Advertisement
When ON is set and there are multiple newly arrived information, the Enter key flashes in the following priority. However,
●
even if unread ToruCa exists, the Enter key does not flash.
aMissed calls (voice call/videophone call/PushTalk call/recorded message)
bUnread messages (mail/chat mail/SMS)
cUnread messages (Message R)
dUnread messages (Message F)
Changing the font size
The character size on the character entry screen (for notes, etc.), the mail view screen or the site display
screen can be changed (from 5 types or 3 types).
Minimum: 12 dots
Default Standard (all)
Example
When setting at once
m82711
1
･
Changing the setting of All listed alters the setting of i-mode view, Mail view and Text input.
■
Setting the character size on the display screen of sites or screen memos:
m82712
Setting the character size on the mail view screen: m82713
■
■
Setting the character size on the message text entry screen or the character entry screen by full-
screen entry (notes, etc.): m82714
Press any of 1 to 5
2
･
The example is displayed in the highlighted character size.
Press 1 to 3 when setting the character size for i-mode view or Mail view.
･
INFORMATION
The character size during in-line entry cannot be changed.
●
When changing the setting of All listed to Maximum or Minimum, the setting of i-mode view or Mail view becomes Large
●
or Small for each.
The font size can be changed from the mail view screen as well. The setting is reflected to Mail view of this setting.
●
When changing the setting of Text input, the character size of predict conversion options displayed when entering
●
characters and the character size on the mail composition screen are also changed. However, if Text input is set to
Maximum or Minimum, the character size on the mail composition screen becomes Large or Small for each.
150
Small: 16 dots
Standard: 20 dots
Font Size Setting
Large: 24 dots
Maximum: 28 dots
Advertisement
Chapters
