Advertisement
2
Select a frame
Applying special effects to outgoing image
You can apply the following effects to outgoing images. These settings can be changed only while sending your
self image.
Item
Icon
Full auto
Sensitivity up
Super sensitivity up
Adjust backlight
Spot photometry
Scenery
For details ☛P187
･
Default Full auto
m21 during a call
1
Press any of 1 to 9, 0, ( or #
2
Adjusting the brightness/color density/flicker of outgoing image
You can adjust the brightness and color density in 5 levels. Also, you may be able to control the flicker of
images, if it occurs, by making settings according to the power supply frequency in your area.
･
This setting can be changed only while your self image is being sent.
･
The brightness and color density may not be changed depending on the setting for Screen Mode/Effect.
･
This setting is retained even after the call is finished.
･
The flicker adjustment settings for Camera and Bar Code Reader will reflect changes in this setting.
Default Brightness: level 3 Density: level 3 Flicker adjustment: Auto
･
While the in-camera is used, the mirror image (left-right reversed image) is
displayed on the screen and the normal image (right directed image) is sent to
the other party. While the out-camera is used, the same image as displayed on
the screen is sent to the other party.
To cancel sending the frame: o while sending a frame
･
Frames set by default ☛P424
･
Item
Icon
Night
Twilight
Surf&Snow
Sport
Pet
Gourmet
Press & to switch the pages.
･
The effect currently applied
Item
Icon
Letter
Color reversal
Painting
Woodcut
Whiten
Suntan
Scene Mode/Effect
Item
Icon
Soft touch
Mono tone (red)
Mono tone (green)
Mono tone (blue)
Monochrome
Sepia
Camera Setting
Next
87
Advertisement
Chapters
