Advertisement
Light pattern：
Set the lighting pattern of the Enter key for
the set time.
･
When you select Select, select a lighting
pattern. When Sync melody or OFF is set,
Light color cannot be set.
･
If you select Terminal setting, the lighting
pattern conforms to the setting of Light
Alert Setting.
Light color：
Set the color of the Enter key for the set time.
･
When you select Select, select a light color.
･
If you select Terminal setting, the lighting
pattern conforms to the setting of Light
Alert Setting.
Press p
6
In the standby screen,
schedule alarm is also set) is displayed.
INFORMATION
If Sync melody is set for the lighting pattern, the Enter key
●
may not light or flash depending on the melodies.
If you delete the data specified as a alarm clock sound,
●
Terminal setting is assumed.
When the set time comes
1
The alarm clock rings
Press f to stop the alarm
2
The screen before the alarm clock sound
reappears.
･
When a minute has passed without any operation
or any key or button other than f is pressed,
the alarm clock sound stops and the snooze
operation starts. The snooze operation repeats
1-minute ringing and 4-minute interval for 30
minutes. During an interval of snooze operation,
スヌーズ中
Snooze is displayed on the screen (if
video/i-motion is set, the first image is displayed).
When you press f, the snooze operation
terminates and the screen returns to the display
before the alarm clock rang.
･
If a call or PushTalk call arrives while the alarm
clock is ringing, the snooze operation starts.
or
(when a
The alarm clock
operates according to
the settings. If video/i-
motion is set for the
alarm clock, it is
displayed.
･
If more than one 目覚まし (alarm) is set for the
same time, the one with the lowest item
number in the Alarm list takes effect.
･
For alarm indication while another function is
being used ☛P368
Alarm clock does not ring at the set time
･
When power is off, neither the power is turned on
nor the alarm clock rings. To enable the alarm
clock while the power is off, set Alarm Auto Power
ON to ON.
･
When All Lock or PIM Lock is activated, the alarm
clock does not ring.
･
When a Chara-den image is displayed at the set
time, the alarm may sound a few seconds later.
･
When an alarm clock and a schedule alarm are
set for the same date and time, the alarm clock
operates first, followed by the snooze operation
and then the schedule alarm is issued. Even after
the schedule alarm operation is finished, the
snooze operation of the alarm clock is continued.
Setting to turn power on automatically at the
time specified for the alarm
Set to automatically turn the power on and issue
an alarm or alarm clock sound if the power is off at
the date and time specified by Scheduler or Alarm
Clock.
Default OFF
m855
1
Press 1
2
･
To set not to turn the power on automatically:
2
INFORMATION
Set this function to OFF in areas where mobile phone
●
use is prohibited, such as in hospitals, medical facilities
and airplanes.
If Alarm Auto Power ON and PIN1 Code ON/OFF have
●
been set to ON, the power is turned on and the alarm
sounds before displaying the PIN1 code entry screen when
the set date and time for an alarm or schedule arrives.
When pressing f to stop the alarm, the PIN1 code entry
screen appears. At this time, the default melody sounds as
the alarm or alarm clock sound even when the downloaded
melody or i-motion is set for the alarm or alarm clock sound.
アラーム・メロディ
The default melody is
アラーム・女性ボイス
for the alarm and
voice) for the schedule alarm.
Alarm Auto Power ON
(Alarm: melody)
(Alarm: female
369
Advertisement
Chapters
