlike in 64K data communication, a regular phone number Uninstalling the Communication is not used for a FOMA packet communication host. You must register in advance a host name called APN in the FOMA Configuration Files (Drivers) terminal for each host and specify this registration number (cid) in the host number field to connect.
Page 364
Check the installation destination and click [次へ]. Installing the FOMA PC Setup Software To use the FOMA PC setup software, install it from this CD-ROM. A user with Administrator privilege can install the software. Before starting installation, quit all programs that are running.
Page 365
Select [ 『mopera U』 への接続] or [ 『mopera』 への接 続] and click [次へ]. Click [OK]. The host (APN) is loaded from the FOMA terminal. Wait for a few moments. Check the name of the program to be deleted and click [はい].
Page 366
Click [OK]. The host (APN) is loaded from the FOMA terminal. Wait for a few moments. Enter a host name (any name) at [接続名]. You cannot enter half-width characters, “¥” “/” “:” “ *” “?” “<” “>” “|” and “””.
Page 367
Enter the line phone number of your provider. Connect the FOMA terminal to a PC before starting this E n t e r i n f o r m a t i o n s u p p l i e d b y y o u r p ro v i d e r operation.
Page 368
TCP/IP when you perform packet communication using the FOMA network. If you want to make the most of the communication performance of the FOMA terminal, you must optimize the communication settings using this software.
AT commands is necessary. In this section, Click [OK]. the “Hyper Terminal” preinstalled as a standard feature The host (APN) is loaded from the FOMA terminal. Wait for in the Windows is used for explanation. a few moments. Set a host (APN).
Page 370
Select [インターネットに接続する] and click [次へ]. Select [接続を手動でセットアップする] and click [次へ]. Select [ダイヤルアップモデムを使用して接続する] and click [次へ]. Put a checkmark in the checkbox of [モデム- FOMA SO903i] and click [次へ]. The window for selecting the device appears only when there are several modems.
Page 371
Enter any name at [ISP名] and click [次へ]. Check each item of the [全般] tab. When multiple modems are connected to a PC, put a checkmark only for [モデム - FOMA SO903i] at [接続 方法]. Remove the checkmark from [ダイヤル情報を使う].
Page 372
<cid>. When multiple modems are connected to a PC, put a For 64K data communication checkmark only for [モデム - FOMA SO903i] at [接続 方法]. Enter the phone number of a host. Remove the checkmark from [ダイヤル情報を使う].
Page 373
Click the [ネットワーク] tab, check each item, and Performing the Dial-up Connection click [設定]. Connect the FOMA terminal to a PC before starting this Select [PPP:Windows 95/98/NT4/2000, Internet] for [呼び 出すダイヤルアップサーバーの種類]. operation. Put a checkmark only for [インターネットプロトコル...
Do not enter AT commands during communication. ● Online command mode This mode allows you to operate the FOMA terminal using AT commands even if it is in the status where communication is in progress. In this case, an AT command is executed while the terminal remains connected to the destination.
Only n=0 can be specified (Can be omitted). AT&S<n> Sets the control of the DR signal to be output by the FOMA terminal. AT&S0 Always sets the DR signal to ON (Default, when the parameter is omitted). [&F][&W] Sets the DR signal to ON when the line is connected.
Page 376
AT+CGEQMIN=[<cid.[,,<n>[,<m>]]] Saves the criteria for permitting or not permitting QoS (Quality of Service) AT+CGEQMIN=2,,64,384 notified from the network when packet communication is established. AT+CGEQMIN=2,,64 AT+CGEQMIN=2,,,384 cid=1-10 Used for managing hosts (APN) saved in the FOMA terminal for AT+CGEQMIN= ※1 packet communication AT+CGEQMIN=<cid> ※2 n=None/64 The minimum uplink communication speed (Kbps) used between the FOMA terminal and the base station.
Page 377
Displays the version of the FOMA terminal. AT+GMR AT+GMR=? AT+IFC=<n,m> Sets the local flow control method between the PC and the FOMA AT+IFC=2,2 terminal. AT+IFC? n is used for setting the control of DCE by DTE while m is used for AT+IFC=? setting the control of DTE by DCE.
Page 378
AT&W. When this command is executed during communication, the operation for disconnecting the line is performed. Switches the FOMA terminal from the online data mode to the online command mode. The escape guard section is fixed to 1 second.
Page 379
RS-232C interface, does not indicate the actual speed List of Error Reports because the FOMA USB connection cable (optional) is used for connection between the FOMA terminal and a PC. Numeric value indication Text indication Reason ■...
Page 381
In the following Kuten code list, a 4-digit kuten code is expressed by the combination of the row for the first three digits and the column for the last digit. Example: When you wish to input “★” (corresponding to kuten code “0190”), locate it in the Kuten code list and determine the kuten code for it from its row (“019”) and column (“0”).