Advertisement
Press p
4
･
When Set i-
ppli display is set to Yes, a
α
confirmation screen appears asking whether to
set i-
ppli as the standby display. Selecting Yes
α
sets the i-
ppli standby display.
α
INFORMATION
Even if Speed selector is set to OFF, some i-
●
invalidate the Speed Selector functions.
Even if Up and down or Right and left is set for Speed
●
Selector, rotating Speed Selector may cause a different
action or no action for some i-
Note that if you set No for Set NW transmission, i-
●
may not be started and timely information such as stock
prices or weather forecast may not be provided by
i-
ppli.
α
If Yes is set for Use icons, information about icons for
●
unread mail, unread Message R/F, remaining battery
level, Silent Mode, and icons within service area/outside
service area may be sent to IPs through the Internet,
which may give the information to a third party. When Use
icons is set to No, i-
ppli that requires the icon
α
information may not operate.
If you rotate Speed Selector during i-
●
moving direction conforms to the setting of Direction of
Set speed selector. However, some i-
setting of moving directions.
Setting the lighting and vibrator during i-
running
Setting display light
･
The i-
ppli standby display light operation
α
conforms to the setting of Normal use of Display
light time of Display Light Setting. ☛P144
･
While Public mode (Driving mode) is on, the light
does not operate while i-
Software is set.
･
This setting is also reflected to i-
Display light time of Display Light Setting.
Default Terminal setting
m324
1
Terminal setting：
The setting of Normal use of Display light time
of the display light setting is assumed.
Software：
The light comes on according to i-
Setting vibrator
Allow the vibrator operation by i-
･
While Public mode (Driving mode) is on, the
vibrator does not operate while i-
regardless of this setting.
ppli may not
α
ppli.
α
ppli
α
ppli operation, the
α
ppli may ignore the
α
ppli
α
Display Light/Vibrate Effect
ppli is running even if
α
ppli active of
α
z
Press 1 or 2
ppli.
α
ppli.
α
ppli is running
α
･
This setting is also reflected to the vibrator setting
of Alerts & Sounds.
Default ON
m325
1
Starting another i-
ppli application from i-
α
You can start i-
ppli specified by some i-
α
applications, and enjoy it without returning to the
software list.
1
If a message appears indicating that the
ppli will be started, press o
specified i-
α
INFORMATION
If the i-
ppli to start is not specified, select i-
●
α
When the i-
ppli does not exist in the software list even if
●
α
specified, it is necessary to download it.
Using pre-installed i-
The following i-
ppli applications are registered
α
by default:
･
珍さんの釣り物語 (Chin-san's Fishing)
･
コラムスジュエル(Columns Jewel)
･
電子マネー「Edy」(Electronic money "Edy")
･
Ｇガイド番組表リモコン(G-GUIDE TV
Remote Controller)
･
ケータイクレジット「iD（アイディ） 」(iD
credit payment service)
･
「DCMX」クレジットアプリ(DCMX Credit i-
･
珍さん計画DXおこづかい帖プラス(Chin-san's
Scheduled Cashbook)
･
ｉアニメっちゃメーラー superDX500
(i-anime Mailer superDX500)
･
便利！多機能電卓(Useful! Multifunction
Calculator)
Select each i-
ppli application from the list to start.
α
･
Some i-
ppli names may be different from those
α
on the display.
･
珍さん計画 DX おこづかい帖プラス and ｉアニ
メっちゃメーラー superDX500 can be set as the
i-
ppli standby display.
α
･
If you delete i-
ppli preloaded by default, you can
α
download it from i-mode site "My D-style". ☛P426
z
Press 1 or 2
ppli
α
ppli
α
ppli.
α
ppli
α
ppli)
α
275
Advertisement
Chapters
