Advertisement
●The image and video is displayed as
.
If the data has been destroyed, it cannot be correctly
displayed and
or
●The screen reacts slowly when a key is
pressed.
While transferring large-size data between FOMA
terminal and miniSD memory card, reactions on the
FOMA terminal screen may have a delay.
Example of Error messages
Main error messages displayed on FOMA terminal are shown in the alphabetical order as follows:
･
The "(number)" or "XXX" in error messages is a code used to distinguish the error sent from the i-mode
Center.
●Address is not valid. (451)
Failed to transmit the i-mode Mail or
SMS messages. Make sure if the
address is correct.
●Authentication interrupted.
Displayed when you stop
authentication on the screen.
●Authentication type is not
supported. (401)
The authentication type is not
supported and connection to the
specified i-mode or internet web site
is disabled.
●Cannot execute because of
other tasks.
･
Stop all other functions running
before executing.
･
Cannot be executed because the
pattern definition is being updated.
Execute after completing updating.
●Can not open any more
window.
Cannot open a new window because
the number of windows or frames is
too many. It may be displayed when
closing the open windows.
●Cannot save to a miniSD
card. Saving to phone
memory.
The still image/video with recorded
Chara-den downloaded for which
Rec. File Restriction has already
been set to File restricted cannot be
saved to a miniSD memory card.
The Rec. File Restriction setting
cannot be changed.
and
appears.
●Certificate is
rejected.(tampered)
The site certificate is altered.
Connection is suspended.
●Chat mail data damaged.
Restore default settings?
The data of chat mail contains error.
Select Yes to return to the default
setting. Select No to quit chat mail
without returning to the default
setting.
●Check address.
Failed to transmit SMS. Make sure if
the address is correct.
●Check address.
The mail address in the mail group
contains error or no mail address is
entered.
Check the mail address.
●Check SMS center setting.
SMS setting at SMSC is incorrect.
Check the setting. ☛P266
●Connection failed.
Failed to connect to the i-mode
Center. Please move to another
location with good radio reception
and retry.
●Connection failed. (403)
Failed to connect due to some cause
such as connection to the specified
i-mode or Internet web site was
rejected.
●Connection failed. (503)
Failed to connect because of the
maintenance of the server or
congestion of the line.
Please retry after a while.
Other
●Function of IC card is disabled.
･
Have you IC Card Lock set to ON? Or is IC Card Lock
set to ON automatically by Timed Lock? ☛P300, P301
･
If the battery pack is not connected properly or
removed, the function of IC card is disabled because IC
Card Lock is set. Check if the battery pack is connected
properly and turn power off and then back on. ☛P41
●Connection failed. (562)
Failed to connect to the i-mode
Center. Please move to another
location with good radio reception
and retry.
●Connection interrupted.
Please move to another location with
good radio reception and retry. If the
error persists, try again later.
●Contains bad data.
i-
ppli cannot be started from invalid
α
data read with Bar Code Reader.
●Continue using i-
transmit data?
The number of transmission is
extremely large within the specified
duration when using i-
i-
ppli tried to transmit again after
α
the message Data transmission is
frequent. Continue transmission? was
displayed. Select Yes to use i-
successively, Terminate i-
quit i-
●Data damaged. Restore
default settings?
The data of the mail or ToruCa
contains error. Select Yes to return to
the default setting. Mail or ToruCa
cannot be started without restoring
the default setting.
●Data error. Unable to
download.
The data of ToruCa (details) is
invalid.
Error Message
ppli and
α
ppli and
α
ppli
α
ppli to
α
ppli.
α
Next
449
Advertisement
Chapters
