Advertisement
Item
Operation procedure
When FOMA terminal is turned on or
Notify missed
within the service area, this function
call; Activate
notifies you of the calls received with
FOMA terminal turned off or outside the
service area using SMS.
31 z Select Yes z Select Yes/
No
Yes: Notifies only the incoming calls with
caller ID.
No: Notifies all incoming calls.
32 z Select Yes
Notify missed
call; Deactivate
33 z Select Yes
Notify missed
call; Check
setting
4 z Select Yes
Hide Voice Mail
The icon that indicates the number of
icon
voice messages disappears.
INFORMATION
From the screen of Check setting, you can change the
●
setting by the submenu.
m1: Activate Voice Mail Service
m2: Deactivate Voice Mail Service
m3: Set the ringing time of Voice Mail Service
New voice messages can be played quickly from the
●
standby display. ☛P37
The number of messages displayed shows the number
●
of new voice messages provided by guidance when the
messages are played, which does not include the
number of saved voice messages.
Dial 1412 to use Voice Mail Service on the videophone.*
●
The 32K videophone call is not supported by Voice Mail
●
Service.
When connecting to the Voice Mail Service Center during
●
Chara-den, switch to Send DTMF by selecting from the
submenu to operate this service.*
When a new message is kept by videophone call, you
●
1
are informed it by SMS.*
*1
As of May 2006, this service has not been provided yet.
Using Call Waiting Service
When a third party calls you while you are on the
phone, this service notifies you with the call
waiting ring alert. This allows you to place your
current call on hold and then answer the other
call.
m892
1
Activate
Deactivate
Check setting
1
☛P83
1
Call Waiting
2
Perform the following operations
Item
1
2
3
Putting the current call on hold to answer
an incoming call:
n during a call
1
The current call is put on hold and the second
call can be answered.
･
Multi connecting appears on the screen.
To switch the other parties: t
･
･
You can put your current call on hold by
pressing o. Press o again to release the
hold.
To end the call on hold: m1 during Call
･
Waiting (multi-connection)
Press f when you finish talking to the
2
other party
The call is ended and the ring alert sounds.
･
To resume talks with the other party on hold:
n
Answering an incoming call after finishing the
current call
f during a call
1
A ring tone sounds to indicate there is an
incoming call.
Press n
2
You can receive a new call.
Holding the current call and making another call
1
Enter the phone number during a call
･
You can select the other party's phone number
from the received call history by pressing l,
from the redial data by pressing r, or from
the phonebook by pressing p instead of
entering the phone number.
n
2
Your current call is automatically put on hold and
you can begin talking to the other party you
called.
･
Multi connecting appears on the screen.
To switch the other parties: t
･
Operation procedure
z
Select Yes
z
Select Yes
z
Select Yes
Next
393
Advertisement
Chapters
