Advertisement
･
End character edit entry (displayed only when
characters are entered in Slot Input Method)
Changing input modes
Pressing n switches the input mode as follows:
･
The available input modes are different depending
on the character entry screen.
Indicating that input
mode can be switched
by n.
n
Indicating that you can
switch One-byte and
Two-byte by % .
*1 Switching cannot be made in Slot Input Method.
･
全かな
is displayed for input mode when only
hiragana can be entered.
After pressing n, the input mode switches as
･
shown below by the following operations:
One-byte alphabets
One-byte numeric
Hiragana/kanji
One-byte katakana
： n ／ r
･
In Slot Input, the mode switches as follows:
One-byte
Hiragana/
alphabets
kanji
： n ／ r
Input mode (current status)
漢字: Hiragana/kanji
1
全ｶﾅ: Two-byte katakana*
1
全英: Two-byte alphabets*
1
全数: Two-byte numeric*
半ｶﾅ: One-byte katakana
半英: One-byte alphabets
1
半数: One-byte numeric*
Input mode (input mode to
select is displayed in reverse
order)
漢 : Hiragana/kanji
1
ア : Two-byte katakana*
1
Ａ : Two-byte alphabets*
1
１ : Two-byte numeric*
ｱｧ : One-byte katakana
Aa : One-byte alphabets
1
12 : One-byte numeric*
Two-byte alphabets
Two-byte numeric
Hiragana/kanji
Two-byte katakana
： %
： l
One-byte
katakana
： l
Entering characters using 5-touch Input
Method
Entering characters
Example
Entering " 企業 " in the phonebook
1
Highlight Enter name field
The character entry screen is displayed.
･
In English display, the alphabet mode is
displayed first. Press n repeatedly to
change to the hiragana/kanji mode.
2
Enter "きぎょう"
→ Press 2 twice.
"
き
"
Press r to move the cursor 1 position
to the right. (It is not necessary when
the cursor was moved by the automatic
cursor function.)
→ Press 2 twice
"
ぎ
"
→ Press 8 3 times
"
ょ
"
→ Press 1 3 times
"
う
"
Press c to delete the entry when you have
･
pressed a wrong key.
･
To enter "゛" and "゜": Enter the character
For example, after entering "ほ", each pressing of
( changes the character to: ぼ→ぽ→ほ.
For characters that do not accept "゛" or "゜", it is
entered as two-byte characters.
To change upper/lower case, press t.
･
■
Returning to the previous character:
Pressing a immediately after entering a
character brings back to the previous
character. The character appears in the
reverse order of character switching every
time a is pressed. (e.g. ...→ 1 →お→え→
う→い→あ→ 1 →...) However, when voiced
or semi-voiced sounds are entered or upper
and lower cases are changed, you cannot
switch characters.
5-touch Input Method
Kana/Kanji Conversion
z
o
漢字
is indicated
z
(
z
t
z
(.
Next
405
Advertisement
Chapters
