Advertisement
Example
Setting Display light time for normal use
m8241
1
1
2
Setting the time when connecting to the optional AC adapter (Desktop holder) or DC adapter: 2
■
Setting the time during i-mode: 3
■
Setting the time during shooting with Camera: 4
■
Setting the time during shooting with Movie Camera: 5
■
Setting the time during displaying or playing the video/i-motion list: 6
■
■
Setting the time during operating i-
Press any of 1 to 7
3
For setting items other than Normal use, press 1 or 2. When Terminal setting is set, the lighting time
･
set for Normal use and the setting of lighting range and brightness are used.
･
When Always/Always on is set, the display is always lighted with the brightness set in Brightness. However,
it is lighted by High when AC adapter is connected.
･
When i-
ppli active is set to Software, the display is lighted in accordance with the i-
α
Setting the range
Set whether to light the display and keys or display only
･
The Speed Selector is not lighted.
Default Display + Key
m8242
1
Adjusting the brightness
Set the brightness for lighting the display.
Default Normal
m8243
1
INFORMATION
When Normal use of Display light time is set to other than Always, if you do not press any keys for about 90 seconds, the
●
display disappears and FOMA terminal goes into a power saving mode. If there is any key operation*
the Speed Selector) or an incoming call, the display appears again.
･
The display does not disappear in following cases: during a videophone call, when the shooting screen of Camera/
Movie Camera is displayed, while shooting, while charging with AC adapter connected of Display light time set to Always
on, or while executing the function for which Display light time is set to Always on.
*1 In the case of other than during call, a number, etc. is not entered even when pressing dial keys.
When Normal use of Display light time is set to other than Always, if you set Key Lock, the display disappears. The display
●
or keys do not light by pressing the keys. However, if you press f, open FOMA terminal or have an incoming call, the
display lights.
･
The display does not disappear in following cases: during a videophone call, when the shooting screen of Camera/
Movie Camera is displayed, while shooting, while charging with AC adapter connected of Display light time set to Always
on, or while executing the function for which Display light time is set to Always on.
ppli: 7
α
z
Press 1 or 2
z
Press any of 1 to 3
ppli software.
α
1
(except rotating
145
Advertisement
Chapters
