Advertisement
･
Talk by one of following methods, holding your
FOMA terminal at about 5 cm distance.
Accuracy of voice recognition is improved when
you talk holding your FOMA terminal beside
your face just like you talk normally.
･
In the same way as you speak over the
phone, open the FOMA terminal and hold it
beside your face
･
Hold it in the front of your face
･
Speak as clearly as possible. Please do not
register in a low or a loud voice.
･
Be careful not to cover the microphone with
your finger.
･
Please note that voice data could be certified by
a voice of another person, if the word with any
sounds of サ(sa) line (such as シャ (sha), シュ
(shu), ショ (sho)) are used.
･
It may become hard to be certified if the
following words are used:
･
With some prolonged sounds(−) such as
"セーター " (sweater)
･
With some geminate consonants(っ ) such as
"とっちゃって" (tocchatte)
･
Please do not make the sound that is unrelated
to the voice data, such as clearing your throat,
"Uh...", or tongue-clicking. In addition, please do
not blow your breath to a microphone.
･
Be careful not to make the silence part while
you are recording. Talking too slowly may be
considered as a silence part, and may not be
recorded correctly.
Default Security code
m644
1
2
Enter the terminal security code
3
Select Cancel method field
･
To set the authentication operation to the
terminal security code input only: 1
Step 7
4
Select Record in Voice data field
･
When the voice data is already recorded, after
selecting Record, a confirmation screen
appears asking whether to overwrite.
5
6
7
z
2
INFORMATION
Since the voice of a person will change by age or other
●
z
reasons, using the same keyword for long term may
Go to
become hard to match to the recorded voice data. In that
case, please register the voice data again
z
o
Voiceprint authentication makes no warranty of complete
●
certification. For any damage or loss, which the user
shall sustain by having been used by a third party or
misauthentication of voiceprint, NTT DoCoMo assumes
no responsibility.
Setting IC Card Lock automatically
You can set to lock IC card automatically after the
specified time (1 to 90 minutes) is past.
Default OFF
1
o
After about 2 seconds, a beep is heard and
recording starts.
Say the keyword within 5 seconds
z
Say the keyword again within 5 seconds
･
A confirmation screen appears in following
cases. Press o to retry from Step 5, and
change the volume of voice or the keyword.
･
When a voice is small
･
When keyword is short/long
･
When there are few syllables
･
When there is the noise around
･
When the first and second keyword did not
match
Press p
m643
･
When there is a
noise around, Please
try again to record in
quiet place. is
displayed. Press o
and retry.
z
o
･
Record the keyword
twice. It is registered
when the first and
second recording
match.
･
To stop the
recording: o
Menu 83132
Timed Lock
Next
301
Advertisement
Chapters
