Communicating on PushTalk
1
Enter the phone number
・
Do the same as you enter a number for a voice call.
g
2
Making a call with the speakerphone function while FOMA terminal is open: g (for over a
■
second)
3
Communicate on PushTalk
・
When a member answers while 3 or more parties are communicating, the connection tone sounds.
・
When a member exits from PushTalk while 3 or more parties are communicating, the disconnection tone
sounds.
Switching to the speakerphone function: a or n
■
■
Speaking:
a Hold down g and speak
When you press g, you hear the floor acquisition sound.
・
While another party is speaking, pressing g makes the floor acquisition failure sound and you
・
cannot speak.
b Release g when you finish speaking
When you release g, a tone sounds to indicate the end of floor acquisition.
・
・
When the limit of time for the floor acquisition approaches, a tone sounds to indicate the floor
acquisition is ending.
Press f when you end PushTalk
4
・
To end a PushTalk call by closing the FOMA terminal, change the setting of PushTalk Close Setting.
INFORMATION
You can make a PushTalk call from the FOMA terminal phonebook, UIM phonebook, redial data, received call history,
●
i-
ppli, or scan result of Bar Code Reader. You can also make a PushTalk call from Phone To (AV Phone To) in mail,
α
sites, or ToruCa.
You can make a PushTalk call by setting conditions. ☛P58
●
You cannot make a PushTalk call during a voice call, videophone call or data communication. During PushTalk, you
●
cannot make a voice call or videophone call to a different party.
When you make a PushTalk call during i-mode, i-mode is disconnected.
●
When you make a PushTalk call when i-
●
Speaking time with a single floor acquisition is limited. When the time limit arrives, the floor acquisition is canceled.
●
If no party acquires the floor for a certain period of time, PushTalk ends.
●
If you set Answer in PushTalk Arrival Act, a voice call coming in while you are speaking cancels the floor acquisition.
●
You cannot call an emergency number (110, 119, or 118) during PushTalk.
●
Operation during PushTalk
The following operations can be performed from the submenu. You can change the earpiece volume during
PushTalk with %.
When the other party answers, the answering tone
sounds and PushTalk starts.
・
When you make a PushTalk call with FOMA terminal
closed, the speakerphone function is turned on.
ppli is running, i-
α
α
PushTalk button
ppli is suspended.
Next
97