Advertisement
Setting images to be sent to the other party
You can change images and apply special effects to the image sent to the other party during a
videophone call. Also, you can switch between the in-camera and the out-camera.
Switching the outgoing image between your self image and the substitute image
Press t during a call
1
©BVIG
The substitute image
Setting the quality of outgoing and incoming images
･
Setting Prefer motion spd makes motions smoother in a little lower-definition image.
･
Setting Prefer img qual makes motions a little slower in a higher-definition image.
Default Normal
Example
Setting the quality of outgoing image
m71 during a call
1
Pressing & during a call also switches the quality of outgoing image.
･
Setting the quality of incoming image: m72 during a call
■
Press any of 1 to 3
2
Setting a frame on the outgoing image
The frame can be set while sending your self image.
･
Only the frame with the display size of 176 x 144 or smaller can be selected. As for downloaded frames,
only the frame with the display size of 176 x 144 can be selected.
m31 during a call
1
86
･
Each press switches the image between your self image (
or
substitute image (
･
Even when Chara-den is set as the substitute image, Chara-den may not be
displayed. If this happens, the default image for the substitute image in Image
Setting is sent to the other party. ☛P92
). ☛P92
) and the
Frame
Advertisement
Chapters
