Advertisement
Handling instructions
General
● Do not get the components wet.
The FOMA terminal, battery pack, adapter (and charger) and UIM are not waterproof. Avoid using the components
in a bathroom or other high humidity areas or locations exposed to rain. If you carry the components, sweat could
cause internal corrosion that leads to equipment failure. As a result of investigation, if component failure is found to
be water-related, repair is not covered by the warranty and may not be able to be performed.
In such a case, should it be found to be possible to repair the unit, you will be billed for all repairs.
● Clean the components with a soft dry cloth (such as a lens cloth).
• The FOMA terminal display may have a special coating on it so that the color LCD provides a clear view.
Rubbing the display strongly with a dry cloth for cleaning could damage the display. Handle with care and
clean the display with a soft dry cloth (such as a lens cloth). Also note that leaving the display with dirt or
moisture attached could cause spots or remove the coating on it.
• Using alcohol, thinner, benzene or detergents could cause the printed text to fade or disappear, or the
equipment to become discolored.
● Occasionally clean the terminals with a dry cotton swab.
Dirty terminals could cause intermittent contact that could interrupt the flow of power to the unit. Such a
situation also causes insufficient charging. Use a dry cloth or cotton swab to clean the terminal.
● Do not place the components near an air conditioner vent.
Sudden changes in temperature could cause condensation, leading to corrosion inside the components and
equipment failure.
● Do not place the FOMA terminal in locations where it could be exposed to excessive pressure.
Do not place it in a bag together with many other things or in your pocket when you sit down as this could
exert pressure on the LCD or damage the internal boards, resulting in equipment failure. Damage arising
from such causes is not covered by the warranty.
● Carefully read the instruction manuals supplied with the battery pack and adapter (and charger) before
use.
FOMA terminal
● Avoid extremely high or low temperatures.
Use in an environment with a temperature of 5 to 35 ° C and relative humidity of 45 to 85 %.
● If the FOMA terminal is used near a radio, television or general subscriber phone, it could affect such
equipment. Use the phone as far away from such equipment as possible.
● With regard to data stored in the FOMA terminal, keep it separately in a memo, etc. so as not to
permanently lose important data.
NTT DoCoMo cannot be held responsible in any way for the loss of stored data.
● Do not put the FOMA terminal in your back pocket and sit on it. Avoid putting the phone in the bottom
of a bag, etc. where it is subject to excessive pressure.
Damage may result.
● Do not close the FOMA terminal with the strap held inside.
Malfunction or damage may result.
● It is normal for the FOMA terminal to become warm during using or recharging. You can continue to
use it while warm.
● Do not aim the camera directly at the sun and leave it.
Elements may be discolored or baked.
● The FOMA terminal is compatible with Omakase Lock (☛P159)．
Omakase Lock is a service that locks FOMA terminal at the request from the subscriber.
Note that the FOMA terminal is locked when a request is made by the subscriber even if the subscriber is
not the user of FOMA terminal.
19
Advertisement
Chapters
