Advertisement
■ Charging the battery in the desktop holder
Enter key
Desktop holder
･
When inserting FOMA terminal into the desktop holder, be careful not to put a strap in the holder.
･
When FOMA terminal is not inserted firmly or it leans, the battery is not charged normally. Insert
FOMA terminal until it is locked certainly.
Charging in a car
Use the FOMA DC adapter 01 (optional) to charge the battery in a car. It can be used with negative ground cars
(both 12 V and 24 V).
･
For details, refer to the DC adapter manual.
aInsert the cigarette lighter plug of the DC adapter into the cigarette lighter socket of the car.
bTurn off the power of FOMA terminal and open the external connection terminal cap.
cInsert the DC adapter connector firmly until it clicks.
dCheck that charging starts.
When charging is completed, remove the DC adapter connector from FOMA terminal while pressing the
release buttons on both sides of the connector, and remove the cigarette lighter plug from the cigarette
lighter socket. Then, close the terminal cap.
Enter key
INFORMATION
If you charge FOMA terminal with the car engine off, the car battery may be discharged. Charge the battery when the
●
car engine is running.
When not charging, remove the DC adapter from the cigarette lighter socket.
●
The DC adapter fuses (2A) are consumable items. New fuses are available at automotive supply stores.
●
44
100 V AC outlet
Power plug
AC
Connector
adapter
(
up)
Connector
(
up)
Release button
aUnfold the power plug from the AC
adapter and plug it into a 100 V AC
outlet.
bInsert the AC adapter connector in
the desktop holder until it clicks.
cAlong with the desktop holder,
insert FOMA terminal at the angle as
shown in the figure.
dCheck that charging starts.
Check that the Enter key lights in red.
When charging is completed, remove
FOMA terminal from the desktop holder
by tilting it to the front while holding the
desktop holder by hand.
Cigarette lighter plug
Cigarette lighter socket
DC adapter
Advertisement
Chapters
