Advertisement
■
Changing reservation:
a Select Change
A confirmation screen for sending your
terminal ID is displayed.
b o
The option selection screen is displayed.
･
Follow the procedure from Step 2 in
"Updating software at pre-specified time".
☛P460
Pressing o on the confirmation screen
･
for sending your terminal ID makes
connection to the server and your private
information concerning the mobile phone
(such as model, serial number) is sent.
■
Canceling reservation:
a Select Cancel
A confirmation screen for sending your
terminal ID is displayed.
b oo
The reservation is canceled and the menu
is displayed.
Pressing o on the confirmation screen
･
for sending your terminal ID makes
connection to the server and your private
information concerning the mobile phone
(such as model, serial number) is sent.
When the reserved time arrives
When the reserved time arrives, the screen as shown
below is displayed and updating software is started
automatically. Before the reserved time, make sure
that the battery is fully charged and the handset is in
a location where radio waves reach and then show
the standby display.
When downloading is completed, rewriting software
is automatically started, followed by reload.
INFORMATION
Note that updating software may not be activated even
●
though the reserved time arrives in case of using the
other functions. In case the reserved time arrives while
talking or receiving messages, updating software starts
after finishing talking or receiving messages.
If software update is executed when ON is set for PIN1
●
Code On/Off, the PIN code entry screen will be displayed
at the time of automatic reload after completion of
software updating. You cannot make/receive calls or
PushTalk calls and operate communication functions if
the incorrect PIN1 code is entered.
z
Select Yes
･
To cancel the software
update: f
z
Select
Yes
If an alarm clock or any alarm is set for the same time,
●
the alarm clock or the alarm takes precedence and the
software update may not be started.
Protecting FOMA terminal from hazardous
data
Update pattern definition first to keep the
pattern definition up-to-date.
For the data or program downloaded via a website or
received mail, this function detects data that may
cause troubles and then deletes it or inhibits
activation of applications in order to protect FOMA
terminal from viruses.
･
Pattern definition is used for checking. Update
pattern definition because it is updated whenever
a new trouble is detected.
･
Virus Scan Function is for preventing the data
that cause some problem to mobile phone from
invading when viewing websites or receiving mail.
Please note that if pattern definition
corresponding to specific troubles has not been
downloaded to the mobile phone or such pattern
definition does not exist, this function cannot
prevent the trouble from happening.
･
Pattern definition is different depending on the
model of mobile phone. Please keep in mind that
DoCoMo may stop distributing the pattern
definition for the models that have been on the
market for 3 years or more.
･
When updating pattern definition, your private
information concerning the mobile phone (model,
serial number, etc.) is automatically sent to the
server (the server for the scan function managed
by DoCoMo). DoCoMo does not use the sent
information for purposes other than the scan
function.
Setting Virus Scan Function
If this setting is set to ON, data or program is checked
automatically when it is displayed or executed.
Default ON
m8373
1
1
z
2
Select Yes
Virus Scan Function
Scanning Setting
Next
461
Advertisement
Chapters
