Advertisement
3
Select each item to set
Incoming setting ：
Sets the operation for an incoming call with no caller ID.
･
When Disable settings is set, the ring alert set in Call Alert sounds.
･
Setting Call Rejection rejects an incoming call.
･
Setting Ring alert off makes the ring alert to be silent.
･
When Select ring tone or Movie ringtone is selected, select a melody or video/i-motion file.
･
When Disable settings or Call Rejection is set, Show image cannot be set. When a video/
i-motion with sound and image is set for Movie ringtone, Show image is set to Sync ring alert.
Show image ：Sets an image displayed for an incoming call with no caller ID.
･
When Standard image is selected, the default image is set.
･
When Select image is selected, select Select image (under List images) to select an image.
･
When i-motion is selected, select a video/i-motion file from the folder list. When the folder
list is not displayed, select Select image (under List images).
Playing and checking a melody or video/i-motion file when selecting ☛P129
･
Press p
4
INFORMATION
When Call Rejection has been set, the rejected calls are recorded as missed calls in the received call history.
●
Standard image may be set for Show image when the video/i-motion with only sounds (i-motion with no image such as
●
singer's vocals) is set for Movie ringtone in the incoming setting. Note that the image except for Flash movie can be
changed by selecting Select image in the Show image field.
When Reject non-Reg. Caller is set and a call without caller ID notification is received, the setting of Reject non-Reg.
●
Caller takes precedence over this function.
Ring Alert Action
Setting not to answer a call from the party not registered in the phonebook
The ringer action by a ring alert or vibrator is set to be activated for an incoming voice call, videophone call
or PushTalk call from a caller who is not registered in the phonebook or does not notify the phone number
after the specified time has elapsed. The function is effective to nuisance calls such as "One-Ring Call".
･
This function cannot be set when Reject non-Reg. Caller is set to ON.
Default OFF
m815
1
2
Select each item to set
Delayed ring alert：Specifies whether to enable this setting.
･
Delay time (sec) ：Sets the time between the arrival of calls and the start of ringing (between 1 to 99
seconds).
：Sets whether to display a missed call which ends in less than the time set in Delay time
Missed call
in the received call history.
Incoming setting
When OFF is set, the following items cannot be set. The ringer action will be started
immediately after receiving a call.
Mute Ring Time Setting
Next
167
Advertisement
Chapters
