Page 1 Manual Easy search/CONTENTS/ Handling instructions Before using F903i Voice call/ ’06.10 Videophone call PushTalk Phonebook Settings of Sounds/ Displays/Lights Safety Settings Camera i-mode/i-motion/ i-Channel Mail i-αppli Osaifu-Keitai/ ToruCa GPS function Full Browser Data Operation Playing Music Other Convenient Functions Network Service Data Communication Character Entry Overseas Use...
Page 2 Maintain a separate record of the data you register in your FOMA terminal. If the data should be deleted, DoCoMo assumes no responsibility for the loss of any data.
Page 3: How To Use This Manual
Using Quick Reference Manual P490 manual and carry it with you anywhere. In this "Manual for FOMA F903i", "FOMA F903i" mobile terminal is usually referred to as "FOMA terminal". This manual explains functions performed with a microSD memory card. A microSD memory card is required separately.
Page 4: Received Calls
Recording the other party's voice or image ................Answer machine Using Voice Mail service........... Voice Mail Searching from Menu list Functions can be searched for using the words displayed on the FOMA terminal screen. d Phonebook & Logs Menu Default Page a Phonebook...
Page 5 I Write down the contents of recorded message separately in a notebook, etc. recorded data may be lost function due to failure, repair or modifications of FOMA terminal. If recorded data should be erased, DoCoMo Default assumes no responsibility for the loss of any data.
Page 6: Table Of Contents
Easy search Functions which you want to know can be searched for using friendly words. Convenient Showing/Hiding your phone number ..Caller ID notification functions for Putting the call on hold ..........On hold calls Using a speaker for talking ....Speakerphone function Switching from voice call to videophone call ......
Page 7 Viewing shot still images ............308 Saving phonebook and other data as a precaution against data loss............ Data Security Service Safety and Locking FOMA remotely in case of misplacement, etc. security ................Omakase Lock Preventing unexpected operations in a bag ..
Page 8 Easy search ........4 Main functions of FOMA F903i ..... . 8 CONTENTS Making full use of F903i .
Page 9: Easy Search/Contents/Handling Instructions
Roaming guidance Services available overseas etc. Menu list Combination of Multiaccess/Multitask functions Services Appendix/ External Device available Options and related devices FOMA F series Data link Networking/ software Error messages Warranty and After-Sales Service Software Troubleshooting update Scanning function SAR certification information etc.
Page 10: Main Functions Of Foma F903I
Main functions of FOMA F903i FOMA is the name of a set of services provided by DoCoMo based on W-CDMA, which is recognized as one of the systems compliant to the global standard for 3rd generation wireless communications (IMT-2000). It's amazing i-mode is an online service used with i-mode terminal.
Page 11: Full Browser
Audio (WMA) files transferred location information with higher accuracy by using " from music CDs, etc. to a PC can be saved to FOMA (imadoco-search)" that allows a third party to confirm terminal or microSD memory card and then played FOMA terminal location information from an i-mode in stereo sound.
Page 12 Making full use of F903i The superior functions of F903i are explained in actual displays. PushTalk You can talk among multiple parties (a maximum of 5 parties including yourself) by a simple operation; that is, just pressing the PushTalk key ( ) to invoke a PushTalk phonebook, selecting the parties and pressing again.
Page 13 Enjoyable and convenient videophone Using videophone, you can talk with a party in a remote place, displaying each other's face. Videophone can be used conveniently for video conference in business, shopping consultation in a private life and many other scenes. Which do you prefer? Participating in a conference by...
Page 14: Precautions (Always Follow These Directions)
This symbol denotes that an instruction Precautions (ALWAYS must be obeyed at all times. FOLLOW THESE DIRECTIONS) I Before using your FOMA terminal, or This symbol denotes that the equipment should be unplugged. when necessary, read the following precautions to ensure safe use and handling.
Page 15 May cause malfunction or injuries. When using Osaifu-Keitai in a place such as Store the equipment out of reach of a gas station, be sure to turn OFF the FOMA small children. terminal before using it. The equipment can be accidentally (When IC card lock is activated, deactivate it swallowed or cause injuries.
Page 16: Handling Foma Terminal
May cause hearing loss. the power is set, cancel the setting before turning the power off. Do not put the FOMA terminal in the When using the phone in a medical facility, place such as the dashboard near the be sure to observe the regulations of the air-bag, where the influence of air- facility.
Page 17: Handling Battery Pack
However, you could be injured if you touch a sharp edge. WARNING Do not leave the FOMA terminal for a long time in a location where direct If the battery pack's fluid contacts sunlight enters the lens of the built-in skin or clothes, immediately flush the camera.
Page 18: Handling Optional Devices (Ac Adapter/Dc Adapter/Desktop Holder/In-Car Holder)
DoCoMo Shop. If your local municipality If incorrect voltage is used, this may cause has a battery recycling program, dispose of fire or failure. When using FOMA terminal them as provided for. overseas, use FOMA domestic/overseas AC adapter 01.
Page 19: Handling Uim
CAUTION The FOMA terminal's signals may affect the operation of implanted pacemakers or Always remove the plug from the defibrillators, and other devices. cigarette lighter socket when Obey the following rules inside cleaning the equipment.
Page 20: Handling Instructions
- FOMA terminal, battery pack, adapter (including I Do not sit down with FOMA terminal in a back battery charger) and UIM are not waterproof. Do not pocket. Do not place it at the bottom of a full bag use FOMA terminal in bathrooms or other high- or anywhere it will encounter excessive force.
Page 21 I To preserve the environment, bring the old UIM place avoiding direct sunlight. - Remove the battery pack from the FOMA terminal and to a sales outlet such as DoCoMo Shop. I Avoid temperature extremes.
Page 22: Intellectual Property Rights
Adobe Except for the case protected by copyright laws Systems Incorporated. Flash, Flash Lite and such as personal use, use of FOMA terminal to Macromedia are trademarks or registered reproduce, alter, or publicly transmit recorded trademarks of Adobe Systems Incorporated in pictures or sounds, or copyrighted text, images, the US and other countries.
Page 23 I Other company and product names mentioned I Licensed by QUALCOMM Incorporated under in this manual are trademarks or registered one or more of the following United States trademarks of their respective holders. Patents and/or their counterparts in other I The following abbreviations of operating nations;...
Page 24: Basic Package And Optional Accessories
USB cable (Sample) (including operation manual) Note: Available for operations using "USB cable" described in this manual. <Optional accessories> Desktop holder F14 FOMA AC adapter 01 (including Battery pack F09 the written warranty, operation (including operation (including operation manual) manual)
Page 25 Names and functions of parts ..................24 Swinging display ......................26 Display overview......................28 Selecting functions from menu ................... 31 Using UIM (FOMA card) ....................35 Attaching/removing battery pack................37 Charging mobile phone battery .................. 38 Checking remaining battery level ...........
Page 26: Names And Functions Of Parts
Names and functions of parts This section describes the F903i part names and the major functions assigned to keys. I For descriptions on operations, keys are indicated by graphical symbols explained here. Size (mm) 102 (H) x 50 (W) x 24 (T) (Unit: mm, Folded) Weight (g) Approx.
Page 27 Pressing and holding this key for 1 second or Pressing and holding this key for 1 seconds or more more start/cancel IC card lock. with FOMA terminal folded start/cancel IC card lock. B microSD memory card slot Note: Notation of the icon may vary depending on the...
Page 28: Swinging Display
E Strap opening Music player. F MMusic key G Side keys [ Main operations available with side keys Open : FOMA terminal open Folded : FOMA terminal folded Operation Status Function Main status of FOMA Terminal for operation Side key [...
Page 29: Wide Display
*: HTML mail does not appear fully on Horizontal display. The Compose new message screen does not appear in wide display. Swing display with FOMA terminal folded With FOMA terminal reversed, swing the display a maximum of 90 degrees to the right or left. I During Swing display, keys other than P, M, or side keys [ ] are unavailable.
Page 30: Display Overview
Display overview The descriptions of icons indicated on the display are shown below: Horizontal display I In wide display, a-k appear on the top of the screen. Note that, items d-k do not appear during display of Full Browser, i-αppli or PDF data. Vertical display : Battery icon : Unread i-mode mail and SMS exists...
Page 31: Task Area
: New arrival : Displaying available multi-cursor key In Swing display with FOMA terminal folded, in Focus mode a number in the icons given below show the : Lock on close ON P153 number of newly arrived information items. : microSD memory card inserted and : Missed "Communication mode"...
Page 33: Selecting Functions From Menu
List screen When a list extends to multiple pages, the currently displayed page number and the total number of pages are displayed. indicates that other selectable items exist above and below the item at the cursor position. Press j to move the cursor. When d is pressed on the last item of the page, the next page appears.
Page 34 Selecting menu items by key (Shortcut operations) Each menu item has a number (item number). The menu icons can be selected by pressing the related keypads (0-9). This manual uses item numbers for short-cut operations to describe operation steps. Note that item numbers differ when Normal of Menu setting is set to "Simple display". I For item numbers, see "Menu list".
Page 35 To return to stand-by display or previous menu After selecting a menu item, you can return to the stand-by display or previous menu by pressing the keys below. f : Returns to the stand-by display. c : Returns to the previous menu. When the menu is displayed in "List view" or "Simple display", you can return to the previous menu by pressing l.
Page 36 The operation can be performed similarly also when icon ( ) indicating success/failure of pattern data automatic update or icon ( ) indicating that FOMA terminal is connected to an external device with USB cable has appeared. To cancel Focus mode, press c or f.
Page 37: Using Uim (Foma Card)
Select "Yes" to delete the display. In Focus mode, you cannot display the menu by pressing m. When FOMA terminal is folded, newly arrived information can be checked by pressing side key [ ]. The light flashes 5 times in blue and the vibrator operates 5 times when there is newly arrived information or the light flashes 2 times in red when not.
Page 38 No LCS client can be added to or deleted from LCS clients list unless UIM is inserted to FOMA terminal. When UIM is replaced with another one, Cookie set/delete is set to "Invalid" and Access setting set to "No" in Full Browser.
Page 39: Attaching/Removing Battery Pack
You do not need to apply to use WORLD WING. Note-1: If you subscribed to FOMA service on or after September 1, 2005, separate subscription is not required to use WORLD WING. Note that, if you declined to use WORLD WING at subscription to FOMA service, you need subscription.
Page 40: Charging Mobile Phone Battery
After charging has completed with FOMA terminal power ON, the power is supplied to the terminal from the battery pack. If FOMA terminal is left in that state for a long time, the battery pack may run out causing the low battery alert to sound after using only a short period of time. In such a case, remove FOMA terminal from the AC adapter, desktop holder or DC adapter and then reconnect it and charge the battery again.
Page 41 The charging may not be completed depending on the settings of Display light or charging method, such as charging the battery with the FOMA terminal open when Normal use is set to "Always" in Display light time of Display light. In such a case, it is recommended to charge the battery with the FOMA terminal folded.
Page 42 Applying an excessive force to disconnect the connector may give damage to it. When FOMA terminal is not used or you are leaving the car, disconnect the cigarette lighter plug of the DC adapter from the cigarette lighter socket and disconnect the DC adapter connector from FOMA terminal.
Page 43: Checking Remaining Battery Level
Remaining battery level Checking remaining battery level A battery icon appearing in the top of the display shows an approximate remaining battery level. Battery icon Icon Battery 3 (ample charge) 2 (low charge) 1 (Battery level very level low. Charging required.) Battery level icon change procedure P121, P133, P134...
Page 44: Switching To English
(power saving mode). In power saving mode, the light flashes in green at approximately 6-second intervals. This is the same during a voice call or while the display is swung with FOMA terminal folded. The display light is turned on again if there is any operation or incoming call.
Page 45: Setting Date And Time
INFORMATION With Auto time adjust set to "ON", the time or time difference is corrected when FOMA terminal is turned ON or at other timings. Note that, with no UIM inserted or for some signal conditions, the time is not corrected. During execution of certain i-αppli, time correction may be disabled.
Page 46: Notifying Your Phone Number To The Other Party
Caller ID notification (Activate/Deactivate) Notifying your phone number to the other party You can set FOMA terminal to display your number (Caller ID) on the other party's terminal when you make a voice call or videophone call. Setting to either notify/not notify caller ID all at once I For details, see "Mobile Phone User's Guide [Network services]".
Page 47 Switching between voice/videophone call when receiving a call ......64 Enabling use of keypad to answer call ..........Any key answer Ending/putting on hold/continuing a call by folding FOMA terminal Close settings Adjusting volume of the other party's voice during a call....
Page 48: Making Voice/Videophone Calls
Videophone The videophone function is available between terminals that support DoCoMo's videophone. Phone conversations can be made between FOMA terminals while looking at the other party's image using videophone. It is also possible to send still images, substitute images, Chara-den, etc. instead of camera image.
Page 49 *: This message may also appear during packet communication depending on the other party's terminal. When making a videophone call to FOMA terminal which supports videophone call, the recommended communication speed is 64K. Videophone via 32K line is intended for connection with devices such as PHS with which videophone calls via 64K line may not be available depending on the network condition.
Page 50 - If a videophone call accompanied by a Chaku-moji message is made, the message also accompanies the redial. Any videophone call from FOMA terminal to emergency call (110, 119 or 118) with Auto redial as voice set to "ON" is automatically switched to a voice call.
Page 51: Speakerphone Function
When the call is switched to use the speakerphone function, the volume may suddenly increase. Use it with FOMA terminal away from your ears. Talk to the FOMA terminal within approximately 50 cm. If a call is hard to hear from the speaker due to loud noise around you or the other party, turn the speakerphone function OFF.
Page 52 Switching to videophone call during a voice call During a call, aeSelect "Yes" Appears when the other party supports call switching During call switching, a message indicating to switch the call is played. Select "No" to return to the voice call screen. Start talking when the other party's image appears on the screen.
Page 53: Making A Call Using Redial/Received Calls
The settings such as camera switching, frame selection, substitute image sending, etc. made during videophone call are canceled by each switching between the voice call and videophone call. Redial/Received calls MENU 46/45 Making a call using Redial/Received calls This function records call log (Redial) and Received calls of voice/videophone and PushTalk calls.
Page 54 *1: Not displayed unless time correction or calling date/time recording is not performed. *2: Displayed the phone number icon and name of the first member in the member list when a PushTalk call is made to multiple members. *3: Displayed when dialed to a PushTalk group. *4: Member number/number of members are displayed for PushTalk.
Page 55 Using Redial/Received calls Adding to phonebook : a Place the cursor on a party to add and me4e1 or 2 b 1 or 2 To add data to an existing phonebook entry, select the phonebook entry in the memory to save. c Save the name or mail address, etc.
Page 56: Using Chaku-Moji
INFORMATION When operating from details screen, press m and select "Delete" "One item" or "All items". Chaku-moji Using Chaku-moji When making a voice or videophone call, a message can be sent in a ring time to inform the receiver of the purpose and urgency of the call. I This function is not available for PushTalk.
Page 57 When operating from the recorded message list, voice memo list or Members screen of schedule, press m and select "Call option". When operating from Phonebook list of FOMA terminal or UIM, press m and select "Mail/Call option" "Call option"; when operating from phone number details screen, press m and select "Chaku-moji/MultiNo"...
Page 58: Setting To Either Notify/Not Notify Caller Id For Each Call
Sending tone signal (DTMF) Tone signals (DTMF) can be sent from FOMA terminal to operate the Voice Mail service or use various push-button phone services at your home. By entering pause ("P") or timed pause ("T") when making a voice call, tone signals (DTMF) can be sent with digits in the...
Page 59: Making A Call Under Set Conditions
When operating from the recorded message list, voice memo list, redial, received call list or Members screen of schedule, press m and select "Call option". When operating from Phonebook list or Phone number detail screen of FOMA terminal or UIM, press m and select "Mail/Call option"...
Page 60: Making International Calls
I "WORLD CALL" charges are added to the FOMA service charges every month. I No subscription charges apply. No monthly fee is required. Note: You are subscribed to "WORLD CALL" at the time of subscription to the FOMA service (unless you request not to subscribe to it).
Page 61: Changing International Call Assist Settings
Select the Intn'l prefix fieldeSelect a name of international access code Select the Country code fieldeSelect a country codeem Select "Yes". When "No, use original" is selected, a call is made under such conditions that the settings other than "Chaku-moji" or "Call type" are canceled. Int'l call assist Changing International call assist settings Setting Auto switch <Auto switch>...
Page 62: Setting Prefix To Be Added Before Phone Number
Setting international prefix number <Auto assist setting> I Up to 3 codes can be registered. me8923 Select "<Not recorded>". Selecting an international prefix number to be automatically converted : Place the cursor on an international prefix number to be automatically converted to and press p. appears before the selected number.
Page 63: Suppressing Ambient Noise To Improve Call Quality
When the setting is made to emit ring alert from a handsfree-compatible device, the ring alert of a handsfree- compatible device sounds regardless of the settings of Silent mode or Ring alert setting on the FOMA terminal. When the setting is made to emit sounds from a handsfree-compatible device, the call continues even when FOMA terminal is folded, regardless of settings in Close settings.
Page 64 Reading incoming call screen The other party's phone number, name, image, movie/i-motion, Chaku-moji message, etc. may be displayed on the screen according to the sending condition of the caller and FOMA terminal settings. When the other party notifies caller ID...
Page 65 INFORMATION When a call forwarded from FOMA terminal is received, the phone number appears in the lower-left corner of the incoming call screen if the forwarder's phone number is not saved in the phonebook or the name appears if the forwarder's phone number has been registered.
Page 66: Switching Between Voice/Videophone Call When Receiving A Call
Switching between voice/videophone call when receiving a call When a caller of the current voice (videophone) call has switched to videophone (voice) call, a receiver must react to it. I Call switching can be done only from the terminal that has made the call. I To react to switching to voice or videophone call, Notify switchable mode must be started in advance.
Page 67: Listen Volume
Continue (mute) : Continues the call. INFORMATION When the FOMA terminal is folded in the following cases, the call continues regardless of setting in this function: - When a flat type earphone/microphone set with switch (optional) is connected. - When a handsfree-compatible device is connected and the setting is made to emit sounds from the connected device.
Page 68: Respond And Hold
I The caller will be charged for the time spent on hold. While receiving a call, f. FOMA terminal is put on hold. The other party hears a status message. For a videophone call, Response hold image for videophone is displayed to you and the other party.
Page 69: Setting Status Message
Status message Setting status message Default On-hold tone: Standard (I cannot answer to the phone right now. Please wait or call back later. (in Japanese)) You can record a status message in your own voice. I 1 message approximately 10 seconds long can be recorded. I While a voice or a videophone call is on response hold, the status message set by this function is heard.
Page 70 When you receive a PushTalk group call, appears on the terminal displays of the participants. In any cases, your FOMA terminal does not answer the incoming call. The stand-by display shows (icon indicating the number of missed calls), which is recorded as a missed call in Received calls.
Page 71: Using Public Mode (Power Off)
Service When a voice call is received When a videophone call is received Caller ID request When the other party has not notified When the other party has not notified service the phone number, the call is the phone number, the call is disconnected after an announcement disconnected after an announcement asking for caller ID notification is played...
Page 72: Answer Machine
I Write down the contents of recorded message separately in a notebook, etc. recorded data may be lost due to failure, repair or modifications of FOMA terminal. If recorded data should be erased, DoCoMo assumes no responsibility for the loss of any data.
Page 73 For a videophone call, press n or t to send a camera image or press a to send a substitute image. The contents of the recorded message before receiving the call are not recorded. When the FOMA terminal is out of service area or turned OFF, answer machine does not operate. Use Voice Mail service.
Page 74: Playing/Deleting Recorded Messages
Select "Record" in the Edit message fieldeRecord the greeting message after the beep Recording will start after a message is displayed. Supplementary description of recording message P67 Step 3 in "Setting status message" An approximate guide of the time for recording Press p [Set].
Page 75: Using Chara-Den
During playing, the following operations are enabled: j/Side keys [ Adjusts volume Stop Switches the speakerphone function ON/OFF (only when playing voice call message) When videophone call message is being played, the speakerphone function is set to ON. Switching the speakerphone function is not available. When videophone call message is played with Silent mode ON, a confirmation screen appears asking whether to play sound.
Page 76: Setting Images To Send To The Other Party
I A still image or Camera-Off image cannot be set while frame is being sent. I Only still images that are 176 x 144 or smaller for Image size and permitted to output from the FOMA terminal can be set.
Page 77 Applying special effects to image <Scene mode/effect> You can apply the following effects on an outgoing image. Effects can be applied only while camera image is being sent. During a call, me2e1-6 Standard : Sends standard image. Sunset : Used when shooting subjects against sunset glow. Backlight : Used when shooting subjects against the light.
Page 78 INFORMATION Even when you switch cameras, the following settings are kept: - Frames - Scene mode/effect - Brightness/density/flicker Switching to Macro shooting Switch to Macro shooting to adjust the focus when sending images of objects 8-11 cm away. I Macro shooting can be switched only on the use of out-camera. During a call, me6 Press m6 to cancel Macro shooting.
Page 79: Customizing Display Settings For Videophone Call
Customizing display settings for videophone call Switching between the main screen and sub screen Default Main screen: Other side Sub screen: My side I The settings are retained even after a call. During a call, p [Change]. Displayed images switch alternately with every press. Main : Other side/Sub : My side Main : My side/Sub : Other side Changing main screen size...
Page 80: Setting Substitute And Hold Images For Videophone Calls
- Still images with size larger than 176 x 144 - Animation and created animation - Still images in formats other than JPEG and GIF - Images that inhibited to output from FOMA terminal P344 "File restriction" in "List of display items and changeability" Setting substitute image <Example>...
Page 81: Setting About Switching Between Voice Call And Videophone Call
I During a voice or videophone call, the settings for Notify switchable mode cannot be changed. I Setting operations for this function is disabled from a location out of service area. Operate FOMA terminal in locations with better radio wave condition.
Page 82: Setting How Videophone Call Are Handled While Using I-Mode
(commercial) such as an earphone/ microphone and USB-compatible Web camera. I This function is unavailable when FOMA terminal is not connected with the external device. I See the instructions manual of external devices for hardware requirements, setting or operating instructions of videophone applications.
Page 83 PushTalk PushTalk ........................82 Making PushTalk calls ....................82 Adding members during PushTalk session..............84 Receiving PushTalk calls ....................85 Adding entries into PushTalk phonebook ..............86 Making PushTalk calls using PushTalk phonebook........... 87 Deleting PushTalk phonebook entries................ 88 Setting for making and receiving PushTalk calls............88...
Page 84: Pushtalk
PushTalk You can communicate with multiple parties (a maximum of 5 parties including yourself) by a simple operation; that is, just pressing the PushTalk key (P) to invoke a PushTalk phonebook, selecting the parties and pressing P again. Every time you press P and speak, PushTalk communication fee is charged.
Page 85 When you end the session, f. INFORMATION To make PushTalk calls, operate FOMA terminal in open state. You cannot make a PushTalk call with the FOMA terminal folded. Time per keeping taking the floor is limited. When the floor is taken for a long time, the floor release notice sound is heard and the floor is released.
Page 86: Adding Members During Pushtalk Session
An addition method selection screen appears. Select "View PT ph.book", "View phonebook" or "View call records" to display a PushTalk phonebook member list, FOMA terminal phonebook list (Japanese syllabary order) or redial list, respectively. Select "View call records" and press p on redial list screen to display a received call list.
Page 87: Receiving Pushtalk Calls
A member using a PushTalk compatible terminal other than 903i series can also be added. If additional member's FOMA terminal is inapplicable to PushTalk member addition, that member does not appear as a participating member and connecting tone and disconnection sound are not generated.
Page 88: Adding Entries Into Pushtalk Phonebook
Adding entries into PushTalk phonebook You can add members to make PushTalk calls. You can group the members while adding. I Before adding members to the PushTalk phonebook, saving the phone numbers to the FOMA terminal phonebook is needed. I Up to 700 members can be saved. (This number may be reduced depending on the saved contents.) Select "View phonebook".
Page 89: Making Pushtalk Calls Using Pushtalk Phonebook
I You can select up to 4 members to make a call. Making a call from member list Press P. Name saved in the FOMA terminal phonebook The phonebook entries of the member list are displayed in the following order of the reading:...
Page 90: Deleting Pushtalk Phonebook Entries
Default Hide caller ID Set whether or not to display your and/or other members' phone numbers on the FOMA terminal of individual members in making a PushTalk call or adding members. I Caller ID is your important information. Carefully consider whether you want to include caller ID information when you make a call.
Page 91 me8633e1 or 2 INFORMATION Phone numbers of the members are notified according to the setting for this function regardless of the setting in Activate/Deactivate of Caller ID notification. Caller ID notification priority If multiple methods of notifying a caller ID are set simultaneously, the caller ID operations are performed with the priorities given below.
Page 92 When a flat type earphone/microphone set with switch (optional) or In-Car Hands-Free Kit 01 (optional) is connected, the talk session continues with FOMA terminal folded regardless of this setting. When making these settings during a PushTalk call, press m and select "Setting when folded"...
Page 93 Phonebook Phonebooks supported by FOMA terminal..............92 Adding entries into FOMA terminal phonebook ...... Phonebook new entry Setting receiving actions for each phonebook entry ......Alert by contact Adding to UIM phonebook ..........Phonebook (UIM) new entry Making group settings ................
Page 94: Phonebooks Supported By Foma Terminal
*2: Items that can be set are birthday, note, postal code/street address, location information, company name, job title and URL. I Phonebook data saved in your UIM is available even when it is inserted to another FOMA terminal. Name displays When making a call for a party saved in FOMA terminal phonebook or UIM phonebook, the name and phone number saved in the phonebook are displayed on the calling, ringing and talking screen.
Page 95: Adding Entries Into Foma Terminal Phonebook
Data Security Service, you can save the data in the Data Center. I The phonebook data that is saved in the FOMA terminal can be backed up to a microSD memory card. I Data may be lost due to failure, repair or modifications of FOMA terminal. DoCoMo assumes no responsibility for accidentally erased data.
Page 96: Alert By Contact
Setting receiving actions for each phonebook entry Operations such as ring alert and light alert can be set for each phonebook entry saved in the FOMA terminal phonebook. peSearch the phonebookePlace the cursor on a phonebook entry to set and me32eSelect and set the required items belowep [Save] The Call and Mail screens can be switched to each other with h.
Page 97: Adding To Uim Phonebook
Ring alert : Select "Movie ringtone", "Melody" or "Music" to set ring alert. Only movies/i-motion and Music with Ring alert of the detail information specified to "Available" can be set as ring alert. When "Terminal setting" is set, the operation depends on Call ring alert or Mail/Msg ring alert.
Page 98: Making Group Settings
Group setting Making group settings FOMA terminal phonebook allows you to add groups or set incoming/outgoing operations for individual groups. Also you can change the order of the groups or delete groups. UIM phonebook allows changing only the group name.
Page 99: Making Calls Using Phonebook
Phonebook search Making calls using phonebook A call can be made simply by calling up the phonebook entry from the FOMA terminal phonebook or UIM phonebook for the party to call. I Operation of PushTalk call using PushTalk phonebook or FOMA terminal phonebook...
Page 100 Displaying sites : Select the desired entryeh to display the URL detail screenegeSelect "Yes" Press t after g to display with Full Browser. Using Location information : Select the desired entryeh to display the location information detail screeneg GPS location information screen appears. P291 Place the cursor on a phonebook entry to attach and me1 Attaching phonebook data to mail :...
Page 101 Searching person frequently talked with or sent mail to/received mail from <Search by freq> In the FOMA terminal phonebook, total number of calls, date and time of last call, total number of messages, and date and time of last message are recorded for each phonebook entry. Based on the information, phonebook entries can be sorted by the number of calls that took place (Call rank log) and by the number of i-mode mail messages exchanged (Mail rank log).
Page 102 When Accept/Reject call, Caller ID settings or Secret code is set for the phonebook data, indicated on the right of the phonebook number. FOMA terminal phonebook details screen (Phone number) a Phonebook No. b Name and reading...
Page 103: Editing Phonebook Entries
A confirmation screen is displayed asking to select a saving method. Select Overwrite or New entry. If the phonebook number of FOMA terminal phonebook entry is changed to overwrite the one already used, the entry already saved on the number is deleted.
Page 104 The positions of the selected phone number and first phone number are switched. Switching phonebook numbers The order of 2 phonebook numbers of entries saved in the FOMA terminal phonebook can be switched. peSearch the phonebookePlace the cursor on a desired entry and Select a phonebook entry to switch the phonebook number.
Page 105: Copying Phonebook Entries
Copying phonebook entries Entries in FOMA terminal phonebook are copied to UIM phonebook and from UIM phonebook to FOMA terminal phonebook. I The FOMA terminal phonebook also can be copied into microSD memory card. P333 I If the entries of the phonebook contain the same group name as that in a copy destination phonebook, the data will be copied to that group.
Page 106: Deleting Phonebook Entries
Data Security Service Storing (restoring or updating) phonebook in Data Center This service saves all entries of FOMA terminal phonebook to Data Center. When phonebook entries are already saved in Data Center, only the difference is updated. In case data saved in FOMA terminal is lost by misplacement, wetting or other reasons, you can restore saved data from Data Center through i-mode operations.
Page 107: Setting Functions For Phonebook Entries
Setting functions for phonebook entries I These functions cannot be set for the phonebook entry in UIM phonebook. Setting Show/Hide caller ID to each phone number <Caller ID settings> I Priority of the method to notify a caller ID peSearch the phonebookePlace the cursor on a phonebook entry to set and me352eAuthenticateeSelect a phone numbere INFORMATION...
Page 108: Making Phonebook Entries Secret
Checking number of phonebook entries The number of entries saved in phonebook, that with secret attribute set, etc. are displayed. I The number of FOMA terminal phonebook entries with secret attribute set is displayed only in Secret mode. peSearch the phonebookeme92...
Page 109: Using Simple Dial To Make Calls
First phone number Using Data Security Service This service saves all entries of FOMA terminal phonebook to Data Center. When phonebook entries are already saved in Data Center, only the difference is updated. In case data saved in FOMA terminal is lost by misplacement, wetting or other reasons, you can restore saved data from Data Center through i-mode operations.
Page 110 - Even for an incoming call from a caller saved in the phonebook, the caller's phone number, not the name and image, appears. The ring alert, vibrator and other functions operate as set in the FOMA terminal, but not as set in the phonebook.
Page 111: Sounds Settings
Setting alarm for reconnecting interrupted call ......Reconnect alarm Making FOMA terminal silent..............Silent mode Displays/Lights settings Coordinating FOMA terminal screen ............Style theme Changing settings such as stand-by display depending on the lifestyle Timed theme Changing stand-by display ..............
Page 112 Setting operations collectively for incoming calls and mail/messages You can set operations for incoming voice calls, videophone calls, mail, chat mail and MessageR/F. I Settings for Ring alert, Show image, Vibrate alert or Light alert are reflected to Call ring alert, Mail/Msg ring alert, Incoming call and Videophone receiving of Call image, Vibrate alert/effect or Light alert, respectively.
Page 113 Default Alert setting: Same:Mail setting I If the FOMA terminal is open while Chat mail is activated, ring alert or vibrator does not operate even when chat mail, mail or MessageR/F is received. ae92eSelect and set the required items belowep [Record] Alert setting : Set whether to set the operation for incoming chat mail or follow the mail incoming settings.
Page 114: Ring Alert
Sounds settings Call ring alert/Mail/Msg ring alert Changing ring alert for calls and mail/messages Default [Call ring alert] Phone: Melody/ (Tone1) [V.phone ring alert] Videophone: Melody/ (Harp) [P-Talk ring alert] PushTalk: Melody/ (Tone3) [Mail ring alert, Msg. R ring alert, Msg. F ring alert] Mail, MessageR, MessageF: Melody/ (Tone2) [Chat M ring alert] Chat mail: Sync msg alert I When a movie/i-motion is set as a ring tone, a movie and/or sound is played for incoming phone call or...
Page 115 For some Music, Setting is may not be set for Ring alert. I Music saved in microSD memory card can be set as a ring alert after it is moved to FOMA terminal.
Page 116: D Sound
Using the 3D sound function, very realistic i-αppli games and ring alerts and i-motion can be enjoyed. The most realistic 3D sound can be enjoyed when FOMA terminal is held in front of the listener's face approximately 20-30 cm away (varying between individuals).
Page 117: Adjust Volume
Alarm sound Setting alarm sound for Alarm clock and Schedule reminder Default [Alarm clock sound] Melody/ (Alarm clock) [Schedule reminder] Alarm on time: Melody/ (Set time arrives) Alarm in advance: Melody/ (It's almost schedule time) You can set a sound to be emitted when Alarm sound is set to "Terminal setting" from the set sound screen of Alarm clock when Alarm on time or Alarm in advance of Reminder is set to "Terminal setting"...
Page 118: Vibrate Alert/Effect
Press 5 . Setting the vibrator used for i-αppli : Vibrator is set and FOMA terminal vibrates on the incoming call/message and alarm notification. When "Pattern A" is set, the vibrator operates as follows: 0.5 second vibration 0.5 second pause 0.5 second vibration...
Page 119 Default Electronic You can change the sound to be emitted when a key is pressed, FOMA terminal is opened or folded or the display is swung. Emission of the sound can also be inhibited. I The keypad, terminal open/close and display rotation sounds are different from each other depending on the type of set sound.
Page 120 me8115e2 or 3e1-5 Press j to emit shutter sound of the cursor position. Charge alert Setting alert sound for charging Default You can set whether to activate the battery charged sound at the start and end of charging. me8116e1 or 2 INFORMATION The alert sound for charging does not sound in the following situations even when this function is set to "ON": - Silent mode ON...
Page 121: Keypad Sound
When General silent mode is activated An incoming call is notified with vibration, muting all sounds to be emitted from FOMA terminal such as ring tone, keypad sound, display swinging sound, Alarm. Microphone is sensitized so that a call can be made in a small voice.
Page 122 When Personalized silent mode is activated Operations are performed according to Vibrate alert, Operation sound, Call alert volume, Mail alert volume, ToruCa alert volume, GPS alert volume, Low Battery Alert, Alarm sound, Schedule sound, i-αppli sound and Sensitize microphone settings made for Personalized silent mode in Silent mode. INFORMATION Note that the following sound, except for Chara-den recording sound, is emitted in Silent mode ON: - Shooting confirmation sound for shooting with still image or movie (shutter sound)
Page 123 The stand-by display, menu icons, clock style and battery icon on the display and signal level icon have designs coordinated with the FOMA terminal color. You can change to other style theme which has been coordinated with other terminal color. In addition, "AdvancedMode"...
Page 124 Creating original style theme The setup items can be customized to create 3 original style themes. I For (Customize 1-3), "Bianco" is set by default. me831 Place the cursor on a title name from 7-9 and peSelect and set the required items belowep [Set] Title : Enter a title for the style theme.
Page 125: Stand-By Display
Image, movie/i-motion or Chara-den downloaded from an i-mode site or still image or movie shot with the FOMA terminal can be set as the stand-by display. Animations or created animation can also be set. I Still image, animation and created animation can be set on a Horizontal position.
Page 126 Side keys [ Adjust volume I The following operations are available for GIF animation, created animation or Flash graphic: Opening the FOMA terminal/Turning the display/Returning to the stand-by display/Turning power on Play Pause/Play I The following operations are available for Chara-den:...
Page 127: Info/Calendar Layout
peSelect "Yes" If i-αppli stand-by display has already been set, a confirmation screen asking whether to terminate the i-αppli stand-by display is displayed. INFORMATION The following images cannot be displayed: - Created animation - GIF animation - Flash graphics When no still image can be displayed because some specified folders are deleted or still images saved in the folder have been deleted/moved or Create animation is performed, the image set by default will appear on the stand-by display and random image setting returns to the default.
Page 128 me8215 Press 1. Press 2 to cancel customization of the display. If "Kisekae Tool" is already set, select "YES" on a confirmation screen asking whether to cancel Kisekae Tool. h to switch patternseSelect an areae1-6 If there are multiple areas, select an area and press 1-6 repeatedly. Calendar cannot be set for a smaller area of half the size of the screen (Set Area1 of Pattern 3, etc.).
Page 129 New arrival Items set in New arrival are listed starting with the most recent item. If an area is selected, the list screen of the first item is displayed. Unread message The reception date and time and the first part of subject are displayed.
Page 130 Outgoing images set in multiple functions are displayed in the following priorities: a Image saved in the FOMA terminal phonebook b Alert/image by group of the FOMA terminal phonebook c Outgoing call/Videophone dialing (V.phone dialing img.) *: When Contact image is set to "ON", it is effective.
Page 131 Incoming images set in multiple functions are displayed in the following priorities: a Incoming calls melody setting of Multi number b Image saved in the FOMA terminal phonebook c Alert/image by group of the FOMA terminal phonebook d Call ring alert /V.phone ring alert /Call alert (Incoming call)/Videophone alert (Videophone receiving) *1: When Contact image is set to "ON", it is effective.
Page 132 Setting Contact image display from Phonebook at incoming/outgoing call Default You can set whether to display the image saved in the FOMA terminal phonebook for incoming/outgoing voice calls/videophone calls. I The image saved in Phonebook is displayed when the recorded person calls with the caller ID.
Page 133 Display light Setting display and key light Setting lighting time <Display light time> Default Normal use: 10 sec AC adapter connected, i-αppli: Terminal setting i-mode session, Camera session, Movie camera session, i-motion: Always on The lighting time of display can be set. When the light is ON, the display becomes brighter and key area is lit in red.
Page 134 Menu setting MENU 8221 Changing design of menu Default Normal: Animation Custom: Tile display Type of animation: Style theme default Describe function: ON Icon display effect: OFF Default MENU: Normal Active shortcut: Custom The menu display format or icon design can be changed or an original menu can be created. I When Normal is set to "Simple display", Select language is disabled.
Page 135 Select CustomizeeSelect a functioneSelect an image on Image Folders Menu icons of other functions are set in the same way. To cancel menu icons, place the cursor on the icon to cancel, press m1 and select "Yes". To cancel all menu icons, press m2 and select "Yes". aeSelect a background image for the menu screen on Image Folders To cancel a background, press m4 and select "Yes".
Page 136 Viewing Kisekae Tool settings me57 Select Kisekae Tool. The list of the contents saved in Kisekae Tool is displayed. Place the cursor on Kisekae Tool and a. Displaying the preview image of Kisekae Tool : You may also press p on the preview screen to set Kisekae Tool. Place the cursor on Kisekae Tool and me21eSelect "Yes"...
Page 137: Light Alert
Default You can set whether to indicate unchecked missed call (voice/videophone call) or unread information (message/chat mail/SMS), if any, by flashing the light while FOMA terminal is being folded. me826e1 or 2 When there are unchecked missed calls with this field set to "ON", the light flashes at intervals of approximately 6 seconds according to Light color for Call in Light alert.
Page 138 Light with Light pattern and Light color for Light alert set in multiple functions operate in the following priorities: a Alert by contact of the FOMA terminal phonebook b Alert/image by group of the FOMA terminal phonebook c Light alert/Call alert/Videophone alert/Mail alert/Chat mail alert Setting lighting color and pattern during a call/IC card transaction <Call session light/IC card light>...
Page 139: Font Size
FOMA terminal. - The lighting color and/or brightness differs among FOMA terminals or depending on LEDs. - The actual lighting color may seem to discord from the lighting color name depending on FOMA terminal. Font style...
Page 140: Setting Clock Display
- When the i-αppli stand-by display is displayed During All lock or Omakase Lock ON, the clock is displayed at the "Top" regardless of the layout setting. Two time zone clocks settings are used when using FOMA terminal overseas. P426...
Page 141 Safety Settings Security code Security code available with FOMA terminal ............140 Changing terminal security code ........Terminal security code change Setting PIN code ......................142 Unblocking PIN/PIN2 code................... 143 Using fingerprint authentication function..............143 Restricting mobile phone operations Various lock functions....................147 Preventing unauthorized use................
Page 142: Security Code Available With Foma Terminal
A 4-digit "i-mode password" is required to store or delete sites in My Menu or apply to or cancel Message Service or i-mode pay sites. The codes are set to "0000" at the subscribed to the FOMA. You can change this to 4-digit code.
Page 143 (4-8 digits). P142 PIN code is a number (code) to be entered each time UIM is inserted or FOMA terminal is powered ON to confirm the user and to prevent unauthorized use of FOMA terminal. Making/receiving calls and terminal operations are enabled after entering PIN code.
Page 144: Setting Pin Code
When PIN code ON/OFF is set to "ON" When the FOMA terminal is powered on, the PIN code entry screen is displayed. The stand-by display appears when correct PIN code is entered, but all operations are disabled when not.
Page 145: Unblocking Pin/Pin2 Code
I Be sure to keep a separate note of the number. If the PUK has been forgotten or PIN code has been fully locked, you need to bring a document (such as a driver's license) for identifying that you are a subscriber, FOMA terminal and UIM to a DoCoMo Shop. <Example> Unblocking PIN code On the confirmation screen of the PUK, geEnter the PUK (8 digits) Enter a new PIN code in the New PIN code entry field.
Page 146 Put the finger off from the fingerprint sensor and retry the operation. I When connecting FOMA terminal using a USB cable to a device which requires grounding such as a desktop PC, make sure that the device is grounded in advance. If the connected device is not grounded, fingerprint authentication may be disabled.
Page 147 (such as a driver's license) for identifying that you are a subscriber, FOMA terminal and UIM to a DoCoMo Shop. For the handling, see "Precautions for using fingerprint authentication function ( P143)"...
Page 148 Authenticating fingerprint When the fingerprint authentication screen is displayed, slide your fingertip on the fingerprint sensor. Fingerprint When Fingerprint authentication access is selected For fingerprint authentication, press the finger set for use against the fingerprint sensor. If the authentication is failed, remove the finger from the fingerprint sensor and retry authentication.
Page 149: Various Lock Functions
Restricting mobile phone operations Various lock functions A variety of lock functions are available to prevent FOMA terminal from being used by others improperly or to keep your private information and phonebook entries confidential. You can choose the function to suit your needs.
Page 150: Omakase Lock
Even with various lock functions set, Omakase Lock takes precedence over them. Omakase Lock is unavailable when FOMA terminal is misplaced with its power OFF, put outside the service area or in Self mode.
Page 151: Preventing Making/Receiving Calls
Omakase Lock is a service that locks FOMA terminal on request from the subscriber of UIM installed in it. The FOMA terminal is locked on request from the subscriber even when the holder of FOMA terminal is different from the subscriber.
Page 152: Prohibiting Keypad Dial
LCS clients is disabled. Privacy mode Preventing unauthorized use of Phonebook and Mail You can prevent unauthorized use of FOMA terminal phonebook, Mail, My Picture, etc. Setting Privacy mode operation Default Phonebook & Logs, Mail, My Picture, i-motion, Schedule, i-αppli, Loc. history (GPS): Show all Auto start: OFF When using Phonebook, Mail or My Picture, you can set whether to perform authentication.
Page 153 PushTalk phonebook does not. The ring alert, vibrator or Substitute image set in Authorized access Phonebook do not operate; they operate as set in FOMA terminal. In addition, Ring alert delay is also activated by reception from a party registered in the phonebook.
Page 154: Disabling Display Of A Caller's Or Sender's Name, Etc. Of A Call Or Mail Received
Still images or movies with frames cannot be shot. Even when data items in FOMA terminal phonebook are copied or backed up to the microSD memory card, still images set in the FOMA terminal phonebook will not be copied or backed up.
Page 155: Side Key Hold
FOMA terminal is folded. When Lock on close is started Each time the FOMA terminal is folded, Lock on close on time set in Lock after phone close and locks the ], P and M. Pressing side key [...
Page 156: Secret Mode
3 seconds to inform that Lock on close was not started. I When FOMA terminal is folded with Lock after phone close of Lock on close set to one of "After 5 sec", "After 15 sec" or "After 1 min", the light goes and remains flash in red for approximately 3 seconds and, when the set time elapses, it goes and remains flash in blue for approximately 3 seconds to indicate activation of Lock on close.
Page 157: Accepting/Rejecting Calls From Specified Phone Numbers
Restricting calls/mail/data transfer Accepting/rejecting calls from specified phone numbers Accepting/rejecting incoming call can be set for each phone number saved in the FOMA terminal phonebook. I To use this function, specifying Accept/Reject call for each phone number and Specified caller setting are required.
Page 158: Anonymous Caller
INFORMATION If a call without caller ID is received from a party you set Reject call, the FOMA terminal's response is according to the setting in Anonymous caller regardless of this function setting. When Accept call is selected with no phonebook data set for Accept, a message appears indicating to reject all incoming calls.
Page 159: Data Security Service
This service allows you to store phonebook, messages and/or still images (hereinafter, referred to as saved data) saved in FOMA terminal to DoCoMo Data Center. In case data saved in FOMA terminal is lost by misplacement, wetting or other reasons, you can restore saved data from Data Center through i-mode operations.
Page 160: Other "Safety Settings
To stop mail function temporarily Suspend Mail To disable the IC card function IC card lock P287 To disable all IC card functions when FOMA terminal is OFF IC lock(power/off) P288 To register ID and/or password information and retrieve them when Password manager...
Page 161 Camera Before using camera..................... 160 Shooting still images with Camera............Still camera Recording movies with Camera ............Movie camera Setting image size and saving method of still images/movies Image settings/Recording settings Setting shooting method before shooting..............174 Changing setting for shooting..................176 Sending still image shot during call ..........
Page 162: Before Using Camera
When Auto save is set to "No", the still images I If FOMA terminal is left in a warm place or can also be saved as mirror images. exposed to direct sunlight for a long time, still I When you use the camera with i-αppli, the taken...
Page 163 Shooting procedure You can use Camera by holding FOMA terminal as shown below. cdefg Shooting with g * Movie recording screen a Shooting setting guidance: Press h to indicate that shooting settings are enabled. Portrait recording Landscape recording b Full/standard screen operation guidance: *: Shooting with side key [ ] is also available.
Page 164 JPEG (Exif format, approximate maximum number of still images image file compatible with PRINT that can be shot and saved in the FOMA terminal Image Matching III) or the microSD memory card at the time. Movie file MP4 (MobileMP4), ASF...
Page 165 Number of still images that can be saved in Number of Image size Quality F903i (approximate) still images 176 x 144 Economy 5553 Number of Image size Quality Standard 4699 still images Fine 3215 96 x 72 Economy 320 x 240 Economy 3593 Standard...
Page 166 Size restrictions : Msg attach : Large Size restrictions : Msg attach : Large Quality Quality Image Recording Image Recording size type size type 128 x 96 Video + Voice 128 x 96 Video + Voice Video only 1352 Video only 176 x 144 Video + Voice 176 x 144 Video + Voice Video only...
Page 167 Select "Yes". FOMA terminal and the mail creation screen The shot still image is saved to the FOMA to appear. Depending on the image or file terminal and phonebook data entry size, a confirmation screen appears asking screen is displayed.
Page 168 Switching the saving destination between - Edit Edit title FOMA terminal and microSD memory card : - Switch view Display normal/Display mirrored - Save preference Mirrored image Displaying the list of images stored in...
Page 169 : Continuous (Auto) - When shooting a moving object : Continuous - When shooting in a dark place - When shooting while moving the FOMA terminal (Manual) - When there is light in the shooting area : 4 frames (Auto)
Page 170 6 colors (red, yellow, green, blue, purple and orange) in order. Saving only the displayed still image after During continuous shoot, folding FOMA switching normal/mirror (during shooting terminal or pressing p stops the with the in-camera in Continuous (Auto) or shooting.
Page 171 I Continuous panorama shooting cannot be 2-6 still images continuously shot changing the operated in the following cases: FOMA terminal direction toward the object can be - When Still camera has been started from Phonebook, connected to form 1 still image.
Page 172 Point the camera at the object and g or INFORMATION side key [ Images may not be connected smoothly depending Shutter sound is heard and still images are on the object or how to shoot. shot. Successively, shift the camera When microSD memory card is selected as the horizontally (from left to right) and shoot 2-6 memory to save, the image is saved in "My Picture"...
Page 173 And the mail creation screen is displayed. "Yes" Even when the memory to save is set to The recorded movie is saved to the FOMA microSD memory card, the shot still terminal and the Ticker Settings screen is image is saved to the FOMA terminal.
Page 174 Information Image settings/Recording settings INFORMATION Setting image size and saving When FOMA terminal is folded during recording, the method of still images/movies recording is stopped. The saving confirmation screen appears when the FOMA terminal is opened again. Default...
Page 175 Sets the size restrictions on the file to Sets the destination to save the still image/movie shot or sound recorded. be saved. For still image shooting, the size FOMA terminal restrictions can be set separately for microSD memory card the in- and out-cameras. Camera...
Page 176 Various ways of shooting such as Zoom, Auto timer, Macro shooting and Night mode are Each time you press the available for camera of the FOMA terminal. key, the slider scale I Shooting after setting P164 "Shooting still shifts and zooming images with Camera", P170 "Recording movies...
Page 177: Night Mode
INFORMATION The countdown stops in the following cases: INFORMATION - When FOMA terminal is folded Switching screen between Full mode and Standard - When there is an incoming call or PushTalk call mode is disabled when Camera is activated from - When the date and time specified in Alarm clock or schedule Phonebook, mail creation screen or i-αppli.
Page 178 INFORMATION Image size cannot be changed by switching portrait/ Changing setting for shooting landscape recording when Camera is activated from Phonebook, mail creation screen or i-αppli. Default Shooting still image Scene mode/effect: Auto Brightness: Switching between in-camera and out- Color density: 0 White balance: Auto camera Shake reduce: Auto Frame settings: None...
Page 179 Press g [OK]. INFORMATION During shooting standby, press m1 to enable Setting shooting modes selecting a shooting mode from a list. Below the shooting mode Shooting modes can be applied to still images/ list, description of the movies being shot according to the shooting shooting mode at the conditions or your preference.
Page 180 Frame No frame I The frames saved in FOMA terminal by default Auto: are applicable to image sizes QCIF (176 x 144) Adjust white balance automatically. and Horizontal standby (320 x 240), Vertical Sunlight: standby (240 x 320).
Page 181 You can also press 8j to switch quality. For recording movie In movie recording, quality cannot be set to Availability of sending with Image size Icon "HQ++ (High quality)" unless file size message restriction is "None". Sub-QCIF Images can be attached to i-mode mail to be sent.
Page 182 Making other shooting settings Adjusting shooting settings collectively The sharpness, exposure and flicker of the still The settings for brightness, color density, white image or movie to be shot are adjusted. Adjusting balance, sharpness, exposure, night mode and Flicker can suppress the flicker phenomena in adjusting flicker can be changed.
Page 183: Bar Code Reader
"Yes" I Scratches, dirt, damages, low print quality and the strong reflection of light may disable code The shot still image is saved in FOMA terminal reading. and the mail creation screen appears. I You can activate Bar code reader from the...
Page 184 Scan the code. CODE39 code When the out-camera is placed toward the code, the code is scanned automatically. A confirmation sound is played when scanning a code is completed and the scanned data is displayed. CODE39 code is a bar code representing alphanumeric characters and symbols with vertical lines (bars) of different widths.
Page 185 Selecting "Display" displays the still Using scanned data after saving image file. b Select and set the required itemsep <Example> Adding data to the FOMA terminal eSelect a memory to save the still phonebook or UIM phonebook image to me61epeSelect the...
Page 187 Making i-mode settings Making i-mode settings ............... i-mode settings Using Message Service When MessageR/F is received............Receive MessageR/F Displaying MessageR/F stored in FOMA terminal ....MessageR / MessageF Using Certificate Operating certificate..................... 205 Using i-motion i-motion ......................... 208 Downloading i-motion from sites ................208 Setting auto play and type of i-motion to be downloaded ....
Page 188: Displaying Sites
List" of Bookmark may be lost due to failure, repair Press p during or other handling of FOMA terminal, it is downloading a page recommended that you maintain a separate record of the data you registered in your to stop downloading FOMA terminal.
Page 189 When you connect to an SSL page, a message Japanese) during a site display. appears indicating that the SSL session is started. When the serial number of your mobile phone/FOMA appears on the top of the display when the card (UIM) is requested from the site, a confirmation SSL page is displayed.
Page 190: Reading And Operating Sites
You can determine page alert/effect set other than "OFF". settings and send to a site I Note that some Flash graphics vibrate the FOMA or cancel them. The button terminal during a play even with Vibrate alert/ name differs depending on effect set "OFF".
Page 191 Page A B C is erased. You can return to Page A from Page FOMA terminal records the history of up to 20 D but you cannot then return to Page B. pages. A storage area in the terminal that When the display history for the site becomes full, the temporarily stores page logs is called "Cache"...
Page 192: Using My Menu
My Menu Scrolling screen Using My Menu You can scroll up/down the screen while contents of sites, websites, received message or MessageR/ You can register frequently accessed sites in My F are being displayed. Menu, which allows you to quickly access the site next time.
Page 193: Displaying Websites
<URL history> MENU 232 URLs of websites connected by entering URL are recorded in FOMA terminal. You can use this URL history to connect to websites. I Up to 20 URLs are stored in the URL history of each of i-mode and Full Browser. Except the last 20 logs, log is deleted chronologically.
Page 194: Recording Websites And Sites For Quick Browsing
INFORMATION Bookmark When operating during site or website display, press Recording websites and sites m and select "Bookmark" "Display". for quick browsing You can record frequently visited websites in Creating/deleting folders Bookmark and thereafter display them simply by selecting bookmarks. Create a folder and arrange bookmarks.
Page 195 1 or 2eSelect a foldereSelect a Connecting to sites or websites using bookmark to record simple key sequence <i-mode shortcut> For the bookmark of Full Browser recorded as When you record a bookmark as i-mode shortcut, i-mode shortcut, is displayed on the you can quickly display the site or website from the i-mode shortcut list.
Page 196: Saving Site Contents
Sorting bookmarks <Sort> Displaying screen memo MENU 24 de4eSelect a screen memo to The bookmark list can be sorted temporally. When the list display is closed, sorting is restored to "By display access date". Icon definitions: I You can sort all folders. Ordinary screen memo Protected screen memo de2eSelect a foldereme6...
Page 197: Downloading Various Data (Files) From Sites
INFORMATION For images that cannot be attached to mail When a mixture of bookmarks with titles containing or output from FOMA terminal ("File one-/two-byte characters, alphabetic characters and/ restricted" is displayed in File restriction), or kanji and those displayed with URLs are sorted "By items other than Display name cannot be title", the result may not be in the order of Japanese...
Page 198 - Size of 20 x 20 and 90 Kbytes or smaller INFORMATION - Mail attachment or output from FOMA terminal Some melodies may not be played correctly. are enabled When the memory is not enough or the maximum...
Page 199 FOMA terminal. The stored dictionaries To download the remaining part of the PDF can be used for entering text to FOMA terminal. data partially downloaded, press m8. I The maximum size of a dictionary file that can be saved is 32 Kbytes.
Page 200 You can download Kisekae Tool from sites and i-mode sites, character entry screens, etc. save to the FOMA terminal. Saved Kisekae Tool can I The maximum size of a font file that can be saved be set as a stand-by display image, menu icon, is 100 Kbytes.
Page 201 I Copied characters are recorded in FOMA Useful functions of i-mode terminal until FOMA terminal is turned OFF and Useful functions of i-mode they can be pasted into other locations any number of times. Note, however, that only one When displayed screen contains phone number, URL can be recorded.
Page 202: Making I-Mode Settings
Place the cursor on the phone number Display a site containing a location to add and me81e1 or information link itemeSelect location information You can add only the phone number or mail Select "Read map"eSelect "OK" address which the cursor can be placed on. Starting GPS compatible i-αppli : Select Adding data to existing phonebook entry :...
Page 203 Host address 2 is the host for i-Channel. of the animation is displayed. Use phone information: Select the edited host. Set whether to use data saved in the FOMA Press p [Save]. terminal for displaying Flash graphics. Sound effect setting:...
Page 204: When Messager/F Is Received
- When storage area is filled with MessageR/F unread or exists. protected (Green) : Unread When FOMA terminal receives a MessageR/F, the MessageF MessageR/F in the i-mode Center is deleted. exists. When the memory is not enough or the maximum...
Page 205: Displaying Messager/F Stored In Foma Terminal
Displaying MessageR/F stored : Melody (Can be attached to message in FOMA terminal and output from FOMA terminal) You can display MessageR/F stored in FOMA : Melody (Cannot be attached to message terminal. nor output from FOMA terminal) : Melody (Data error)
Page 206 Displaying/saving attached files Protecting MessageR/F <Protect message> Images, ToruCa or melodies, if any, attached to MessageR/F can be displayed, played or saved. By protecting MessageR/F, it can be prevented from being erroneously erased or being Display the list of MessageR/F. overwritten because of the lack of the memory Icon definitions P203 "Message list screen"...
Page 207: Operating Certificate
Display the list of MessageR/Feme supported sites. 3e1-4 I If blue UIM is inserted in FOMA terminal, The MessageR/F of the selected type is certificates other than CA Certificate do not displayed. appear.
Page 208 I You cannot use this function in overseas. If FirstPass PC software is installed in a PC from the Requesting to issue certificate and CD-ROM attached, you can connect a FOMA terminal to the PC and perform communication using the downloading it FirstPass.
Page 209 The downloaded certificate is available Internet communication in the condition the to sites applicable to it. FOMA terminal is connected to a PC. To use Original certificates are also available for Full FirstPass with PC, FirstPass PC software in the Browser.
Page 210 Pause/Play (Only Normal type) completed, and cannot j/Side keys [ be saved in FOMA Adjust volume terminal. p CANCEL (Streaming type) *: Some i-motion may not allow saving. (Selecting "Yes" on a confirmation screen interrupts playing.)
Page 211 Playing i-motion after downloading data : When link is set within ticker of downloaded i-motion : i-motion is played If a link such as a phone number (Phone To, automatically when AV Phone To), a mail address (Mail To), or a the download is site (Web To) is set in a ticker, a completed.
Page 212: Setting Auto Play And Type Of I-Motion To Be Downloaded
When streaming type i-motion is played while the Using i-Channel data is being downloaded, folding the FOMA i-Channel terminal, incoming call or arriving time specified for the alarm clock or schedule interrupts the download This is a service for distributing news or weather and stops playing.
Page 213 I Operating procedure P211 received while the FOMA terminal was turned OFF or was out of service area. The latest information is received and a ticker also appears on the stand-by display.
Page 214: Resetting I-Channel
Select information to display. Reset i-Channel MENU 273 The site is connected and the detail Resetting i-Channel information is displayed. You can reset i-Channel to default states. INFORMATION I Settings of Set i-Channel ticker remain When information is received, none of the ring alert, unchanged.
Page 215 Useful functions of Mail Using message logs..................Mail logs Useful functions of Mail ....................245 Setting Mail Setting mail function of FOMA terminal ..........Mail settings Using Chat mail Creating and sending chat mail........Creating and sending chat mail Using SMS (Short Message) Creating and sending SMS (Short Message) .....
Page 216 FOMA terminal can receive i-mode mail and Setting Mail Short Mail sent from an i-mode terminal using the mova service. The following settings are available: Note: FOMA terminal receives Short Mail sent from Setting procedure mova service i-mode terminal as SMS. aiMenu dOptions...
Page 217 d Reject Unsolicited Ad Mail [Receiving Mail Confirming mail address [Mail Address (Confirm Mail Address)] (Other Settings)eReject Unsolicited Ad Mail] You can check the currently set mail address. Unsolicited messages sent for the purpose Registering a secret code [Mail Address (Other of advertising and publicity without Settings)eRegister a Secret Code] recipientsí...
Page 218 Other convenient functions Sender side (903i) SMS report request You can receive SMS report request that informs whether the other party received the sent SMS. P258 Text Deco-mail image Saving in UIM Attachment You can save sent or received SMS in the UIM. P258 Mail auto receive Creating i-mode mail/Deco-mail...
Page 219 Entering by searching phonebook : Select When you are outside the service area, a "View phonebook"eSearch the confirmation screen appears asking phonebookeSelect a phonebook entry to whether to set Auto-send, provided that the send the message number of Auto-send messages is less than 5.
Page 220: Deco-Mail
I The receiver can be one of the 3 types: Deco-mail (TO), (CC) and (BCC). Creating and sending Deco-mail Main receiver Other receiver(s) of message besides the You can send i-mode mail (Deco-mail) applied with main receiver decoration such as changing the text font size or Receiver(s) of message you do not want background color or inserting a still image shot, to be known by other receiver(s)
Page 221 INFORMATION Entering characters after specifying A decoration can also be selected by pressing m on decoration a message text entry screen and selecting "Decorate On the mail creation screen, select the mail". text entry fieldea Operating procedures on the decoration Select decorationeEnter characters selection screen of Deco-mail Operation of decoration...
Page 222 eEnter Blinking characters : Select Specifying decoration after entering characters characters For the characters that have been entered in the mail text or already decorated, operate the decoration specifying the range. Making characters into ticker to run from right I "Insert line", "Insert image", and "Background eEnter characters to left : Select...
Page 223 (TAFUWA HUWAI) When messages are exchanged with other than (SAKURA) Japanese folk song FOMA terminal supporting Deco-mail, such as PC, (MOMIJI) TEIICHI OKANO the decoration may not be correctly displayed. (Snow) School song...
Page 224: Attachment (Sending)
*4: Received melody may not be correctly played if the function of UIM operation restriction is changed receiver is PC or terminal other than FOMA F903i or cannot be attached. F882iES. I Attachable file types are as shown below: *5: You cannot receive ToruCa (Details) with ToruCa compatible models other than 903i series.
Page 225 Press p [Send]. On the mail creation screen, select the attachment fieldeSelect a file to attach INFORMATION You can select an attachment file type from When you send mail attached with JPEG image "Image", "i-motion", "Melody", "ToruCa", larger than 10,000 bytes to an i-mode terminal that is "PDF", "Schedule", "Bookmark", not compatible with 2 Mbytes i-mode mail, it is "Phonebook", "Record voice"...
Page 226 On the mail creation screen, me6 INFORMATION 2eSelect "Yes" If you read a template under the mail creation screen on which you have edited the mail text, a Saving sent/received i-mode mail as confirmation screen is displayed asking whether to template : On the mail detail view screen, overwrite the mail you are currently working on.
Page 227 INFORMATION Automatically sending message from a When a downloaded template has an unavailable place where radio waves reach attachment file, a confirmation screen appears asking <Auto-send> whether to delete the attachment file before saving the template. Select "Yes" to save the template with You can make settings so that i-mode mail created the unavailable attachment file deleted.
Page 228 "Unsent messages" folder operation to the parties with phonebook number - When Auto-send message saved in "Unsent messages" folder 0-99 in FOMA terminal phonebook. is moved to a folder for Message i-αppli I The destination is the first mail address for...
Page 229 Setting "ON" for Receive option allows selective Receiving and handling i-mode mail Mail auto receive reception of desired messages only without When i-mode mail is received automatically receiving all messages. The i-mode mail or MessageR/F stored in the i-mode I Maximum number of saved items P481 Center is received altogether when new i-mode mail delivered.
Page 230 You may not automatically receive i-mode mail soon INFORMATION after you sent. Perform i-mode inquiry. In All lock, Omakase Lock, PIM lock or Lock on close, When the i-mode mail stored in the i-mode Center is no messages appear. received, the i-mode mail is deleted from the i-mode Even when Receive option is "ON", all messages are Center.
Page 231 The selected quick reply template is i-mode inquiry also available by pressing and holding inserted before the quoted text. one of side keys [ ] for 1 second or more with FOMA terminal folded. Edit the messageep [Send] When the received message list is displayed...
Page 232 (the link item that can activate i-αppli and the melody melody and ToruCa), files that cannot be attached to that is displayed in the message) are not set to reply mail or output from FOMA terminal are not attached message and are not quoted as characters. to forwarded message.
Page 233 Switching between display/not display for INFORMATION image : Select the file name. When free space in FOMA terminal storage area is You can also switch display/not display of insufficient for Receive option attachment file to be image from an image attached to the downloaded, downloading fails.
Page 234 I Sent melody may not be correctly played if the Saved i-motion can be played or used as a calling sender is PC or terminal other than FOMA F903i image. I Maximum number of saved items or F882iES.
Page 235 1 or 2 ToruCa is saved in "ToruCa" folder of ToruCa To return to the title display, select the list in FOMA terminal or "ToruCa" folder in first row of the melody displayed as data and press m65. microSD memory card.
Page 236 Press p [ Save]. screen is displayed asking whether to delete. When The saved phonebook data is placed in FOMA saving the schedule data, delete unnecessary terminal phonebook. schedule data from FOMA terminal according to...
Page 237 Displaying/saving bookmark data Displaying/saving Word, Excel or PowerPoint file Saving the bookmark data attached to i-mode mail. I Maximum number of saved items P481 Saving the Microsoft Word, Microsoft Excel or Microsoft PowerPoint file attached to i-mode mail. ae1eSelect a foldereSelect I Maximum number of saved items P481 i-mode mail with bookmark data...
Page 238 Displaying sent message : Files unidentifiable with this FOMA terminal is only enabled for saving to microSD memory card or Displaying unsent message : transfer. When saving to microSD memory card, a file Select a folder.
Page 241 (except SMS can be stored in Data Center on the network. GMT+09:00), appears succeeding the In case data saved in FOMA terminal is lost by receiving date/time. misplacement, wetting or other reasons, you can restore saved data from Data Center Reading sent message detail view screen through i-mode operations.
Page 242 Creating/deleting folders Checking number of mail items <Check No. of msgs> Creating folders The number of unread, read and protected I In Inbox, up to 40 folders in addition to "Inbox" messages saved in Inbox, Outbox and Unsent folder and folder for Message i-αppli can be messages can be checked for each folder.
Page 243 Move the cursor to the phonebook entry or Moving received/sent message to date to display the first 4 messages of those another folder <Move message> matched when Display 1 row has been set in Message list and the first 2 messages when You can move or copy saved messages to another Display 2 rows has been set.
Page 244 <Example> Protecting a received message INFORMATION ae1eSelect a folder For sorting "By sender" or "By address", even when the mail address is saved in the phonebook, message Displaying Outbox/Unsent message list will not be sorted by the name saved in the P236 phonebook but in the mail address order.
Page 245 Deleting received message Deleting sent/unsent message You can delete messages in the following method: You can delete messages in the following method: : Available : Unavailable : Available : Unavailable Screen for starting operation Screen for starting operation Deletion Deletion method method Folder list...
Page 246 For SMS log, a message creation screen Displaying message logs with a phone number set as destination appears if no mail addresses are saved in <Example> Displaying Sent msg log the phonebook and a message creation me481 screen with a mail address set as destination appears if it is set in the Place the cursor on a party to display and press g to display details screen.
Page 247 I When the mail addresses are saved in I Copied characters are recorded until FOMA phonebook entry with the secret attribute set, terminal is turned OFF and they can be pasted you can make calls only in Secret mode.
Page 248: Sort Criteria
Adding URL may not be made from Deco-mail. <Example> Adding phone number displayed on the received message Setting Mail Mail settings ae1eSelect the foldereSelect Setting mail function of FOMA the message to add terminal Displaying the Outbox message detail view screen P236...
Page 249 4e1 or 2 @docomo.ne.jp" is set in sorting criteria. b Select a group to specify. When the same mail address is saved in the FOMA terminal and UIM phonebooks, the mail address in Specifying Not in phonebook : the FOMA terminal phonebook is sorted with priority Sorts mail from mail address or phone and it may not match with the sorting priority.
Page 250 Changing or checking sorting criteria Recording signature <Example> Checking sorting criteria Default ae93e1 or 2 ae942eg Select sort criteria to be checked. Enter a signature. Up to 5,000 two-byte or 10,000 one-byte Changing registered sort criteria : characters can be entered. a Place the cursor on the sort criteria to Similarly to i-mode messages, a signature change and me2...
Page 251 Enter the mail group nameep Setting items of i-mode inquiry Up to 8 two-byte or 16 one-byte characters <Message retrieval> MENU 164/2632 can be entered. Press p to add other mail group Default Select All continuously. When Message retrieval is performed, items to be received can be specified by selecting from i-mode Select a mail group for registering a mail mail and MessageR/F.
Page 252 Select a templateeEnter a textepe Setting whether to quote message Select "Yes" when reply <Reply format> MENU 1951 Up to 20 two-byte or 40 one-byte characters Default Quote: Yes Quote characters: > can be entered. Checking registered template : Place the You can set whether to quote the body of the cursor on the template to check and p.
Page 253 INFORMATION Changing mail font size <Font size> Images inserted and/or melodies pasted to message Default Style theme default text are received regardless of this setting. You can change the font size in the display of received message, sent message and mail Setting whether to play melodies template, etc.
Page 254 When not all characters can be displayed on displayed. the details field, appears. The page can - Lock on close ON (While the FOMA terminal opened) be switched using h. - During All lock ON - Public mode ON The sender's nickname and the date or time...
Page 255 Creating and sending chat mail Adding chat member <Chat member setting> I When you send chat mail, all registered members are set as receivers. Members can be Register addresses to/from which chat mail is to be sent or received. selected on the send screen. All members are I Up to 5 chat members can be registered.
Page 256 " (Chat mail)" is received, it is saved screen. If the FOMA terminal is open while Chat in a folder of Inbox. When chat mail is received mail is activated, ring alert or vibrator does not...
Page 257: Creating And Sending Sms
Switching all member of chat mail to mail Deleting all data of the chat mail log group : I Chat mail in Inbox or Outbox folder are deleted. a me5 b Select another mail group to Protected messages are not deleted. switche Select "Yes"...
Page 258 If you set SMS report request to "Request" and send SMS, you will receive SMS report request that Select the message text fieldeEnter notifies you that the other FOMA terminal received message the SMS. SMS report request is saved in Inbox folder.
Page 259 Inbox folder. At this time, sounding, the screen displayed before the is indicated on the screen. Move to FOMA terminal ( P259) or delete SMS in the UIM.
Page 260 If the SMS Center stores SMS, it is received. Saving SMS (Short Message) in UIM INFORMATION Receiving SMS may take time. Sent/received SMS can be moved/copied from the FOMA terminal to UIM. SMS settings MENU 174 Moving/Copying SMS (Short Setting SMS (Short Message) Message) into UIM...
Page 261 Icon definitions: the SMS in the UIM, the SMS already sent are saved : Unread (able to reply) in a folder of Outbox of FOMA terminal. : Unread (unable to reply) : Read (able to reply) : Read (unable to reply)
Page 262 INFORMATION When operating from the SMS detail view screen in UIM, press m and select "Move/Copy" "Move to phone" or "Copy to phone". When the memory is not enough or the maximum number of saved items is reached, SMS cannot be moved or copied.
Page 263 i-αppli i-αppli ..........................262 Downloading i-αppli ..................... 263 Starting i-αppli ......................265 Starting i-αppli quickly....................272 Automatically starting i-αppli..................273 Starting i-αppli from site, mail or ToruCa ........... i-αppli To Operating i-αppli stand-by display........... i-αppli stand-by display Managing i-αppli ......................275 Using various functions from i-αppli ................
Page 264: I-Αppli
"i-mode" folder of i-motion respectively or in the Downloading i-αppli from sites allows more i-αppli. Any ToruCa saved by i-αppli is saved in convenient use of a FOMA terminal compatible "ToruCa" of ToruCa list. with i-mode (hereinafter called as i-mode terminal).
Page 265: Downloading I-Αppli
Shooting with Camera Message i-αppli Images can be taken with FOMA terminal camera from i-αppli. P277 Message i-αppli is a type of i-αppliDX that allows This function is available with i-αppli more convenient and enjoyable use of i-αppli by supporting shooting with Camera.
Page 266 The downloaded i-αppli starts. I If Message i-αppli that uses the same message Select "No" to return to the site screen. folder has already been saved in the FOMA When Set stand-by disp. is set to "Yes", a terminal, it cannot be downloaded.
Page 267: Starting I-Αppli
If a received message that supports Message i-αppli Icon definitions: to be downloaded has already been saved in the (orange) : i-αppli FOMA terminal, a confirmation screen is displayed : i-αppliDX asking whether to move the received message to the : Message i-αppli folder that was created automatically at time of the (Without background color) : i-αppli...
Page 268 When i-αppli with vertical size of more than 240 dots FOMA terminal makes communications and is activated, it appears on the full-screen. When blinks. In this case, no communication fee will be i-αppli with horizontal size of more than 240 dots is...
Page 269 Display light time in Display light of Display. automatically. This setting applies for ToruCa saved in Setting vibrator (Vibrate effect) the FOMA terminal. Location usage setting Default Set whether to enable GPS compatible Set whether to allow the vibrator operation by i-αppli to use location information...
Page 270 (Keitai Brain Starting another i-αppli from i-αppli Stretching (editing supervised by Professor Some i-αppli can start specified i-αppli and allow Ryuta Kawashima at Tohoku University)) continuous use of i-αppli without returning to the You solve various problems to estimate your brain software list.
Page 271 I See "MANUAL" on the GAMEMENU screen for operation commands, function menus, i-αppli stand-by display, etc. Simulation While FOMA terminal is folded with i-αppli stand- by display being set, i-αppli stops its time and stays in sleep state. When FOMA terminal is opened, simulation a : Indicates points.
Page 272 f : Indicates the quota count of each kind of (ZENRIN Map + animals to be captured. Navigation F) g : Indicates the number of each kind of animals captured. This i-αppli uses GPS k: Moves the cursor horizontally or vertically. function.
Page 273 I A packet communication fee is required separately. I When activating iD i-αppli for the first time, you I When using overseas, set Date & time of FOMA have to agree with " (Precautions terminal to Japan time.
Page 274: Starting I-Αppli Quickly
Using DCMX mini, a credit payment service becomes available right now by making application Starting i-αppli quickly from this application. i-αppli can be started by a simple operation from Membership application and examination the stand-by display. Setting i-αppli to one-key/two-key Setting card information shortcut I You can register 1 one-key shortcut.
Page 275: Automatically Starting I-Αppli
Start Specifying whether to start failure history. automatically <Auto start> - When FOMA terminal power is OFF - UIM operation restricted (except for preinstalled i-αppli) Default - When UIM cannot be detected Set all i-αppli, which are set to "ON"...
Page 276: Starting I-Αppli From Site, Mail Or Toruca
INFORMATION i-αppli To When FOMA terminal is turned ON while setting the Starting i-αppli from site, mail i-αppli stand-by display, a confirmation screen is or ToruCa displayed asking whether to display the i-αppli stand- by display. The i-αppli starts when link item to start i-αppli - "Yes"...
Page 277: Managing I-Αppli
INFORMATION Creating folders To cancel from the software list, place the cursor on I Up to 20 folders can be created. the i-αppli set on the i-αppli stand-by display, press m and select "i-αppli display" "Cancel". d (1 sec. or more) Displaying exit history of i-αppli stand- by display <Abnormal exit hist.>...
Page 278 INFORMATION Deleting i-αppli When only the i-αppli has been deleted and the I Depending on the i-αppli, data in the IC card will message folder used for Message i-αppli is left be deleted. undeleted, the message can be viewed from the I Also, some types of i-αppli requires to activate it submenu of the message folder list.
Page 279: Using Various Functions From I-Αppli
INFORMATION Checking current settings of i-αppli To delete all i-αppli items in folder from the i-αppli <Displaying Software information> folder list, place the cursor on a folder, press m and The settings such as storage size of i-αppli, i-αppli select "Delete" "Delete software".
Page 280 INFORMATION Using ToruCa from i-αppli When you activate Camera from i-αppli, the shot image/movie is saved in "i-mode" or "Deco-mail Saving ToruCa from i-αppli picture" folder of My Picture, "i-mode" folder of i-motion respectively or in the i-αppli. Shot image/ Select "Yes (NewEntry)"...
Page 281 Osaifu-Keitai/ToruCa Osaifu-Keitai ........................280 Starting Osaifu-Keitai compatible i-αppli ..............281 ToruCa......................... ToruCa Downloading ToruCa................. ToruCa download Displaying ToruCa..................ToruCa list Managing ToruCa ......................284 Using information of ToruCa ..................285 Setting ToruCa functions ..................... 285 Preventing use of IC card function ............IC card lock...
Page 282: Osaifu-Keitai
FOMA terminal can be more conveniently used as transfers data in an IC card collectively to a new tools in our lives; for example, FOMA terminal can Osaifu-Keitai. After data in IC card is transferred, be used as electronic money, an airline ticket or...
Page 283: Starting Osaifu-Keitai Compatible I-Αppli
If the IC card cannot be recognized by scanning the When Osaifu-Keitai compatible i-αppli is activated, FeliCa mark of FOMA terminal with the IC card reader Osaifu-Keitai may not be able to be used by placing (reader/writer), shift the mark back and forth or right the FeliCa mark over the IC card reader (reader/writer).
Page 284: Downloading Toruca
Flow of using ToruCa ToruCa download Downloading ToruCa ToruCa is downloaded by reading Osaifu-Keitai with the I Maximum number of saved items P481 IC card reader (reader/writer). The card is saved in ToruCa ToruCa download method of LifeKit. Site IC card reader microSD (reader/writer) memory...
Page 285: Displaying Toruca
f " Detail information downloaded from saved ToruCa is (Details)" button not saved as another file, but is added to the original Displayed when there is any detail ToruCa. information for the ToruCa. Select "Details" When free space in the storage area is not sufficient and "Yes"...
Page 286: Managing Toruca
1eSelect the Category fielde Deleting folders 1-5ep [Search] me63ePlace the cursor on Press k to switch category. me3e the folder to delete and AuthenticateeSelect "Yes" Category INFORMATION "ToruCa" and "Used ToruCa" folders cannot be Category icon included renamed, sorted, deleted. in the category indicated by the cursor Searching is made for...
Page 287: Using Information Of Toruca
Perform necessary operation. INFORMATION When moving or copying ToruCa on the screen, Adding phone number and mail address press m and select "Move/Copy" "Move to folder" into phonebook : or "Copy to folder". a Place the cursor on the phone number or ToruCa cannot be moved/copied to "Used ToruCa"...
Page 288 Auto-display: INFORMATION Set whether to automatically display When FOMA terminal is placed over an IC card reader downloaded ToruCa for approximately 15 (reader/writer) with this function set to "OFF", a seconds. confirmation screen asking whether to use ToruCa When "ON", downloaded ToruCa is...
Page 289: Preventing Use Of Ic Card Function
With FOMA terminal folded, you can start/cancel IC card lock and check IC card lock settings. Select sort criteria to be checked. I To cancel IC card lock with FOMA terminal A sort criteria detail screen appears. folded, use fingerprint authentication.
Page 290 Select and set the required items below Locking only a specified IC card ep [Set] function <Lock preference> MENU 84145 Time: Default IC card lock Set the start time and end time to deactivate IC card lock. You can set so that, when IC card lock is activated, You can set the time of the next day as the only the IC card function for Osaifu-Keitai end time.
Page 291 GPS function GPS..........................290 Positioning your current location............Position location Using GPS compatible i-αppli ..................292 Providing your current location information when requested..Location request Notifying your current location information........Notify location Displaying positioning histories..............Loc. history Setting GPS ........................297 Using GPS........................
Page 292: Gps Function
- Providing location information on request from the Approximate time other party (Location request) elapsed in positioning If FOMA terminal is specified as a searching object in Accuracy a service applicable to Location request function Positioning is made. The light goes lit and the...
Page 293 2 Paste, send or add location information from location history. 3 Select phonebook entry from the FOMA terminal phonebook list with location information saved and paste, send or add 1 Select "OK" to connect to a map site and location information.
Page 294: Using Gps Compatible I-Αppli
I A packet communication fee is required separately. Using GPS compatible i-αppli Restrictions I Using GPS compatible i-αppli sends location Menu Description imposed after 90 days information to the Information Provider of the i-αppli to be used. (GPS) Check your Map reduction is I When using the GPS function with GPS (Current...
Page 295 (Departure location): Screen and key operations Specify in the same way as a destination. When " (GPS) (Current location me692eSelect (GPS))" is selected, you can check the F (ZENRIN Map + current location before specifying the Navigation F) departure location. Activation is enabled from a link item in (Specify time): location information of site or ToruCa.
Page 296: Providing Your Current Location Information When Requested
I Location request is disabled during positioning None 10/24 or later with Position location or Notify location, while 10:00-18:00 FOMA terminal is out of service area or during Start set 10/24 or later Self mode, i-mode communication with i-αppli or Start: 2006/10/01 10:00-18:00 infrared communication/iC transmission.
Page 297 When time after the current time is set as Start When Location request is issued and one on the next day is set as End <Example> When " (Check each time)" is <Example> Start: "10:00", End: "02:00" set for usage settings by services Repeat Date "Always permit"...
Page 298: Notifying Your Current Location Information
I Notify location is disabled during positioning with provider you subscribed to. Up to 12 one-byte characters can be Position location or Location request, when FOMA entered. Numerals, "#" and " " are terminal is out of service area or during Self mode available.
Page 299: Setting Gps
me693 A list for Loc. history displayed from other functions such as i-αppli does not contain histories, if any, of Icon definitions: failing positioning with Location request or Notify : Position location location. In addition, you cannot use or delete (in gray) : Location request/ location information from a submenu.
Page 300: Using Gps
Light alert: communications due to failures or malfunctions Set a lighting or flashing pattern and color of of FOMA terminal or external events such as the light. power interruption (including battery "Sync melody" cannot be selected. In exhaustion) in using FOMA terminal for addition, "OFF"...
Page 301: Full Browser
Full Browser Viewing websites for PCs ................. Full Browser Setting for Full Browser ....................304...
Page 302 "Yes" website is displayed and the number of the INFORMATION times it is visited in FOMA terminal. Based on such information, various functions on the The following functions are not supported: website can be easily used.
Page 303 Key operations on Full Browser screen Viewing screen of Full Browser The following operations are available on the Full Browser screen: j, t, a, 1-3, 7-9: Scrolling P190 Depending on the display mode, keys available for scrolling differ. P305 h: Displaying next or previous pages (only Mobile mode) P189 g/c : Setting/canceling frame enlarged display...
Page 304 Displaying a framed website Displaying multiple websites <Multi window> When a framed website is displayed, a thumbnail screen appears allowing to view the entire You can view a website selected from a maximum configuration. Individual frames can be enlarged of 5 websites displayed. for viewing.
Page 305 Procedures for uploading vary depending on displayed on website websites. On the Full Browser screen, You cannot upload images inhibited to output from FOMA terminal or data other than images or Enter characters in the search fielde character strings. g [OK]...
Page 306 Microsoft Word, Microsoft Excel or setting. Microsoft PowerPoint files are saved in a de942 folder of Other in FOMA terminal or "Other" folder in microSD memory card. If Other in Select the Cookie fielde1-3 FOMA terminal has multiple folders, a screen appears asking to select a saving When "Valid (notify)"...
Page 307 Mobile mode animation <Image display> MENU 2945 You can set whether to display a screen aligned with the lateral display size of FOMA terminal Default Image, Animation: Display (Mobile mode) or the PC screen size (PC mode). de945eSelect and set...
Page 308 Setting whether to send Referer <Referer setting> MENU 2947 Default Send I Please note that DoCoMo is not liable if your information is known to third parties by sending Referer. de947e1-3 Setting whether to display full screen <Screen view setting> MENU 2948 Default With menu icon view...
Page 309 Making full use of microSD memory card microSD memory card ....................327 Inserting/removing microSD memory card ............... 332 Transferring data between FOMA terminal and microSD memory card ....332 Displaying data in microSD memory card..............336 Managing microSD memory card ................339 Operating microSD memory card in FOMA terminal from PC .........
Page 310: Displaying Image
: i-mode : Camera I Images in JPEG or GIF format and Flash graphics : Frame, stamp : Data transfer can be displayed on FOMA terminals. : Chara-den b Type of image me51eSelect a folder Blank : Still image The following images are saved in each folder...
Page 311 Images with size larger than 176 x 144 or for the horizontal display is displayed in a full-screen images that cannot be output from FOMA view, it is automatically scrolled in a horizontal or terminal can be set only for outgoing/ vertical direction depending on the horizontal to incoming image.
Page 312: Editing Still Images
- Still images with mail attachment or output to terminals The selected created animation returns to other than FOMA terminals inhibited (except still individual still image. images with File restriction set to "File restricted" on Select images to save to Create the local terminal) animation.
Page 313 Zooming in/out still image size : INFORMATION a 0eh to zoom in/out size When the image size is larger than 240 x 320, the You can zoom in/out by 5%, holding the image is displayed with reduced magnification aspect ratio. The zoomed out or in image during editing.
Page 314 Each time you press t, the clipped size Changing tone to monotone or sepia : 2 or 3 switches. To specify the clipped range, press m. The tone is changed and the still image edit screen reappears. Specifying the range and clipping out still images : Press g [OK].
Page 315 On the edit menu screen, 6. k to adjust the position to attach the stamp and g. A frame with the same size as the still image to be edited is displayed. A beep sound is heard and stamp is pasted. You can paste stamp Frame name in other locations...
Page 316 My Picture of Data Box can be stored in Data On the edit menu screen, 0e1 or Center on the network. In case data saved in FOMA terminal is lost by misplacement, wetting or other The image is saved as a new still image in the...
Page 317: Setting Operating Conditions Of Image
Playing movie/i-motion Setting operating conditions of image I Files in MP4 or ASF format can be played on FOMA terminals. Default Show thumbnails: Yes I Movies/i-motion with image size of 48 x 48 - Display title: Yes Display number: Yes 320 x 240 can be played.
Page 318 Press g [Select]. Place the cursor on the movie/i-motion to play. The movie/i-motion play screen shows icons indicating the play status, movie/i-motion The display name of the file and an icon type, etc. indicating details are displayed. List display Thumbnail display Icon definitions: For the movie/i-motion with a bookmark set, a Originated...
Page 319 Restriction on the number of times (including movie/i-motion which has been copied or Status Description moved from the FOMA terminal to a microSD memory Replay count "Available to replay x(x/y) time(s). card and then copied/moved back to the FOMA remain Play?"...
Page 320: Editing Movie/I-Motion
I The following movies/i-motion can be edited: message. Selecting "Yes" allows pasting - Movies shot with your FOMA terminal the image to the message text. - Movies/i-motion with no file restrictions other than...
Page 321 Setting the limit of cutting size : Setting the size for message attachment to cut out : The cut size can be set when file size of the original movie/i-motion to be cut out is The cut size can be set when file size of the larger than 500 Kbytes.
Page 322 Select and set the required items Font color: Specifies color of characters. belowep If it is set to "Default", white is set. Time interval to show: This function gives no influences to the Sets how to arrange tickers. pictograms. Set "User specified" to specify any Background color: position to set a ticker.
Page 323: Settings Operating Conditions Of Movie/I-Motion
You can specify the light or sound volume for a movie/i-motion play. You can move copyrighted i-motion that is acquired from a site and saved in FOMA terminal to me53eme5eSelect microSD memory card. It cannot be copied. and set the required items...
Page 324: Chara-Den
UIM used when downloading the i-motion detail are displayed. from a site or when moving it to microSD memory from FOMA terminal is inserted (in addition, the model must be the same for some i-motion). Making full use of Chara-den...
Page 325: Shooting Chara-Den
: Still image : Video den. b Memory to save Action details can be checked by pressing : FOMA terminal : microSD memory card Switching between Action and Action of c Action type a (1 sec. or more) parts :...
Page 326 Still image: If the size of video file reaches the limit while Shoots still images from Chara-den. recording, recording is automatically e Image size stopped and video recorded up to that point : (Still image, video fixed) is saved. f Image quality When "No"...
Page 327: Settings Operating Conditions Of Chara-Den
Melodies downloaded from a site or i-mode shot/recorded data into the specified mail destination. Preinstalled: Setting "No" displays a confirmation Melodies stored in FOMA terminal by screen at the end of shooting, which default P114 allows operations such as switching Mail attach melody: memories to save or composing message.
Page 328: Setting Operating Conditions Of Melody
Data transfer: Icon definitions: a Play bar : Indicates the current playing Melodies read with Bar code reader, melodies moved/copied from microSD position. b Volume : Indicates current volume. memory card or melodies received via data communication The following operations are available while My album: playing a melody: h/Side keys [...
Page 329: Microsd Memory Card
Even when "Sync melody" is set for Light pattern or operations. Vibrate, it may not be synchronized with some I To connect FOMA terminal to PC, USB cable is melodies. necessary. Even when "Play portion" is set for Play position, it may not be performed for some melodies.
Page 330 I It is advisable that the data saved in microSD When displayed on FOMA terminal memory card be separately backed up for The microSD memory card folder structure is as storage.
Page 331 *1: DCF stands for Design rule for Camera File system, STILxxxx.JPG/STILxxxx.GIF which is the standard for file systems. SUDxxx *2: Number of data items that can be saved from FOMA STILxxxx.JPG STILxxxx.GIF terminal to microSD memory card, regardless of the RINGER [Melody] microSD memory card capacity.
Page 332 SVCxxxxx [Data of i-αppli] memory card information using FOMA terminal. xxxxxxxx If you change or delete a folder name in a microSD xxxxxxxx.xxx memory card with a PC, etc., the FOMA terminal SVCxxxxx [Data of Chaku-uta full ® cannot correctly display data. FFFMUDEF xxxxxxxx.SB2...
Page 333 Data available in microSD memory card Other data (File size) The data size limits and data availabilities for Operation Copy/move Copy/move each file type are as follows: to microSD to FOMA Format Details of mail attachment P222 "Attaching (Extension) memory card terminal files"...
Page 334: Inserting/Removing Microsd Memory Card
I Do not insert a microSD memory card damaged FOMA terminal and microSD or soiled on the surface or deformed to FOMA memory card terminal. Doing so may cause malfunction. Data can be copied or moved between FOMA...
Page 335 Note that it does not apply to LCS client data with File restriction set to "File restricted" on the FOMA terminal, data in "Data transfer" folder *: Cannot be copied for the operation of One item (copy) or data compatible with contents transfer.
Page 336 When data in My Picture, i-motion or Melody of Press g to stop copying or moving. FOMA terminal is copied or moved to the microSD memory card, the file name is automatically changed Copying PIM or LCS client data into to that for management.
Page 337 For LCS data, data of same phone number is terminal to microSD memory card not restored. If the number of items to All PIM or LCS client data in FOMA terminal can be restore exceeds 5 while data being restored, backed up to microSD memory card at once.
Page 338: Displaying Data In Microsd Memory Card
Searching the data in microSD memory me5eEnter the date and card : Press g to stop restoration. Backup data up timeep to the stopped point is restored in the FOMA Press g to stop searching. terminal. Playing the movie continuously (only movie data) :...
Page 339 When no page number is entered, the first from a site or when moving it to microSD memory page is displayed. from FOMA terminal is inserted (in addition, the Searching the data in microSD memory model must be the same for some i-motion).
Page 340 Place the cursor me31e phonebook backup data cannot be displayed. It is on the data to delete and displayed when the backup data is restored to FOMA Select "Yes" terminal. Deleting selected ToruCa : When the FOMA terminal phonebook entry including...
Page 341: Managing Microsd Memory Card
Deleting selected LCS clients : To delete all data saved in a microSD memory card a me22eSelect data to delete or use a new microSD memory card on FOMA b peSelect "Yes" terminal, initialize it. Deleting all LCS clients : me23e me65epeSelect the AuthenticateeSelect "Yes"...
Page 342: Operating Microsd Memory Card In Foma Terminal From Pc
<USB mode settings> folder ( P329) under a different name using a PC, etc. Default Communication mode When operating data in microSD memory card from a PC, FOMA terminal must be set in one of the following modes beforehand: Data Operation...
Page 343 "Manual for Data Communication" in the using USB cable with "microSD mode" or "MTP CD-ROM attached. mode" set, PC may not be able to recognize FOMA terminal in the following cases: Connecting using USB cable - When "microSD" in "LifeKit" menu is activated - When copying/moving data from FOMA terminal to I When "microSD mode"...
Page 344: Using Album
Pull the USB cable out from the PC. INFORMATION When you operate from the folder list of movie/ INFORMATION i-motion or melody, press m and select "Create When disconnecting the USB cable from the PC in album". microSD mode, click in the task tray in the lower- When you operate from the folder list of Chara-den, right corner of the PC screen, click "USB...
Page 345: Viewing/Editing Detail Information Of Data
When you operate from the melody play screen, Stop press m and select "Move/Copy" "Restore to Even when the FOMA terminal is folded folder" "One item" or "All items". during an album play, play is not stopped. In Operation in "Deco-mail picture" folder to return to this case, side key operation is available.
Page 346 Indicates whether or not moving from (Moved I Changes may be disabled for some types or FOMA terminal to microSD memory card to phone) contents of preinstalled data, even when and vice versa are enabled "Variable"...
Page 347: Deleting Data
*3: For i-motion compatible with contents transfer, the item PDF data file size indicates a total size which is "Unavailable" for being saved in microSD memory including files for managing i-mode card may be "Available" after moving to the FOMA bookmarks and icon information. terminal. attach...
Page 348: Sorting Data
Infrared communication INFORMATION When you operate from movie/i-motion list, melody You can send and receive data to/from other FOMA list, Chara-den list, My Document list (PDF data) or terminals, mobile phones or PCs equipped with the Other list (Word, Excel, PowerPoint files), press m infrared communication function.
Page 349 I Bookmark data, if any, received from terminals INFORMATION other than FOMA F series is saved to the top When placing FeliCa marks close to each other, do folder. not give a strong shock to FOMA terminals.
Page 350: Sending Data Via Infrared Communication/Ic Transmission
ToruCa (Details) including files Secret mode ON. prohibited from outputting from User information and PushTalk FOMA terminal or files whose phonebook (including Group data) is function of UIM operation restriction also sent by Send all. is set cannot be sent.
Page 351: Receiving Data Via Infrared Communication/Ic Transmission
Received data can be saved directly in iC/microSD" "Send Ir data" or "iC transmission". the FOMA terminal or saved in FOMA terminal after When you send via infrared communication and iC being saved temporarily in INBOX and checked. transmission on the User information screen, press m and t, respectively.
Page 352 INBOX. After receiving is finished, the data Note that, overwriting will delete all existing list of INBOX appears. P351 data in FOMA terminal and write new data. Save: When you have selected "Confirm & save", Received data is saved in the FOMA enter the authentication password (4 digits) terminal.
Page 353: Using Infrared Remote Control Function
ToDo data have been received with "Overwrite" number of items that can be received and registered set, all schedule items registered in FOMA terminal may be fewer than the limit in the FOMA terminal. will be deleted. Message data received from equipment that is able to...
Page 354: Setting Operations For Data Transfer
The file name can be changed after Recorded sound can be saved in microSD memory recording sound. P344 card as well as in FOMA terminal or attached to Message Sounds can be attached to a message i-mode mail to send.
Page 355 Sound recorder is activated and enters microSD memory card, the recorded recording stand by state. sound is saved to the FOMA terminal. If the file size of the recorded sound is larger than 1.99 Mbytes, the sound cannot be attached to message.
Page 356: Changing Record Settings
g [Save] or side key [ Making full use of PDF data The recorded sound is saved in "Camera" PDF data folder of i-motion. P315 PDF data downloaded from i-mode sites or peSelect the Checking the saved sound : Internet websites can be displayed. Various sound to check operations are enabled while PDF data is After checking, press c twice to return...
Page 358 When you finish the operation, Jumping using bookmark Select "Yes" Bookmarks set in the PDF data can be used for page When the PDF data is changed, a confirmation jump. screen is displayed asking whether to save the data. Select "Yes" to save. Display PDF dataeme41e While displaying the changed PDF data,...
Page 359: Adding And Using I-Mode Bookmarks And Marks
Display PDF dataeme7eSelect Changing page layout and set the required items belowe p [Save] Select a page layout from "Single page (Display 1 page)", "Continuous (Display continuous pages)" or Display properties: "Continuous-facing (Display 2 pages)". Set whether to display the page number, total number of pages and the Display PDF dataeme65e...
Page 360: Capturing Pdf Data Screen
PDF data. cursor on the i-mode bookmark to delete Output availability of the captured image file from and me21eSelect "Yes" FOMA terminal depends on the original PDF data Deleting selected i-mode bookmarks : setting. me22eSelect i-mode bookmarks to deleteepeSelect "Yes"...
Page 361: Displaying Other (Word, Excel, Powerpoint) Files Displaying Word, Excel And Powerpoint Files
Press g [Select]. Displaying other (Word, Excel, PowerPoint) files Page/Total pages, Displaying Word, Excel and Magnification PowerPoint files You can display Microsoft Word, Microsoft Excel and/or Microsoft PowerPoint file data saved in Other of Data Box or in microSD memory card. me58eSelect a folder Folders in Other are displayed by .
Page 362 INFORMATION Zooming in/out the display Some data such as one containing a lot of images You can display by fitting to the width, fitting to the may take extra time to be displayed. page or specify the magnification. A data that is not supported format or contains complicated design, etc.
Page 363 Playing Music Music player ........................362 Saving music data ......................362 Reading Music player folders and screen..............364 Playing music data......................366 Managing folders, playlists and files ................367 Setting Music player..................Settings...
Page 364: Music Player
Windows Media Player 10 from PC. I Note that using Music player consumes a lot of Saving music data power. I FOMA terminal can play WMA file or Chaku-uta ® full protected by copyright protection ®...
Page 365 I Playlists can be transferred from PCs. Note that FOMA terminal can also be deleted using Windows up to 400 music data in the playlist can be Media Player 10 while FOMA terminal is connected to transferred. a PC. I WMA files cannot be saved in FOMA terminal.
Page 366: Reading Music Player Folders And Screen
Music player. I These folder structures are used only by Music player. They do not match with actual folder structures in FOMA terminal or microSD memory card. I These folders are categorized based on detail information of music data, etc. Same music data is displayed in different folders, depending on the detail information.
Page 368: Playing Music Data
Stopping Music player : Glimmers. When the information of previously played *: Operates only with FOMA terminal closed. ® tune disappears because the FOMA terminal When Chaku-uta full , failed in power is turned back ON, the previously...
Page 369: Managing Folders, Playlists And Files
(Slides in the opposite direction of Enables disabled keys. When replay restrictions have been set for music *1: Music player can be started only when FOMA terminal data, a confirmation screen is displayed before play is folded. starts. Replay restriction types and contents to...
Page 370 INFORMATION INFORMATION If music data set for ring alert is moved from FOMA Playlists cannot be created exceeding the limit terminal to microSD memory card, the ring alert number. Delete unnecessary playlists before creating setting returns to default. new ones.
Page 371 I Removing music data in a playlist does not Select the sorting method from "Track number", "Display name", "Artist", "Album", delete that music data itself. I Removing is enabled only in playlist in FOMA "Genre", "Year", "Saved date", "File size", "Originated" or "Title". terminal.
Page 372 Permit Setting music data for ring alert File restriction Indicates inhibition of redistribution as You can select "Full song ring tone" to set whole "Yes" or "No". music data as a ring alert or "Point ring tone" to set Replay Restriction a part of it.
Page 373 Changing detail information of music data : Displaying images or lyrics of music a On the music data list screen, place the data cursor on the music data to change detail information and me22 I Images in JPEG or GIF format can be displayed. b Select an item to changeeEnter new I You can display a maximum of 1 Jacket image, 2 data...
Page 374: Setting Music Player
Settings Setting Music player Default Show thumbnails: No Volume: Level 20 Repeat play: Play all Shuffle: OFF Surround: OFF Equalizer: Normal On the folder or file list screen, Select "Settings" Select and set the required items below ep [Set] Show thumbnails: Set display of the music data list screen.
Page 375: Other Convenient Functions
Other Convenient Functions Multiaccess....................Multiaccess Multitask......................Multitask Turning power ON/OFF automatically ........Auto power ON/OFF Setting the timer with a simple operation............Timer Ringing alarm clock at specified time............Alarm clock Turning power ON automatically at set alarm time ....Alarm auto power ON Managing schedule..................
Page 376 During a voice call, se21 Multiaccess Multiaccess Multiaccess is the function that allows you to use 3 functions; voice call, packet communication and short message (SMS) simultaneously. I The icon indicating the function in progress appears on the task area. I Operations are enabled while switching active New Task start menu functions.
Page 377 INFORMATION "i-mode" Even when Auto power OFF is set to "ON", when the specified time arrives while FOMA terminal is in any mode except stand-by, the power is not turned OFF. The power is turned OFF after exiting each function.
Page 378: Alarm Clock
[ ] is pressed, the timer stops. specified time. I To stop the timer sound while the FOMA terminal When you select "i-motion", "Melody" or ], P or M. is folded, press any one of side key [ "Music", select alarm clock sound.
Page 379 Snooze operation is started when Snooze This function does not operate if power supply to is set to "ON". FOMA terminal is stopped in a way other than power I While alarm clock is stopped with Snooze OFF operation or Auto power OFF settings, for example, by removing the battery pack.
Page 380 Scheduler Setting display style for calendar <Calendar view mode> Managing schedule Default Scroll mode: Monthly mode This function allows you to save various Display mode: Normal mode schedules. At the specified time, you will be notified with the display and/or alarm. p (1 sec.
Page 381 (Item icon): Setting holiday <Holiday settings> Select an item icon. Schedule (Content entry field): Holidays can be changed and newly saved. The schedule content entered for the I Up to 5 holidays can be saved newly. selected item icon is displayed. Change data p (1 sec.
Page 382 h to switch to the Reminder screene Image: To display an image on the schedule Select and set the required items below reminder screen, select "Yes", select "Image" and select the image. Flash graphics cannot be set. When "No" is set, the default image is displayed.
Page 383 Sets schedule reminder default values for the schedule details screen. saving a schedule from the calendar screen. I To stop the alarm while the FOMA terminal is Set by quick-schedule: ], P or M. folded, press any one of side key [...
Page 384 Select a schedule to check. <Example> Sending a message with a schedule entered from the Day view screen p (1 sec. or more)eSelect the saved schedule day to send as a message Place the cursor on the schedule to send as a message and a [ Write].
Page 385 <Example> Deleting the schedule on the Day view INFORMATION screen To use the second or subsequent phone number or p (1 sec. or more)eSelect the saved mail address registered in a phonebook, select a member from the Members screen and display the schedule day to delete target phone number or mail address from the me3e1-4...
Page 386: Custom Menu
Register the menu item. Custom menu MENU 8222 me11 Adding a person to item : Registering often-used functions eSelect a person to register from the In addition to the normal menu that is displayed by phonebook pressing m by default, your own menus can be The person is stored.
Page 387 Adding menu items in the group : Using person The custom menu can have up to 3 levels. A group (third level) in the second level does not allow registering groups. a Select a group. Place the cursor on a person and perform the necessary operation.
Page 388 me5eSelect an Changing an icon : Using entry function of Turn-display option icon Press m5p to restore the icon. Display the character entry screen in Changing a group name : me6e vertical display. Enter the group nameep Turn the display 90 degrees to the right me3eSelect Deleting a menu item : or left.
Page 389 To make a call specifying conditions, press m4. Your own phone number is recorded in the UIM. Other items are registered to the FOMA terminal. Setting caller ID : Changing the mail address in User information does a Display the phone number detail screen.
Page 390 Recording your own voice during party while talking stand-by MENU 473 I Operate FOMA terminal in open state. I During a voice call, only the voice of the other party is recorded. During a videophone call, the Side key [ ] (1 sec.
Page 391 Making a voice call : Place the cursor on the Note: For FOMA terminals before 901i Series, the call voice memo while talking and n. costs are stored on the UIM, but they cannot be Press t to make a videophone call.
Page 392 For the procedure for confirming i-mode When the call cost has exceeded the limit fees, refer to "Mobile Phone User's Guide [i-mode]". When the FOMA terminal is turned OFF, the previous Call cost icon call duration remains, but the previous call cost is displayed as "...
Page 393: Calculator
"Call cost reached To paste the copied number, press m limit." appears on the display. However, the alarm does not sound when FOMA terminal is A copied number remains recorded until being folded during call or communications or FOMA terminal is turned OFF;...
Page 394 Creating an i-mode mail : On the List of Checking notes notes screen, place the cursor on the note and me7 me72 When operating from the Display notepad screen, press m5. Select a note to check. If the Note content contains phone numbers, mail addresses and URL,...
Page 395: Using Dictionaries
Using Dictionaries chronologically. Select a word from search records. You can use Japanese, Japanese-English and The search result screen is displayed. English-Japanese dictionaries in FOMA terminal. Deleting a search record : Place the cursor <Example> Searching Japanese-English me1e dictionary on the word to delete and Select "Yes"...
Page 396 Setting switch operation of earphone/ INFORMATION microphone <Headset key control> In reply to a videophone call received, a camera image is sent when FOMA terminal is open or a Default Control function: OFF substitute image set in Image setting (Videophone image) is sent when FOMA terminal is folded.
Page 397: Resetting Functions
INFORMATION I This function is unavailable to incoming calls The FOMA terminal is started normally even when during another call. Quick start-up is set to "ON". I This function is not available in Public mode.
Page 398 - Chaku-moji message (including sent messages) - Osaifu-Keitai compatible i-αppli and the related data - Recorded messages (including the recorded greeting - Data saved, registered or set in the FOMA terminal and the message) microSD memory card - External device...
Page 399 Selecting how incoming calls are handled while talking ....Arrival call act I This manual describes the outline of network services from the aspect of the operation procedure using Menu on the FOMA terminal. For details, see "Network Services Operation Guide".
Page 400: Network Services Available
Dual network Required Charged P403 If there is an incoming voice or videophone call service while FOMA terminal is in a location where radio Multi number Required Charged P403 waves are hard to reach or powered OFF or if you...
Page 401 Activate m2 Deactivate Voice Mail Activates Notify missed call to m3 Set ring time notify calls received with your FOMA terminal turned OFF or out eSelect "Yes"eFollow the voice e Play of service area by SMS when the messages...
Page 402: Call Waiting
Basic flow of Call forwarding service Step 1 Activate Call forwarding service. Step 2 Set the phone number of forwarding destination. Step 3 Call comes in to FOMA terminal. Step 4 Unanswered calls are forwarded to the previously specified destination. Network Service...
Page 403: Officeed
USSD code a Area display on FOMA terminal. Set whether to display Name: setting the stand-by display when FOMA Enter a display name (service terminal is in OFFICEED area. Default ePress 1 or 2 name). Up to 10 two-byte or 20 one- b Start eSelect "Yes"...
Page 404: Setting Remote Control
Nuisance call barring service selecting a menu item Nuisance call barring service Menu items Functions and operations You can set FOMA terminal to automatically reject a Guidance Switches the voice prompts for nuisance calls. After registering a phone number of setting...
Page 405: Dual Network Service
In addition to Basic Number, you can add and use phone number on FOMA terminal. up to 2 more numbers as phone numbers of the Even in a location out of the FOMA service and FOMA terminal: Additional No.1 and No.2. I Removing or replacing UIM may cause Multi inside the mova service area, you can communicate with others by using mova terminal.
Page 406: Set Arrival Act
Members list of Scheduler, press m and forwarding destination set in Call select "Call option". forwarding service. When operating from FOMA terminal phonebook or b Voice mail Handles incoming calls received UIM phonebook list, press m and select "Mail/Call during a call or 64K data option"...
Page 407 Data Communication Data Communication....................406 Before use........................406 Flow of setup for data communication ..............408 AT commands ....................... 409 CD-ROM ......................... 409 Introduction to DoCoMo keitai datalink ..............409 For Data Communication details, see "PDF version 'Manual for Data Communication'" in the CD-ROM attached.
Page 408: Data Communication
Data such as phonebook or messages can be sent upgraded OS. or received with no charges required. I This FOMA terminal is not applicable to packet or I You can also send and receive data to/from other 64K data communications overseas.
Page 409 FOMA terminal and PC: established. If user authentication is required, you - USB cable attached to F903i or FOMA USB connection must use your communication software or dialup cable (optional) network to enter your ID and password. Your ID ®...
Page 410: Flow Of Setup For Data Communication
A number used to control dialup connection Installing FOMA PC configuration (APN) for packet communication to be software registered in FOMA terminal. 10 numbers from 1 to 10 are available for FOMA terminal. I DNS (Domain Name System) Setting 64K Setting packet...
Page 411: At Commands
For operations after installation, see Help in the ROM. software. Using DoCoMo keitai datalink requires USB cable Software/PDF included attached to F903i or FOMA USB connection cable - F903i Communication configuration file (optional). - FOMA PC configuration software - FirstPass PC software...
Page 413: Character Entry
Character Entry Entering characters....................... 412 Entering characters using 5-touch input method..... 5-touch input method Entering characters using useful entry function............415 Storing fixed phrase .................. Save phrase Copying/cutting and pasting characters ..............417 Entering characters using code ............KUTEN code input Storing frequently used words..............
Page 414: Entering Characters
For some of the entry field to enter date and time or numbers, you can enter numbers by Entering characters selecting the entry field and pressing j. Procedures for entering characters in Phonebook Submenu operations from character or mail is described below. entry screen I There are 2 methods for entering characters: 5- touch input method and Slot input method.
Page 415 Press g [Select]. During character entry, the following operations are enabled: t : Changes upper/lower case. Available items and input modes a : Returns to the previous character. (eg.: Items Input mode c : Cancels entered characters. Hiragana/kanji character * : Adds voiced/semi-voiced sound. One-byte katakana (eg.: One-byte alphabetic characters...
Page 416 Press g. Inserting characters : Press k to move the cursor to the insertion Fix all point and enter the character. The entered character is inserted at the cursor position. Deleting characters : When the cursor is inside an entered character string Convert (Example:...
Page 417 deSelect the option On the character entry screen, p. Input log field The input log field is displayed on the first page of Pictogram 1 and 2 of the pictogram list, and one-byte/two- byte symbols of the symbol list. Pictogram list Press t or a to switch between pages.
Page 418 Deco-mail pictogram can be inserted also by pressing Quoting password data m on a message text or Edit signature entry screen, selecting "Decorate mail" "Insert image" and then On the character entry screen, selecting "Phone memory" or "microSD" (if microSD 43eAuthenticate is inserted).
Page 419 I Copied or cut characters remain recorded and When you edit a stored fixed phrase, a can be pasted as many times as needed before confirmation screen is displayed. Select FOMA terminal is turned OFF. "Yes" to replace or "No" to cancel the operation. Copying/cutting characters Storing words during character entry Select an entered character (string) to copy/cut.
Page 420: Storing Frequently Used Words
On the character entry screen, place the To check the stored word, place the cursor on the word and press p. You can edit it by cursor at the position to paste pressing g. characters and me3 To delete a word, place the cursor on the The characters are inserted at the cursor word to delete and press m, and select position.
Page 421: Using Downloaded Dictionary
Select the start point. Up to 12 two-byte or 24 one-byte characters can be entered. Press mg to select the whole sentence. Go to Step 4. Enter the password in the password On the message text entry screen, press a entry field.
Page 422: Setting Input Method
Press g. Slot input Input mode The same operation can be performed by pressing ag. Input bar Text input method Setting input method Slot input board Default Input method: 5-touch Press t to switch between the upper and Input prediction: ON Auto cursor: Normal lower slot of the input bar.
Page 423 Overseas Use Overview of international roaming service (WORLD WING)........422 Services available overseas ..................422 Preparing and checking for using FOMA terminal overseas ........423 Making a call from overseas ..................423 Receiving a call from overseas ..................424 Setting type of searching for telecommunications carrier ..
Page 424: Overview Of International Roaming Service (World Wing)
FOMA outside FOMA network service area. terminals overseas. I If you subscribed to FOMA service on or after *2: Automatic update is suspended automatically when you September 1, 2005, separate subscription is not are connected to an overseas telecommunication carrier.
Page 425: Preparing And Checking For Using Foma Terminal Overseas
I Each inquiry number must be prefixed with I FOMA terminal is set so that, when it is turned "Phone cords for Universal number" or ON overseas, an overseas telecommunications "International access number" of a country or carrier is automatically searched for and area you are staying.
Page 426: Receiving A Call From Overseas
Making a call to WORLD WING user reconnection when starting international roaming overseas or FOMA terminal is placed outside a current network. To make a call, enter "+" and Japan's country code I Setting may be disabled for some wave and/or "81"...
Page 427 Adding a telecommunications carrier not When FOMA terminal is placed outside a connected registered in FOMA terminal network of the telecommunications carrier selected, research for telecommunications carriers or change me8913 the setting to "Auto".
Page 428: Activating Roaming Guidance
"DoCoMo" network is being used. Even with Roaming guidance set to Activate, a No network name appears when FOMA terminal is guidance in a foreign language may be played outside a service area, regardless of the settings of depending on the conditions of a this function.
Page 429: Using Network Services During Roaming
Services available overseas Using network services during roaming You can make settings from overseas for Voice Mail, Call forwarding and other services. I For details of network services, see "Mobile Phone User's Guide [World Services]" and/or "Network Services Operation Guide". I Remote control must be set to Activate in advance.
Page 431 Options and related devices ..................461 Data interchange with external device FOMA F series data link software ................462 Playing movie data transferred from external device on FOMA terminal ....462 Playing movie data recorded with FOMA terminal on PC ........463 Troubleshooting Troubleshooting......................
Page 432: Menu List
Menu list The menu list for shortcut operations from the stand-by display (FOMA terminal open) is shown below. Reading list I Settings of menus in can be restored to the default in Reset. I A menu can be selected by pressing m and then sequentially pressing the digits (item numbers) given on the left end of the menu.
Page 433 c i-αppli Menu Default Page f MessageR&F Menu Default Page c Message settings a Software list P265 (d for 1 sec. or more) b Message Select All P249 retrieval b i-αppli settings c Attachment Auto play a Sort software By download time P277 P251 auto-play...
Page 434 f LifeKit (Continue) g Stationery Menu Default Page Menu Default Page c ToruCa a Scheduler P283 P378 (p for 1 sec. or more) d IC card b Notepad P391 a IC card content P281 c Alarm clock P376 b Lock/Unlock ( P287 d Calculator 1 sec.
Page 435 Menu Default Page Menu Default Page a Alerts & Sounds b Display a Ring alerts & Sounds a Stand-by display g Call session a Image/i-αppli [Vertical position/ Horizontal position] P123 d Reconnect High alarm P119 Style theme default alarm b Clock format Style theme default P138 e Low Battery...
Page 436 Select (Japanese) language d Headset c Style theme a Alert Headset only P395 a Style theme preference Same as FOMA terminal P121 color b Auto answer Auto answering: OFF P395 b Timed theme P122 c Headset key Control function: OFF P394 d Security &...
Page 437 Menu Default Page Menu Default Page e Call & Answer f Videophone/ToruCa/PushTalk g Call session c PushTalk (PT) a Noise g i-mode arv. PushTalk preferred reduction act:PT b Close settings h P-Talk End the call speakerphone h Self mode ( P149 g Other for 1 sec.
Page 438 h Settings & NW services (Continued) Menu Default Page h NW Services Menu Default Page g Other h NW Services a Additional service a Voice mail a Register a Voice Mail service USSD g Check P401 b Record messages reply b Tone/Vibration Voice Mail alert: ON message...
Page 439 Menu Default Page Menu Default Page h NW Services i Roaming/Call assist g Other a Intn'l roaming h Set arrival act h Roaming P427 guidance(Int.) a Activate i Bar calls at roaming P404 b Deactivate a Bar c Check incoming setting call i Arrival call act...
Page 440: Data Stored By Default
When "Simple display" is set on Normal of Menu settings a Menu bBookmark Note: "Simple display" is disabled when the screen display is English. Data stored by default Stand-by image/i-motion Stand-by image (for vertical display) (Bianco 1)* (Nero 1)* (Rosso 1)* (Cobalto 1)* (Advanced (French...
Page 441 Clock style Analogue Digital 1 Digital 2 Digital 3 Digital 4 World Time Clock i-motion sparking stars *1: Images are animations (Flash graphics). *2: Displayed digits vary depending on the time. Frame I An image is put in Standby size (240 x 320) QCIF size (176 x 144) Appendix/External Device Networking/Troubleshooting Continuee...
Page 442 QCIF size (176 x 144) (Continued) I When the frames stored by default are deleted, they can be downloaded from " (@ F mobile phone supporters)" site. P442 Stamp Deco-mail picture ©Disney Appendix/External Device Networking/Troubleshooting...
Page 443 (Thank you 2) (I’m Sorry 1) (I’m Sorry 2) (Where?) (Good morning) (Good night) (Congratulations) (News) (Penguins) (Happy birthday) PDF data (Services available for (Japanese Calendar/Christian (Length and weight FOMA terminal) Calendar/Oriental Zodiac quick conversion tables) reference matrix) Appendix/External Device Networking/Troubleshooting Continuee...
Page 444: List Of Keypads And Character Assignments (5-Touch Input Method)
Access method to (@ F mobile phone supporters) (As of October, 2006) iMenu (Menu/Search) (Mobile phone manufacture) (@ F mobile phone supporters) QR code for Note: The access method may be changed without previous notice. site access List of keypads and character assignments (5-touch input method) In 5-touch input method, characters are assigned to the keypads as shown in the table below.
Page 445: List Of Characters Assigned To Input Bar (Slot Input Method)
List of characters assigned to input bar (Slot input method) Input bar Hiragana/kanji mode (two-byte) Input bar Katakana mode (one-byte) Upper Upper slot slot Lower Lower slot slot Line feed Line feed Input bar Alphabet mode (one-byte) . / @ : _ [ ] ^ ` { Upper...
Page 447 I Pictogram supported (22 items) I English phrases (46 items) Hello! How are you? Hi! What's up? Long time no talk. How are you doing? Good morning. Have a nice day! Good night. Good-bye. Talk to you soon. See you. Bye ;-) I had fun today, thanks.
Page 448: Pictogram And Symbol List
Pictogram and symbol list Pictogram list Pictogram 1 Pictogram 2 Deco-mail pictogram (Pictogram D) © I When the Deco-mail pictogram (Pictogram D) stored by default is deleted, it can be downloaded from " (@ F mobile phone supporters)" site. P442 Symbol list One-byte Two-byte...
Page 449: List Of Pictogram Entries And Conversion
List of pictogram entries and conversion Enter the readings in hiragana/kanji mode and convert character. P413 Pictogram Reading Pictogram Reading Appendix/External Device Networking/Troubleshooting Continuee...
Page 450 Pictogram Reading Pictogram Reading Appendix/External Device Networking/Troubleshooting...
Page 451 Pictogram Reading Pictogram Reading Appendix/External Device Networking/Troubleshooting Continuee...
Page 452 Pictogram Reading Pictogram Reading Appendix/External Device Networking/Troubleshooting...
Page 453: List Of Entries And Conversion Of Special Symbols
List of entries and conversion of special symbols Enter the readings in hiragana/kanji mode and convert character. P413 Reading Symbol Reading Symbol Appendix/External Device Networking/Troubleshooting Continuee...
Page 454: Smiley List
Reading Symbol Reading Symbol Reading Symbol a b c d e f g h i j k l m n o p q r s Note-1: The special symbols may look different from the actual display. Note-2: Special symbols can consist of either one-byte characters only, two-byte characters only or of both one- and two-byte characters.
Page 455 I Greeting and reply (19 items) (Continued) Smiley Reading Smiley Reading I Laugh and happy (34 items) Smiley Reading Smiley Reading I Abashed and angry (18 items) Smiley Reading Smiley Reading Appendix/External Device Networking/Troubleshooting Continuee...
Page 456 I Cry and sad (19 items) Smiley Reading Smiley Reading I Surprised (28 items) Smiley Reading Smiley Reading I Question and upset (21 items) Smiley Reading Smiley Reading Appendix/External Device Networking/Troubleshooting...
Page 457 I Others (61 items) Smiley Reading Smiley Reading Note: Some smileys may look different from the actual display. Appendix/External Device Networking/Troubleshooting...
Page 458: Combination Of Multiaccess Functions
Combination of Multiaccess functions Availability of operations of processes generated or to be performed for each operation currently in progress is shown below: I When making a videophone call with an external device connected, see "During 64K data communication". I "In i-mode" (i-mode connection) includes i-Channel communications (except for information reception). I i-mode mail reception includes reception of MessageR/F and i-Channel information.
Page 459 Processes that occur Packet 64K data or are performed communication Data transfer communication with a PC Current status Send Receive Send Receive Send Receive Send Receive During a voice call During a videophone call During a PushTalk session In i-mode During connection using Full Browser During i-mode mail...
Page 460: Combination Of Multitask Functions
Combination of Multitask functions Whether or not selections can be made in New Task start menu combined with the currently running function is described in the table below. : selection possible : cannot be selected Appendix/External Device Networking/Troubleshooting...
Page 461 Appendix/External Device Networking/Troubleshooting Continuee...
Page 462 Note: Some selectable operations may be unavailable depending on the condition of the FOMA terminal. Appendix/External Device Networking/Troubleshooting...
Page 463: Services Available For Foma Terminal
P002 I Stereo earphone set with switch P001 October, 2006). Note that calls to 110, 119 or 118 from the FOMA I Remote controller with microphone F01 terminal cannot be located. Since the police or fire I Earphone terminal P001...
Page 464 The same data item may go under a name in the data F903i PC, etc. memory card link software that differs from that used in the FOMA I Playing multimedia data in microSD memory terminal. card P336 The calendar display range of the data link software...
Page 465: Troubleshooting
(or ver. 6.3 + 3GPP), which is provided by Apple You can play movies (MP4 format) recorded with Computer, Inc. FOMA terminals on PC by storing in microSD QuickTime Player can be downloaded from the memory card or sending using data transfer such website below: as message attachment.
Page 466 P35, P147 When Auto power ON is set to "ON", FOMA terminal cannot be turned ON at the specified time. Unregistered caller cannot be selected. If the power is turned OFF in a manner other than...
Page 467 The surface of the sensor may be wet or dew may terminal and microSD memory card, reactions on have condensed on the surface. Wipe the water off the FOMA terminal screen may have a delay. with a soft cloth before use. Fingerprint authentication disabled with FOMA terminal connected to PC, etc.
Page 468 Caller If FOMA terminal is left open for a while with the ID notification do not operate. same screen displayed, afterimages of that screen...
Page 469: Error Messages
Error messages Error messages Major error messages displayed on the FOMA terminal are shown in the English alphabetical order as follows: The "(number)" or "(XXX)" in error messages is a code used to distinguish the error sent from i-mode Center.
Page 470 Quit. When "microSD" has been The i-mode Center is busy. Retry specified as the destination for There are errors in the FOMA later. saving still images or movies terminal and PushTalk Inbox full. Unable to retrieve recorded with the camera or phonebook memories, disabling new messages.
Page 471 Infrared/iC transmission No UIM Invalid UIM. download/ Memory is full. Unable to save. inserted. Unable to start Upgrade/start not possible. FOMA terminal does not have requested software. This message appears when UIM enough memory space and the Because no UIM is inserted, the is replaced after associating UIM SMS cannot be saved.
Page 472 Set the time and date correctly communications facilities or before connecting. congestion in voice line network/ Root certificate is not valid. packet communications network. FOMA terminal certificate is Retry later. invalidated by setting. To connect, change the setting. P205 Appendix/External Device Networking/Troubleshooting...
Page 473 The site certification is not transmission INBOX is full. Save supported by FOMA terminal. To SSL session was terminated. the data from INBOX into FOMA connect, select "Yes"; to stop, There is some problem with the terminal or delete it.
Page 474 URL P259, P260 data, check that it is not expired exceeds that can be registered. using a PC and connect FOMA UIM not inserted. Requested Usage is currently restricted. Try terminal to the PC for service unavailable.
Page 475 The subscriber will be charged for the repair of items not covered in I A written warranty is provided with every FOMA the warranty or repairs of defects resulting terminal make sure that you receive it. Store the from misuse, accident or neglect, etc.
Page 476: Software Update
Software update (downloading or rewriting) may on the failure level.) take time. Note: Depending on the size of data saved in the FOMA If software update is executed when "ON" is set for terminal, transfer may take a time or be disabled.
Page 477 Never remove the battery pack while updating software. The update fails. Software update can be done even when various data, such as a phonebook registered in the FOMA terminal, camera images, downloaded data, are Software update screen remaining; however, note that data protection sometimes cannot be secured according to the When update is necessary, "Update is...
Page 478 Download is complete and after about 5 Updating software immediately seconds, software updating is <Immediate update> automatically started. I Immediate update may not be available when the Pressing g will immediately start rewriting. server is busy. During updating, the light flashes. All key operations are disabled and the updating Select "Now update"...
Page 479 b Select preferred day. Updating software at pre-specified Availability for reservation at each time time <Reserved update> period will be shown: : available : barely available When downloading takes time or the server is busy, you can choose to set the time to start software update in advance by communicating with the server.
Page 480: Scanning Function
Before the reserved time, make sure that the battery is fully charged and the FOMA terminal definition does not exist, this function will not be able to prevent those troubles from occurring.
Page 481 When the correct date and time have not been set on the FOMA terminal, the pattern definitions cannot be updated. Updating pattern definition is stopped with a voice call arrived. When there is an incoming videophone...
Page 482: Specifications
"stationary", "moving", and "out of service area" status. I Continuous call time indicates the estimated call time that FOMA terminal can send or receive signals normally. I The continuous call (communication) or continuous stand-by time will be less when Specifications performing i-mode communication.
Page 483: Sar Certification Information
Unsent Up to 200 Up to 100 phonebook, mail and other data to a PC. message The display of the data in FOMA terminal file size may Mail Up to 100 contain some error depending on the function that template handles the data.
Page 484: Export Administration Regulations Of Japan And The U.s
In general, the Declaration of Conformity closer you are to a base station antenna, the lower the power output. The product "FOMA F903i" is declared to conform with the essential requirements of European Union Directive 1999/5/EC Radio and Export Administration Telecommunications Terminal Equipment Regulations of Japan and the U.S.
Page 485: Index/Quick Reference Manual
INDEX/Quick Reference Manual INDEX..........................484 Quick Reference Manual ....................490...
Page 486 INDEX Using INDEX You can also use this index listing function names <Example> Displaying Chara-den and keywords as "Alphabetical keyword reference". Chara-den......73, 322 For functions such as "Set" and "Delete", first search Action........323 Deleting ......345 by a function name of the first level (bold) and then Detail information/Edit detail by an index item of the second layer.
Page 487 Confirmation screen operation Auto answer ....... 395 Character encode (Switch Headset key control ... 394 encode) ........191 Connecting PC to FOMA Earpiece ........24 Characters entry ....412 terminal ........340 End alert ......... 352 Block conversion ....414 Connecting using USB cable English guidance ....
Page 488 Template ......223 Mail setting (i-mode Center) Changing Host ....200 i-mode password ....140 Ticker ........211 i-mode settings ..... 200 Mail settings (FOMA terminal) Ticker setting...... 212 i-motion Movie/i-motion Trial service......211 i-motion mail Mail template ......223 i-Channel ticker .....
Page 489 Quoting ....... 416 Password manager....419 Copying/Moving data from Introduction play ....366 Pause ("P") ....... 56 FOMA terminal ....333 Playing ........ 366 PDF data ......... 354 Copying/Moving data to Saving music data ..... 362 Capture screen ....358 FOMA terminal ....
Page 490 Caller ID settings....105 Privacy mode......150 Save phrase ......417 Copying ......102 Programed activation ... 288 Save shortcut ......193 Copying to UIM/FOMA P-Talk speakerphone ....90 Save word......418 terminal ......103 Public mode (Drive mode)..67 Scanning function....478 Deleting ......
Page 491 UIM operation restriction Inserting (i-mode mail) ..217 Clipping....... 311 function ........36 Inserting (SMS) ....256 Comment ......345 UIM (FOMA card) Setting......... 248 Continuous shoot....167 Attaching/Removing .... 35 Silent mode....119, 120 Creating animation .... 310 Functional differences ..36 Simultaneous sending ..
Page 492 Videophone settings WORLD CALL......58 (Operation) ......77 WORLD WING ......37 View preference ..53, 101, 244 Web to Numeric Voice Mail service ....398 Mail ........245 Voice mail(Int.) ...... 427 Site........199 3D display (menu) ....31 Voice memo ......
Page 499 In a quiet location like a restaurant or hotel lobby, pay attention to the volume of your voice and ring alert, etc. when using your FOMA terminal. In town areas, while using your FOMA terminal, be sure not to block foot or vehicular traffic.
Page 500 Please check on the number before dialing. 0120-800-000 (toll-free) For further information, please refer to the list of service Please check on the number before dialing. stations supplied with your FOMA terminal. For misplacement, stealage and billing overseas For malfunctions overseas <DoCoMo Information Center>...
Page 501 Flow of setup for data communication....3 Connecting PC to FOMA terminal ....5 Installing communication configuration file (driver) .
Page 502 I FOMA terminal does not support fax communication or Remote Wakeup. I When performing data communication using PDA of DoCoMo such as musea or sigmarion II connecting with FOMA terminal, update of musea or sigmarion II is required. For details on update such as method, refer to the DoCoMo website.
Page 503: Operating Environment
® - Attached CD-ROM "CD-ROM for FOMA F903i" Note: Please use USB cable attached to F903i or purchase a FOMA USB connection cable (optional). USB cable for PC is not available because the connector type is different. Usage precautions Internet service provider usage charges When using the Internet on a PC, usage charge to your Internet service provider (hereinafter referred to as Provider) is usually required.
Page 504 - You must be within the FOMA service area. - Packet communication requires an access point that supports FOMA packet communications. - 64K data communication requires a dialup connection that supports FOMA 64K data communications or ISDN synchronized 64kbps. Note that even when the above requirements are satisfied, you may not be able to perform data communication if base station traffic is heavy or the signal quality is poor.
Page 505 64K data communication. FOMA PC configuration software When the FOMA PC configuration software (found on this CD-ROM) is installed on the PC, a number of settings required for packet communication or 64K data communication can be set from PC by simple operation.
Page 506 Be careful not to give excessive force to the connecter of USB cable when connecting/disconnecting the cable from FOMA terminal. When disconnecting the connector, be sure to pull it straight while pressing the release button. Applying an excessive force to disconnect the connector may give damage to it.
Page 507 Installing communication configuration file (driver) To make data communication by connecting FOMA terminal to a PC, the communication configuration file is required. Install the file before connecting FOMA terminal for the first time to the PC. Installing communication configuration file (driver) I Before start the operation, refer to "Precautions for installation/uninstallation".
Page 508 Click [ (Start installation)]. The attached USB cable can be used. When a message indicating to connect the FOMA terminal to the PC appears, connect the FOMA terminal to the PC. The installation in progress screen is displayed. Connect the FOMA terminal while the power is ON.
Page 509: Control Panel
When a message indicating that the device is deleted appears, select [ (Yes)] to continue the installation. Checking communication configuration file (driver) I When the PC does not detect the FOMA terminal correctly, settings and communication cannot be performed. <Example> To check the driver in Windows XP...
Page 510 Device type Device name USB (Universal Serial Bus) FOMA F903i (USB (Universal Serial Bus) Controller) FOMA F903i Command Port (COMx) (Port)(COM LPT) (COM and LPT) FOMA F903i OBEX Port (COMx) (Modem) FOMA F903i *: Depending on the PC environment, x represents different numbers.
Page 511 Uninstalling communication configuration file (driver) I Before start the operation, refer to "Precautions for installation/uninstallation". I Before operating, remove the FOMA terminal from the PC. <Example> Uninstalling the driver under Windows XP Click [ (Start)] " (Control panel)" (Add/delete Programs)] icon.
Page 512 INFORMATION When the installation fails or "FOMA F903i USB" is not displayed on the screen of Step 2, execute Step 1-3 in "Installing communication configuration file (driver)" again to install. Communicating using FOMA PC Configuration Software The FOMA PC configuration software allows you to perform setup for the communication by simple operation.
Page 513 Click [OK] and go to Step 3. CD-ROM drive name varies depending on PC to be used. Click [ (Data link software/Configuration software)] (Install)] of "FOMA PC (FOMA PC configuration software)". Click [ (Next)]. Read the content of the screen and click [ (Yes)] if you agree to the license agreement.
Page 514 Check that " (Reside in task tray)" is selected and click (Next)]. The "W-TCP (W-TCP setup)" resides in the task tray after the setup. This setting is for optimum control of W-TCP communication setting and cancellation. Residing in task tray is recommended. You can change the setting of resident software after the installation.
Page 515 (Done)]. Setting packet communication by easy setup Easy setup of FOMA PC Configuration Software allows simple dialup setting for FOMA by making selections and entries according to the instructions displayed. I Before operating, make sure that the PC and FOMA terminal are properly connected.
Page 516 Select " (Packet communication)" and click [ (Next)]. Select " mopera U (mopera U connection)" or " mopera (mopera connection)" and click [ (Next)]. After selecting " mopera U (mopera U connection)" and clicking [ (Next)], a subscription confirmation message appears. If you have already subscribed, click [ (Yes)].
Page 517 U supports both PPP (PPP connection) and IP (IP connection). mopera supports only PPP (PPP connection). This FOMA terminal does not support IP (IP connection) or packet communication overseas. Set " (Selection of the users that are allowed to access the connection)"...
Page 518 PC appears. Performing communication Using other providers <Example> Setting under Windows XP Click [ (Start)] Select " (All Programs)" (" (Programs)" for Windows 2000) "FOMA PC (FOMA PC Configuration Software)" and click "FOMA PC (FOMA PC Configuration Software)" (Easy setup)].
Page 519 Select " (Packet communication)" and click [ (Next)]. Select " (Others)" and click " (Next)". Click [OK].
Page 520 (cid) 3 to connect to mopera U. Set the dialup connection (APN) to number (cid) 2 or 4-10. a Click [ (Add)]. b Enter a dialup connection (APN), which supports the FOMA packet communication of your provider, etc., in " (APN) (Dialup connection (APN))"...
Page 521 Click [OK]. Check the connection name in " (APN) (Selection of dialup connection (APN))" and click [ (Next)]. " (APN) (Dialup connection (APN))" and " (Connection method)" set in Step 6 is displayed in " (APN) (Selection of dialup connection (APN))". If you select "...
Page 522 Check that " (Optimize)" is selected and click [ (Next)]. This screen is not displayed if optimization has already been performed. Check " (Settings)" and click [ (Done)]. Click [OK]. The PC may need to be rebooted depending on the settings. Click [ (Yes)] when a message that prompts you to reboot the PC appears.
Page 523 <Example> Setting under Windows XP Click [ (Start)] Select " (All Programs)" (" (Programs)" for Windows 2000) "FOMA PC (FOMA PC Configuration Software)" and click "FOMA PC (FOMA PC Configuration Software)" (Easy setup)]. Select "64K (64K data communication)" and click " (Next)".
Page 524 (one-byte) cannot be used: ?!<> Check that "FOMA F903i" is set for " (Modem selection)". This FOMA terminal does not support 64K data communications overseas. Set " (Selection of the users that are allowed to access the connection)" and click "...
Page 525 Click [OK]. Performing communication Using other providers <Example> Setting under Windows XP Click [ (Start)] Select " (All Programs)" (" (Programs)" for Windows 2000) "FOMA PC (FOMA PC Configuration Software)" and click "FOMA PC (FOMA PC Configuration Software)" (Easy setup)].
Page 526 You cannot use "." (one-byte) at the beginning of " (Connection name)". Also, the following characters (one-byte) cannot be used: ?!<> Check that "FOMA F903i" is set for " (Modem selection)". Enter " (Phone number)" correctly based on the data given by provider, etc. The following...
Page 527 Advanced settings (TCP/IP settings) Click [ (Set detail info)] to display "IP (IP address)" and " (Name server)" setting screens. Register addresses, etc., when required as dialup information, based on various information given by the provider, etc. Set " (Selection of the users that are allowed to access the connection)"...
Page 528 (Create dialup shortcut on the desktop)" is not selected while settings or when communication setup is performed without using FOMA PC configuration software under Windows 2000, the connection icon will not be created. Use the following connection procedure starting from the Start menu.
Page 529 The transmission speed displayed on your PC may differ from actual speed. The transmission is available only with the FOMA terminal that was connected when the icon was created. Optimizing packet communication setup <W-TCP setup> The W-TCP setup is a TCP parameter tuning tool for optimizing TCP/IP transmission capacity during packet communication in the FOMA network.
Page 530 System optimization can be performed for each dialup connection under Windows XP. Click [ (Start)] Select " (All Programs)" "FOMA (FOMA PC Configuration Software)" and click "FOMA PC (FOMA PC Configuration Software)" [W-TCP (W-TCP setup)]. Starting W-TCP setup from task tray Click in the task tray.
Page 531 Activating and deactivating system optimization under Windows 2000 Click [ (Start)] Select " (Programs)" "FOMA PC (FOMA PC Configuration Software)" and click "FOMA PC (FOMA PC Configuration Software)" [W-TCP (W-TCP setup)]. Starting W-TCP setup from task tray Click in the task tray.
Page 532 I Before operating, make sure that the PC and FOMA terminal are properly connected. I The dialup connections (APN) can be set for registration numbers (cid) between 1 and 10 in FOMA terminal. "mopera.ne.jp" (APN) to connect to mopera is set in cid1 and "mopera.net" (APN) to connect to mopera U is set in cid3 by default.
Page 533 Save the settings as a file to back up dialup connection (APN) settings registered in FOMA terminal or save dialup connection (APN) settings during editing. Importing settings from file Click " (File)" " (Open)". Import settings from a file to edit access point (APN) saved on the PC or to write to the FOMA terminal.
Page 534 (APN). If "IP (IP connection)" is selected, you cannot write the settings to FOMA terminal. The dialup connection (APN) setting is information saved in the FOMA terminal. When connecting another FOMA terminal (terminal replaced by repair, etc.), re-register the APN.
Page 535 (FOMA PC configuration software set up)" is displayed and click [ (Yes)]. The uninstall process of the FOMA PC configuration software starts. Deactivating optimization When optimization is active, a screen is displayed asking whether to deactivate it. Click (Yes)] and set whether to reboot PC immediately on "...
Page 536 Click [ (Done)]. Setting communications without using FOMA PC Configuration Software The method of dialup connection setup without the FOMA PC configuration software is explained. Flow of dialup network setting Flow of setup for data communication Setting dialup connection (APN) for packet communication * The 64K data communication and packet communication via mopera U or mopera dialup connection do not require this setting.
Page 537 The dialup connections (APN) for packet communication can be set for registration numbers (cid) between 1 and 10 in FOMA terminal. "mopera.ne.jp" (APN) to connect to mopera is registered in cid1 and "mopera.net" (APN) to connect to mopera U is registered in cid3 by default. For connecting to other providers or corporate LANs, register APN for cid2 or cid4-cid10.
Page 538 [OK]. The area code differs depending on the PC environment. The code does not relate to Dialup connection (APN) setup. So no need to change. Check that "FOMA F903i" is set for " (Connection procedure)". Click [ (Cancel)] on the "...
Page 539 Caller ID is your important information. Take care when deciding to disclose your caller ID. I If "Hide caller ID" is set when using mopera U or mopera, connection is disabled. <Example> Setting under Windows XP Connect FOMA terminal to a PC. Connection procedure Click [ (Start)] Select "...
Page 540 [OK]. The area code differs depending on the PC environment. The code does not relate to Dialup connection (APN) setup. So no need to change. Check that "FOMA F903i" is set for " (Connection procedure)". Click [ (Cancel)] on the "...
Page 541 Check that "OK" is displayed and click " (File)" " (End HyperTerminal)". Click " (Yes)" to confirm disconnection " (No)" to confirm saving. Show/Hide caller ID function by dialup network settings The dialup network settings can also be used to append 186 (ON)/184 (OFF) to the dialup connection number.
Page 542 Click " (New connection wizard)" in " (Network task)". Click [ (Next)]. Select " (Connect to Internet)" and click (Next)]. Select " (Set up connection manually)" and click [ (Next)].
Page 543 (Use dialup modem to connect)" and click [ (Next)]. Select only " FOMA F903i (COMx) (Modem: FOMA F903i (COMx))" and click [ (Next)]. Depending on the PC environment, x represents different numbers. When there is 1 modem installed, this screen is not displayed.
Page 544 For 64K data communication Enter the dialup connection number. Enter " 8701" to connect to mopera U or " 9601" to connect to mopera. Enter " (User name)" " (Password)" " (Password confirmation entry)" Select all items as shown below and click [ (Next)].
Page 545 Check the setting of each item in [ (General)] tab. If multiple modems are installed in the PC, check that " FOMA F903i (COMx) (Modem: FOMA F903i (COMx))" is only selected under " (Connection method)" item (Depending on the PC environment, x represents different numbers). Uncheck ( ) "...
Page 546 Click [ (Network)] tab and set each item as shown below. Since "QoS (QoS packet scheduler)" settings in " (Use these items for this connection)" field can not be changed, leave it as it is. When settings of IP and DNS information have been requested from the provider, etc. select " (TCP/IP) (Internet protocol)", click [ (Property)] and set necessary information.
Page 547 Setting dialup network for Windows 2000 Setting dialup connection Click [ (Start)] Select " (Programs)" " (Accessories)" " (Communication)" Click " (Network and dialup connections)" and double-click [ (Create new connection)] icon. When " (Location information)" screen is displayed, perform the following operations: a Enter the area code in "...
Page 548 (Connect to Internet using phone line and modem)" and click [ (Next)]. Check that "FOMA F903i" is set for " (Select modem to use for connection to Internet)" and click (Next)]. When there is 1 modem installed, this screen is not displayed.
Page 549 For 64K data communication Enter the dialup connection number. Enter " 8701" to connect to mopera U or " 9601" to connect to mopera. Uncheck ( ) " (Use area code and dial information)". Set each item in [ (Connection)] tab as shown below. Click [ (Address)] tab and set each item as shown below.
Page 550 Click [ (Next)]. Enter " (User name)" " (Password)" and click (Next)]. When the access point is mopera U or mopera, you do not need to enter " (User name)" or " (Password)". When you click [ (Next)] and the screen to confirm the blank entry appears, click [ (Yes)].
Page 551 (General)] tab. If multiple modems are installed in the PC, check that " FOMA F903i (COMx) (Modem: FOMA F903i (COMx))" is only selected under " (Connection method)" item (Depending on the PC environment, x represents different numbers). When the modem is changed, all items in "...
Page 552 Click [ (Network)] tab and set each item as shown below. Click [ (Set)] Uncheck all items ( ) and click [OK]. Click [OK]. Performing communication...
Page 553 160 characters including "AT". AT command input mode To operate FOMA terminal using AT commands, the PC must be in terminal mode. Terminal mode is a mode that lets the PC operate as a single communication terminal. When terminal mode is set, the characters entered from the keyboard are sent directly to the communication port to operate FOMA terminal.
Page 554: At Command List
I Entering " " may cause "\" to appear depending on the font setting for the PC or communication software. I If the battery pack is removed from FOMA terminal before the terminal power is turned off, the setting values may not be recorded.
Page 555 : Busy tone detected, dial tone detected, and speed is displayed (default) When n=0 is set, AT&E and AT V command will be unavailable. FOMA terminal AT command settings are reset to the status of nonvolatile memory. When this command is executed during communication, the terminal is reset after the line is disconnected (displaying "NO CARRIER").
Page 556 When Show/Hide caller ID is specified by dialup network DGPIR? : Displays current settings DGPIR=? : Displays a list of assignable values DRPW Indicates an index for the reception power of the radio signals that FOMA terminal receive in the " DRPW : <n>" format. DRPW...
Page 557 AT+CMEE? : Displays current settings AT+CMEE=? : Displays a list of assignable values AT+CNUM Displays FOMA terminal's own phone number in the "+CNUM : ,<number>,<type>" format. number : Own phone number AT+CNUM type=129 : International access code + not included +CNUM : ,"+819012345678",...
Page 558 AT+GMR Displays FOMA terminal version in "VerX.XX" format. AT+GMR Ver1.00 AT+IFC=<n,m> Sets how to control local flow between the PC and the FOMA terminal. n : DCE by DTE m : DTE by DCE AT+IFC=2,2 0 : No flow control...
Page 559 <APN> Optional Note: <cid> is the number used to control dialup connection (APN) for packet communication to be registered in FOMA terminal. "1-10" can be registered in FOMA terminal. "mopera.ne.jp" (APN) to connect to mopera is registered in cid1 and "mopera.net" (APN) to connect to mopera U is registered in cid3 by default.
Page 560 <Maximum bitrate DL> None (default) or 384 Note: <cid> is the number used to control dialup connection (APN) for packet communication to be registered in FOMA terminal. "1-10" can be registered in FOMA terminal. "mopera.ne.jp" (APN) to connect to mopera is registered in cid1 and "mopera.net"...
Page 561 CONNECT 230400 230400bps CONNECT 460800 460800bps Note: To retain compatibility with a modem connected via conventional RS-232C, communication speed is displayed, but it differs from the actual connection speed because FOMA terminal is connected to the PC with a USB cable.
Page 562 1 21 When ATX1, AT V1 is set The code is displayed upon completion of connection in the following format: "CONNECT<speed between FOMA terminal - PC> <Communication protocol><dialup connection (APN)>/<upstream maximum speed (between FOMA terminal radio base station)>/<downstream maximum speed (between FOMA terminal radio base station)>"...
Page 563: Kuten Code List
Kuten Code List CA92002-4966...
Page 564 Kuten Code List * For entering characters using code, see "Entering characters using code" in the attached manual. * Note that some characters in the code input list may look different from actual ones. 4th digit of code 4th digit of code 4th digit of code -3rd -3rd...
Page 565 4th digit of code 4th digit of code 4th digit of code -3rd -3rd -3rd...
Page 566 4th digit of code 4th digit of code 4th digit of code -3rd -3rd -3rd...
Page 567 4th digit of code 4th digit of code 4th digit of code -3rd -3rd -3rd...

Foma F903i' 06.10 User Manual

Easy Search

Caution

Before Using F903I

Voice Call/Videophone Call

Pushtalk

Phonebook

Safety Settings

I-Mode/I-Motion/I-Channel

I-Αppli

Osaifu-Keitai/Toruca

Gps Function

Making Full Use of Image

Playing Music

Network Service

Data Communication

Quick Links

Chapters

Related Manuals for Foma F903i' 06.10

Summary of Contents for Foma F903i' 06.10