Hold down # for over a second
1
・
Timed pauses can be entered in succession.
・
Each timed pause is followed by a second interval.
・
You cannot make a call if a timed pause is entered at the beginning of the phone number.
INFORMATION
Tone signals (DTMF) may not be received depending on the receiving device.
●
You cannot make a call to another party by putting the current call on hold and entering a pause (P) or timed pause (T).
●
When it is necessary to send tone signals (DTMF) following voice prompts as in making ticket reservations, the
●
speakerphone function is useful. In this case, input tone signals (DTMF) after turning on the speakerphone function.
Switching from a voice call to a videophone call
You can switch to a videophone call by operating from the submenu during a voice call when the other
party's terminal can switch calls. Switching can be performed only from the terminal which made the
voice call.
・
This operation can be performed between the terminals that support switching between voice call/
videophone call.
・
To switch to a videophone call, the other party needs to set Indication ON of Notify Switchable Mode in
advance. ☛P93
m1 during a voice call
1
・
A guidance informing that the call is being switched is played during switching.
・
Select No to return to the voice call talking screen.
・
When Speakerphone is set to ON in Videophone Settings, the speakerphone function is automatically
turned on when the call is switched to a videophone call.
INFORMATION
During packet communication, disconnect the packet communication and switch to a videophone call.
●
When the other party is during packet communication, the call cannot be switched to a videophone call.
●
While talking on the phone using Call Waiting Service, you cannot switch the call to a videophone call.
●
It takes about 5 seconds to switch. In addition, it may take longer to switch depending on radio wave conditions.
●
Depending on radio wave conditions, a voice call and videophone call may not be switched and the call my be
●
disconnected.
A second call received while switching calls is rejected.
●
The speakerphone function is turned on/off every time a voice call and videophone call are switched.
●
The settings (such as switching the cameras or selecting the frame) during a videophone call are canceled every time a
●
voice call and videophone call are switched.
According to the call duration of a voice call and videophone call, the call charges are added up, respectively.
●
The call is not charged while Switching... is displayed.
●
Switching from a videophone call to a voice call ☛P82
●
*
From January 2001, the DoCoMo display beeper name has changed to "QUICKCAST".
z
Select Yes
53