Advertisement
･
If you enter only hour and minute in 4 digits, the
current date is assumed. However, if you enter
hour and minute earlier than the current time,
the next day is assumed.
2
Save the schedule
INFORMATION
You cannot set long term schedule and repeat schedule
●
at the same time.
You can change the schedule alarm screen by the
●
following procedure. The last settings take effect.
･
Select a video/i-motion on the Set alarm screen*
･
If a video/i-motion is set as a schedule reminder of
Sound Setting, select Terminal setting on the Set alarm
screen*
1
.
･
Select an image on the Other settings screen*
*1 If you perform this setting when an image has already
been set on the Other settings screen, Image is
switched to No.
*2 If you perform this setting when a video/i-motion has
already been set for Alarm on time or Alarm in
advance, it is switched to Melody (default).
If you delete the data specified as a schedule alarm or
●
alarm in advance, Terminal setting is assumed.
It is recommended that you keep a separate written record
●
of the contents of Scheduler.
Schedules can be saved using the miniSD memory card
(☛P336). Data link software and the FOMA USB cable
(optional) can be used to send and save the data to the PC.
When the set time comes
1
The alarm sounds
Schedule alarm screen
Press f to stop the alarm
2
The screen before the alarm reappears.
･
The alarm stops when a minute has passed
without any operation or any key or button
other than f is pressed. The schedule
alarm screen depends on the setting as
follows. To return to the display before the
alarm, press o.
Setting
Image
video/i-motion
1
.
2
.
The schedule alarm
operates according to
the settings. If an
image or video/i-motion
is set for the schedule
alarm, it is displayed. If
Created animation is
set for the image, the
first frame is displayed.
Display
Set image
First frame
･
When multiple schedules are set for the same
date/time, you can check other schedules by
& after stopping the alarm.
･
For alarm indication while another function is
being used ☛P368
･
The schedule does not operate when Privacy
Mode is on (Schedule is set to Authorized access).
When Secret Attribute is set, you need to set
Secret Mode to enable the schedule. If the
schedule alarm is not issued at the set date/time
in any cases other than the above, see "Alarm
clock does not ring at the set time". ☛P369
INFORMATION
The alarm sounds at the volume set by Schedule reminder.
●
If light alert or vibrator is set as a schedule reminder,
●
lighting and vibration occur according to the settings.
An alarm in advance, when set, sounds before the
●
schedule start time.
When you set schedule alarm with All day, the alarm
●
operates at 00:00 on the set date.
Setting defaults for the schedule alarm
Set the defaults for the schedule alarm of a new
schedule to be added.
･
If you change the defaults, it may not affect the
settings of the registered schedules.
Default all Alarm:Yes
Hold down p for over a second
1
m65
2
Select each item to set
Set by scheduler：
Set the default values of the schedule alarm
for registering schedules from the calendar
screen.
Set by quick-schedule：
Set the default of the schedule alarm for
registering schedules from the calendar screen.
Press p
3
Checking saved schedule data
You can add, change and delete the schedules from
the displayed screen.
Reminder Option
z
Next
373
Advertisement
Chapters
